Table Of ContentR Wear 195 (1996) 241
Author Index of Volume 195
Afaghani, J.E.D., 223 Ganghoffer, J.F., 81 Masuda, M., 178 Ueno, Y., 162
Ge, Q., 100 Mori, K., 162
Bai, M., 66, 100, 152 Gibson, E.D., 214 Mostafa, I.M., 186
Balazinski, M., 206 Guo, H., 152 Murugappan, M., | Verhoeven, J.D., 214
Viallier-Raynard, P., 192
Brillard, A., 81
Vincent, L., 21
Bueno, M.-A., 192
Horaguchi, I., 223 Nakamoto, T., 223
Campos, A., 53 Hsu, S.M., 35, 90, 112, 169 Wang, B.-J., 133
Chen, Z., 214 Hutchings, I.M., 232 Rajurkar, K.P., 1 Wang, H., 47
Chujo, Y., 178 Ramamoorthy, B., 148 Wang, Y., 35, 90, 112
Jiang, J.-Q., 106 Ramesh, S., 148 Wang, Z.Y., 1
Dang Van, K., 21 Jianxin, D., 128 Renner, M., 192
Dharan, C.K.H., 123 Jin, Y., 47
Xia, W., 47
Saka, N., 133
Eda, H., 74 Xing, A., 128
Ehni, P.D., 7 Kapsa, Ph., 21 Schultz, J., 81 Xue, Q., 66, 100, 152
Kasashima, N., 162 Seabra, J., 53
El Baradie, M.A., 201
Klim, Z., 206 Singer, I.L., 7
El-Tayeb, N.S.M., 186
Kuroshima, Y., 178 Sottomayor, A., 53 Yamaguchi, K., 223
Ennajimi, E., 206
Stevenson, A.N.J., 232 Yen, B.K., 123
Yoshioka, T., 162
Fayeulle, S., 7 Lamy, B., 192
Fortin, C., 206 Liu, H., 169 Tan, R.-S., 106
Fouvry, S., 21 Liu, P., 214 Tomita, Y., 74 Zhaogian, L., 128
Elsevier Science S.A.
ELSESiV I8ESR
Wear 195 (1996) 243-245
Subject Index of Volume 195
Abrasion test wear and wear transition mechanisms of ceramics, 112
development of the dry sand/rubber wheel abrasion test, 232 modeling of microfracture-induced wear and wear transition in sliding
Abrasive wear of polycrystalline alumina ceramics, 169
a study on abrasive resistance of Ni-based coatings with a WC hard Clearance angle
phase, 47 the effect of varying the workpiece diameter on the cutting tool
a model for the abrasive wear of fiber-reinforced polymer composites, clearance angle in tool-life testing, 201
123 Composite
the effect of laminate orientations on friction and wear mechanisms of the effect of laminate orientations on friction and wear mechanisms of
glass reinforced polyester composite, 186 glass reinforced polyester composite, 186
Additives sliding wear behavior of deformation-processed Cu—15vol.%Cr in situ
wear of 2024 Al-Mo-SiC composites under lubrication, 100 composites, 214
Ag-based composites Composite coatings
spark erosion behavior of silver-based particulate composites, 133 a study on abrasive resistance of Ni-based coatings with a WC hard
Alumina phase, 47
the effects of operating parameters and environment on the wear and Composites
wear transition of alumina, 90 a model for the abrasive wear of fiber-reinforced polymer composites,
wear and wear transition mechanisms of ceramics, 112 123
modeling of microfracture-induced wear and wear transition in sliding Contact area
of polycrystalline alumina ceramics, 169 modeling of microfracture-induced wear and wear transition in sliding
Aluminum of polycrystalline alumina ceramics, 169
tribological properties of SiC whisker and molybdenum particle- Convergence
reinforced aluminum matrix composites under lubrication, 66 a deductive theory of friction. II: Mathematical study, 81
Aluminum matrix composites Crack nucleation
wear of 2024 Al-Mo-SiC composites under lubrication, 100 theoretical analysis of fatigue cracking under dry friction for fretting
reciprocal sliding wear of SiC particle reinforced Al-Cu aluminum loading conditions, 21
matrix composites against stainless steel, high speed tool steel and Critical damage stress
ceramics. I. Tribological properties and construction of tribo-maps, wear and wear transition modeling of ceramics, 35
152 Cryogenic turning
Auger spectroscopy cryogenic PCBN turning of ceramic (Si;N,), |!
wear behavior of triode-sputtered MoS, coatings in dry sliding contact Cu-Cr
with steel and ceramics, 7 sliding wear behavior of deformation-processed Cu—15vol.%Cr in situ
composites, 214
Bonding resin Cutting
a study of the ultra precision grinding process on a magnetic disk whisker behaviors and tool wear in cutting of unidirectional SiC
substrate—development of new bonding materials for fixed whisker-reinforced plastic, 223
abrasives of grinding stone, 74 Cutting tool
Boron nitride the effect of varying the workpiece diameter on the cutting tool
cryogenic PCBN turning of ceramic (Si,N,), 1 clearance angle in tool-life testing, 201
cutting tool reliability analysis for variable feed milling of 17-4PH
stainless steel, 206
Cemented carbide
the machinability of sintered carbons based on the correlation between
tool wear rate and physical and mechanical properties, 178 Dang Van’s fatigue criterion
Ceramic bearings theoretical analysis of fatigue cracking under dry friction for fretting
wear behavior of triode-sputtered MoS, coatings in dry sliding contact loading conditions, 21
with steel and ceramics, 7 Deformation processing
Ceramic composite sliding wear behavior of deformation-processed Cu—15vol.%Cr in situ
friction and wear behavior of Al,O,/TiB, composite against cemented composites, 214
carbide in various atmospheres at elevated temperature, 128 Diffraction
Ceramics measurement of surface finish using an optical diffraction technique,
cryogenic PCBN turning of ceramic (Si,N,), 1 148
wear and wear transition modeling of ceramics, 35 Discrete wavelet transform
the effects of operating parameters and environment on the wear and prediction of spalling on a ball bearing by applying the discrete
wear transition of alumina, 90 wavelet transform to vibration signals, 162
Elsevier Science S.A.
244 Subject Index of Volume 195 / Wear 195 (1996) 243-245
Dry wear Load
dry sliding wear of an alumina short fibre reinforced Al-Si alloy development of the dry sand/rubber wheel abrasion test, 232
against steel, 106 Lubrication
non-Newtonian EHL model for traction evaluation in a roller—inner
Elastohydrodynamic lubrication ring contact in a roller bearing, 53
non-Newtonian EHL model for traction evaluation in a roller—inner tribological properties of SiC whisker and molybdenum particle-
ring contact in a roller bearing, 53 reinforced aluminum matrix composites under lubrication, 66
Erosion
spark erosion behavior of silver-based particulate composites, 133 Machinability of sintered carbon
Error estimates the machinability of sintered carbons based on the correlation between
a deductive theory of friction. I]: Mathematical study, 81 tool wear rate and physical and mechanical properties, 178
Existence and uniqueness Maximum tensile stress
a deductive theory of friction. II: Mathematical study, 81 wear and wear transition modeling of ceramics, 35
Metal matrix composites
Fiber reinforcement tribological properties of SiC whisker and molybdenum particle-
a model for the abrasive wear of fiber-reinforced polymer composites, reinforced aluminum matrix composites under lubrication, 66
123 dry sliding wear of an alumina short fibre reinforced Al-Si alloy
against steel, 106
Fixed abrasive
Microfracture
a study of the ultra precision grinding process on a magnetic disk
substrate—development of new bonding materials for fixed modeling of microfracture-induced wear and wear transition in sliding
abrasives of grinding stone, 74 of polycrystalline alumina ceramics, 169
Fragmented layer Molybdenum
dry sliding wear of an alumina short fibre reinforced Al-Si alloy wear of 2024 Al-Mo-SiC composites under lubrication, 100
against steel, 106 MoS, coatings
Fretting wear behavior of triode-sputtered MoS, coatings in dry sliding contact
with steel and ceramics, 7
theoretical analysis of fatigue cracking under dry friction for fretting
loading conditions, 21 Multiple regression analysis
Fretting static fatigue the machinability of sintered carbons based on the correlation between
theoretical analysis of fatigue cracking under dry friction for fretting tool wear rate and physical and mechanical properties, 178
loading conditions, 21
Friction Non-Newtonian behaviour
a deductive theory of friction. Il: Mathematical study, 81 non-Newtonian EHL model for traction evaluation in a roller—inner
reciprocal sliding wear of SiC particle reinforced Al—Cu aluminum ring contact in a roller bearing, 53
matrix composites against stainless steel, high speed tool steel and
ceramics. I. Tribological properties and construction of tribo-maps, Orientation
152 the effect of laminate orientations on friction and wear mechanisms of
the effect of laminate orientations on friction and wear mechanisms of glass reinforced polyester composite, 186
glass reinforced polyester composite, 186 whisker behaviors and tool wear in cutting of unidirectional SiC
tribological investigation of textile fabrics, 192 whisker-reinforced plastic, 223
Friction and wear
friction and wear behavior of Al,O,/TiB, composite against cemented
Partial slip
carbide in various atmospheres at elevated temperature, 128
theoretical analysis of fatigue cracking under dry friction for fretting
Friction force
loading conditions, 21
development of the dry sand/rubber wheel abrasion test, 232
Plasma-spray and post treatment
a study on abrasive resistance of Ni-based coatings with a WC hard
Glass laminate phase, 47
the effect of laminate orientations on friction and wear mechanisms of Plastically deformed layer
glass reinforced polyester composite, 186 dry sliding wear of an alumina short fibre reinforced Al-Si alloy
Grain size against steel, 106
whisker behaviors and tool wear in cutting of unidirectional SiC Plastic composite
whisker-reinforced plastic, 223 whisker behaviors and tool wear in cutting of unidirectional SiC
Graphical filtering whisker-reinforced plastic, 223
measurement of surface finish using an optical diffraction technique, Polycrystalline diamond
148 whisker behaviors and tool wear in cutting of unidirectional SiC
Grinding stone whisker-reinforced plastic, 223
a study of the ultra precision grinding process on a magnetic disk Polymers
substrate—development of new bonding materials for fixed a model for the abrasive wear of fiber-reinforced polymer composites,
abrasives of grinding stone, 74 123
Inclined-plane sliding Reliability
wear and wear transition mechanisms of ceramics, 112 cutting tool reliability analysis for variable feed milling of 17-4PH
Indentation stainless steel, 206
wear and wear transition mechanisms of ceramics, 112 Removal rate
In-process monitoring a study of the ultra precision grinding process on a magnetic disk
prediction of spalling on a ball bearing by applying the discrete substrate—development of new bonding materials for fixed
wavelet transform to vibration signals, 162 abrasives of grinding stone, 74
Subject Index of Volume 195 / Wear 195 (1996) 243-245
Roller bearing Tool
non-Newtonian EHL model for traction evaluation in a roller—inner whisker behaviors and tool wear in cutting of unidirectional SiC
ring contact in a roller bearing, 53 whisker-reinforced plastic, 223
Rolling bearing Tool life
prediction of spalling on a ball bearing by applying the discrete the machinability of sintered carbons based on the correlation between
wavelet transform to vibration signals, 162 tool wear rate and physical and mechanical properties, 178
Roughness the effect of varying the workpiece diameter on the cutting tool
measurement of surface finish using an optical diffraction technique, clearance angle in tool-life testing, 201
148 Tool wear
tribological investigation of textile fabrics, 192 cryogenic PCBN turning of ceramic (Si,N,), 1
Rubber hardness the machinability of sintered carbons based on the correlation between
development of the dry sand/rubber wheel abrasion test, 232 tool wear rate and physical and mechanical properties, 178
Traction
non-Newtonian EHL model for traction evaluation in a roller—inner
ring contact in a roller bearing, 53
Sanding
tribological investigation of textile fabrics, 192 Variable feed machining
Silicon carbide cutting tool reliability analysis for variable feed milling of 17-4PH
wear and wear transition mechanisms of ceramics, 112 Stainless steel, 206
Silicon carbide whisker Vibration
whisker behaviors and tool wear in cutting of unidirectional SiC prediction of spalling on a ball bearing by applying the discrete
whisker-reinforced plastic, 223 wavelet transform to vibration signals, 162
Silicon nitride Viscoplastic behaviour
wear and wear transition mechanisms of ceramics, 112 a deductive theory of friction. II: Mathematical study, 81
Sliding speed
development of the dry sand/rubber wheel abrasion test, 232 Wear
Sliding wear tribological properties of SiC whisker and molybdenum particle-
modeling of microfracture-induced wear and wear transition in sliding reinforced aluminum matrix composites under lubrication, 66
of polycrystalline alumina ceramics, 169 the effects of operating parameters and environment on the wear and
sliding wear behavior of deformation-processed Cu—15vol.%Cr in situ wear transition of alumina, 90
composites, 214 wear of 2024 Al-Mo-SiC composites under lubrication, 100
Solid lubrication wear and wear transition mechanisms of ceramics, 112
wear behavior of triode-sputtered MoS, coatings in dry sliding contact reciprocal sliding wear of SiC particle reinforced Al—Cu aluminum
with steel and ceramics, 7 matrix composites against stainless steel, high speed tool steel and
Spalling ceramics. I. Tribological properties and construction of tribo-maps,
prediction of spalling on a ball bearing by applying the discrete 152
wavelet transform to vibration signals, 162 Wear map
Spark reciprocal sliding wear of SiC particle reinforced Al-Cu aluminum
spark erosion behavior of silver-based particulate composites, 133 matrix composites against stainless steel, high speed tool steel and
Spectral analysis ceramics. I. Tribological properties and construction of tribo-maps,
tribological investigation of textile fabrics, 192 152
Steel bearings Wear mechanism
wear behavior of triode-sputtered MoS, coatings in dry sliding contact wear and wear transition modeling of ceramics, 35
with steel and ceramics, 7 wear and wear transition mechanisms of ceramics, 112
Stone wear friction and wear behavior of Al,O;/TiB, composite against cemented
a study of the ultra precision grinding process on a magnetic disk carbide in various atmospheres at elevated temperature, 128
substrate—development of new bonding materials for fixed Wear mechanisms
abrasives of grinding stone, 74 wear behavior of triode-sputtered MoS, coatings in dry sliding contact
Stylus measurement with steel and ceramics, 7
measurement of surface finish using an optical diffraction technique, Wear model
148 wear and wear transition modeling of ceramics, 35
Wear rate
Surface roughness
dry sliding wear of an alumina short fibre reinforced Al—Si alloy
a study of the ultra precision grinding process on a magnetic disk
against steel, 106
substrate—development of new bonding materials for fixed
Wear transition
abrasives of grinding stone, 74
the effects of operating parameters and environment on the wear and
wear transition of alumina, 90
wear and wear transition mechanisms of ceramics, 112
Textile fabrics modeling of microfracture-induced wear and wear transition in sliding
tribological investigation of textile fabrics, 192 of polycrystalline alumina ceramics, 169
Third body Wear transition model
a deductive theory of friction. II: Mathematical study, 81 wear and wear transition modeling of ceramics, 35
TiB, Workpiece diameter
friction and wear behavior of Al,O,/TiB, composite against cemented the effect of varying the workpiece diameter on the cutting tool
carbide in various atmospheres at elevated temperature, 128 clearance angle in tool-life testing, 201
a
peer
a
