Table Of ContentManufacturer's Approved Products List 1
WATERMAIN
*All listed water appurtenances must comply to NSF 61 standards
Product Type Specifications Manufacturer Description/Model Comments
Class 52
ANSI A21.51 (AWWA C151) • Furnished with push-on Tyton® Joints as per ANSI A21.11
Cement-mortor lined as per (AWWA C111)
Ductile Iron ANSI A21.4 (AWWA C104) Canada Pipe Class 52
Installed with polyethylene
• Polyethylene encasement shall be installed in accordance
encasment as per ANSI A21.5
with manufacturers specifications and instructions
(AWWA C105)
Ipex Blue Brute • Rubber gasketed bell and spigot joints
Pipe Up To and DR 18 National Pipe Dura Blue • Installed with 12 Gauge stranded tracer wire
Including 400mm Polyvinyl Chloride • Joints restrained where required by design and wrapped
Diameter (PVC ) Next Polymers Aqualoc with corrosion protective system
AWWA C900-16
Diamond Plastics Corp. PR 235
Royal Pipe Systems C900 High Pressure
Pressure Rating 235 psi • Rubber gasketed bell and spigot joints
Molecularly
AWWA 909-09 • installed with 12 gauge stranded tracer wire.
Oriented Poly Vinyl Ipex Bionax
Chloride PVCo
• Joints restrained where required by design and wrapped
CSA B137.3
with corrosion protective system
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 2
WATERMAIN
Forterra
Concrete Pressure
AWWA C301 and C304 or
Pipe 400 to
AWWA C303
500mm diameter
Decast
• Supplied with Bell and spigot joints
• Joints sealed with wrap around cement mortar diapers
• Shop drawings shall be supplied to the Region for review
and approval prior to construction
Pipe 400mm
• Restrained where required by design
Diameter Forterra
and Larger
*no longer Concete Pressure
accepting new Pipe > 600mm AWWA C301 and C304
submissions for diameter
products larger
Decast
than 400mm
ANSI A21.51-02 (AWWA C151)
Ductile Iron
• Furnished with push-on Tyton® Joints and polyethylene
400mm to 600mm Minimum Wall Thickness are as Canada Pipe Special Class 52
sleeve for encasement
diameter inclusive follows for Special Class 52:
400mm - 10.2mm, 450mm -
10.4mm, 500mm - 10.7mm,
600mm - 11.2mm
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 3
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
ANSI A21.10 Sigma
• Furnished with push-on Tyton Joints as per ANSI A21.11
(AWWA C111) complete with T-304 stainless steel nuts
Cast Iron and
AWWA C110 Star and bolts
Ductile Iron Long
Body Cement-mortor lined as per • Polyethylene encasement shall be installed in accordance
ANSI A21.4 (AWWA C104) Bibby with manufacturers specifications and instructions or
wrapped with corrosion protection system
Sigma
ANSI A21.53 • Mechanical type ends
SIP Industries
Ductile Iron
AWWA C153/C111 • Polyethylene encasement shall be installed in accordance
Compact Fittings
Star with manufacturers specifications and instructions or
Short Body
wrapped with corrosion protection system
Cement-mortor lined as per Bibby
Fittings ANSI A21.4 (AWWA C104) • Complete with T-304 stainless steel nuts and bolts
Ipex
AWWA C907
Polyvinyl Chloride
(PVC) up to
Royal
200mm Diameter • PVC Fittings to have fitting pipe restrainers
CSA B137.2 Galaxy • Joints restrained where required by design and wrapped
with corrosion protection system
• Complete with T-304 stainless steel nuts and bolts
Ipex
Polyvinyl Chloride AWWA C907
(PVC) 250mm & Royal
300mm Diameter
CSA B137.3 Galaxy
Victaulic • Acceptable for all AWWA approved pipes excluding PVC
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 4
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
Denso North America
Denso System Denso Paste, LT Paste, Profiling Mastic
Corrosion Inc.
Prevention System Petro Coating Systems PCS System PT150ST, PP04 and PM3ST
(3 stage system) Interprovincial Corrosion
Protective Coatings ANSI / AWWA C-217 Petroleum Wax Tape, Primer, Mastic
Applied to all Control LTD Petro Wrap System
metallic fittings and
RPH Distributors TC Envirotape, Enviroprime and Enviromastic
components
Advanced Corrosion SysPetro guard System Paste PP04ST, Mastic PM3ST, Tape PTLT
PVC Ring Lock
▪Installed with concrete thrust blocks (on existing pipe only)
PVCgrip 3500
in accordance with OPS standards
ASTM F1674 PVC Stargrip 4000 G2
Star Pipe Products Inc
Stargrip 4300 Series
Allgrip 3600 ▪Corrosion protection system (as per specs)
STD DWG 1-3-3A 1000-C MJ fittings only
Tufgrip Dual Wedge Orange colour coded 1500 series
Clow Canada Series 90 Flange Adapter
For PVC Pipe Series 300, 350, 360 Restrainers
EZ Grip PTP Series Bell joint restraint
SIP Industries Inc
EZ Grip for PVC Red colour coded
Smith-Blair 111 & 120 Cam lock'
All complete with 304 stainless
PV-Lok series PWM,
steel nuts & bolts
Sigma Corp PWP and PWPF
One-Lok SLC
Georg Fisher Multijoint 3000 Plus Transitional Joint Restraint System for HDPE
EBAA Iron Sales Inc. Megalug Series 1500, 1600, 2000, 2600
Romac Industries Inc. Grip Ring
UniFlange Series
PVC pipe used with Mech Joint/Push-On Fittings
1300C
UniFlange Series
Joint Restraints Ford Meter Box Co. Inc. For PVC pipe bell Joints
1350C
UniFlange Series
MJ retainer gland joint restraint
1500C
ASTM F1674 Ford Meter Box Co. Inc. Uni-Flange UFR 1369
EBAA Iron Sales Inc. 2600
Sigma PV-Lok PWPF
100mm to 300mm 1000-1100-1200G2
Star Pipe Products Inc PVC 3500C Series
For PVCO Pipe to
PVC Fittings Stargrip 4300 Series Orange colour coded
Tufgrip Dual Wedge Orange colour coded 1500 series
Clow Canada
360c
Clow Canada 390c
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 5
WATERMAIN
Sigma PV-Lok PWPF
400mm
Star Pipe Products Inc 1200R Series
For PVCO Pipe Tufgrip Dual Wedge Orange colour coded 1500 series
Bell and Spigot Clow Canada
ASTM F1674 390c
Push-On Joints
EBAA Iron Sales Inc. 1900
100mm to 300mm Sigma PV-Lok PWPF
PVC 3500C Series
Star Pipe Products Inc
1000-1100-1200G2
Uni-Flange UFR 1399
Ford Meter Box Co. Inc.
For PVCO Pipe Uni-Flange 1559
Bell and Spigot Tufgrip Dual Wedge Orange colour coded 1500 series
Push-On Joints Clow Canada 390c
Sigma PV-Lok PWP
400mm
Star Pipe Products Inc 1100 Series
Ford Meter Box Co. Inc. UFR 1559
300c
Clow Canada
ASTM F1674 Tuf Grip Dual Wedge Orange colour coded 1500 series
EBAA Iron Sales Inc. 19MJ00
PWM
Sigma
Sigma One-Lok SLC
PVC 3500 Series
100mm to 300mm Stargrip 4300 Series Orange colour coded 4300 series
Star Pipe Products Inc
For PVCO Pipe to PVC 4000 G2 Series
Mechanical -Joint PVC 1000 G2 Series
Fitting
Uni-Flange 1309
Ford Meter Box Co. Inc.
Joint Restraints Uni-Flange 1500
300c
Clow Canada
Tuf Grip Dual Wedge Orange colour coded 1500 series
400mm PV-Lok PWM
Sigma
One-Lok SLCE
PVC 1000 Series
Star Pipe Products Inc
PVC 4000 G2 Series
Allgrip 3600 Stargrip
ASTM F1674 Star Pipe Products Inc 3000 Stargrip
4300
UniFlange Series
Ford Meter Box Co. Inc.
1390D, 1400D
All complete with 304 stainless
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 6
WATERMAIN
All complete with 304 stainless
steel nuts & bolts Clow Canada Tufgrip Dual Wedge Orange colour coded 1500 series
For Ductile Iron Series 400 Flange Adapter
Pipe To be installed with 3 part
SIP Industries Inc EZ Grip for DI Black colour coded
corrosion protection system
Smith-Blair 111 & 120
Installed with concrete thrust
blocks (on existing pipe only) in Sigma Corp One-Lok SLD
accordance with OPS standards
EBAA Iron Sales Inc. Megalug Series 1100, 1500, 1600
Romac Industries Inc. Grip Ring
Klick-It ll -PCS Ltd Model C8816 connectors shall be used on all non-metallic wms, hydrant
Connectors For Tracer Wire approved for direct bury
Dryconn_King Innov. R Blue (Lug Type) laterals & non metallic water services (std dwg 1-7-10)
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 7
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
all wm couplings must be self restrainer type or installed
Dresser Piping Style 53 and 153
with approved restrainers
Specialities
Style 38 for 400mm watermains and larger
Cambridge Model 3501
Smith Blair Inc. Model 441, 471 to 476 'pipe lock' restrained coupling
Style #44
Victaulic Co.of Canada
Complete with T-304 stainless
Ltd. Style #31 ductile housing with grade "M" gasket
steel nuts and bolts
TPS-Cromer Ind Corp Hymax 2000 Flexible to be installed with split-ring restrainer/tie-rods
Transition Robar Industries 1406
Couplings Axilock & Axiflex Non restraint
Teekay (Taylor Kerr ltd)
Repair Non restraint, for existing pipe only
Straub Tadco Straub Flex/Open
Manufacturing Straub Grip
Centre sleeves and end rings TPS-Cromer Ind Corp Hymax (Large Dia) to be installed with split-ring restrainer/tie-rods
shall be shop coated FC1, FC2A to be installed with approved restrainers
Ford Meter Box Co. Inc.
RCPP-x restrained coupling, PVC x PVC
Couplings 501 straight transition
Romac Industries Inc.
coupling
YNC Pipe Couplings
YNC Pipe Couplings all stainless steel
Inc.
Smith Blair Inc. Model 912
Dresser Piping
Style 127
Specialities
Viking Johnson MaxiDaptor
Complete with stainless steel Robar Industries 7406
Flanged Couplings
nuts and bolts Victaulic Co.of Canada
#341.2 ductile housing with grade "M" gasket
Ltd.
Romac Industries FCA 501
Series 90C for PVC pipe
Clow Canada
Series 40C for DI pipe
Insulating Smith Blair Inc. Model 416
Couplings Robar Industries 1406 complete with insulating boot
STD DWG 1-7-1 Blue Brute Tapped 150mm to 200mm PVC watermains in 19mm to 50mm
Tapped Couplings Ipex
AWWA C800 Coupling service sizes, restrained
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 8
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
STD DWG 1-6-1 & 1-6-2 ▪Zinc anode installed on operating rod just above drip lever
AWWA C502 Mueller Canada Canada Valve Century (Mueller Only)
FM approved
Sentinel
▪Two 63.5mm diameter hose Clow Canada
nozzles at 180 degree to each Concord D67-M ▪If a hydrant extension is required to adjust to the length of
other a hydrant barrel, it shall be obtained from the manufacturer
supplying the hydrant and installed as per the
manufacturers instructions
▪Hose nozzle and operating nut
Hydrants threads in accordance with Dry Barrel - Model
2700
Province of Ontario standards Clow-Bibby
▪Base (boot) with 150mm ▪Clow split coupling for Brigadier and Concord hydrant
McAvity M67B
mechanical connection end extensions
▪Safety breakaway flanges and
breakaway couplings
▪Painted to Region of Peel AVK 2700
specified colours (red and ▪Paint type and quality approved by the Region
silver)
Mueller Canada A769 with guide plate
Slide Type 108mm, 6mm
Clow-Bibby VB 1100 & V800 - Lid
predrilled round hole with
Conqueror B.M.Inc.
Valve Box grommet for tracer wire in upper
Star Pipe Products
section
R.B. Agarwalla & Co.
ASTM A48M-03 CLASS 30B
DomCast DF64
Sigma Corp
Less than or equal to 1.8m total Clow Canada
extension length Mueller Canada
Valve Box Sigma Corp.
Extension
R.B. Agarwalla & Co.
300mm and 600mm increments
Star Pipe Products
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 9
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
▪Rising spindle
Gate Valve <
Crane
100mm dia. ▪Installed in above ground applications or in chamber only
Gate Valve Mueller Canada A-2360
100mm - 200mm ▪T-304 stainless steel nuts and bolts, corrosion protection
Clow Canada F6102
dia. system
100mm to 300mm AVK Series 45 ▪ T-304 stainless steel nuts and bolts, corrosion protection
dia. Inclusive Clow Canada 2639/2640 system
Resilient Wedge AWWA C509 Mueller Canada A-2360 ▪Open left (counter clockwise)
Gate Valve Kennedy Valve Ken-Seal ▪50mm square operating nut
400mm J & S Valve Series 6600,6800,6900▪Inside non-rising stem
AWWA C509 AVK Series 25, 45 ▪Fusion Bonded Epoxy (FBE) Coated
Clow Canada M & H 4500 and 1450 ▪Actuators as per AWWA C504, Sec 4.5.8.5.3
600mm and larger Norriseal Norris 200 Series ▪Actuators no less than 90% grease packed and totally
Butterfly Valve AWWA C504 Mueller Canada Pratt sealed using gaskets, O-rings or similar means
DeZurik BAW ▪Open left (counter clockwise)
Val-matic American ▪Fusion Bonded Epoxy (FBE) Coated
Valves
Mueller Canada A-2600 ▪ T-304 stainless steel nuts and bolts, corrosion protection
*no longer
Val-matic Swingflex system
accepting new Check Valve
▪ Not to be used for backflow prevention unless two inline
submissions for Clow Canada Kenflex #506
and certified for that purpose
products larger
ANSI B16.1 Class 125 Model 310 (up to
than 400mm Zurn/Wilkins
Bypass inlet/oulet ports to be 200mm)
Detector Check ▪ 25mm bypass in brass only for all DCV, per STD 1-3-9
min 25mm Mueller Canada Model EDCIV (250mm)
Valve ▪ meter supplied/installed by Region Meter Dept
Suitable for continuous SS07F (200 & 250mm)
Watts/Ames
submerged conditions 1000DCV (all sizes)
T2360
Mueller Canada
A2360
▪100mm diameter and larger
Tapping Valve AWWA C509 AVK Series 45
▪All taps done by Region of Peel
Clow Canada
F6114
Cla-Val Series 90 ▪Model to be approved on a site specific basis
Pressure
Regulating Valve 106-PR, 206-PR ▪Provided with filter canisters
Singer
▪Provided with stainless steel rings
Cla-Val ▪Model to be approved on a site specific basis
Flow Control Valve ▪Provided with filter canisters
Singer
▪Provided with stainless steel rings
www.peelregion.ca Last Update: 2018-10-11
Manufacturer's Approved Products List 10
WATERMAIN
Product Type Specifications Manufacturer Description/Model Comments
Vent-O-Mat RBX Vented
143C, 145C, 149C
Apco
Threaded
Air Release 201C, 202C, 203C
Val-Matic
Threaded
UL 10.1, UL 20.1, UL
Air Valves Crispin
41.1
Air/Vacuum A.R.I D-040P, D-040CV
Release Floval Equipment Ltd Dezurik/APCO 'ASU'
Air Release
Backflow Val-Matic Floodsafe® (on all air valve installations)
Preventer
Watts Series 900 or 9D
Backflow Preventor Cla-Val Model 3 or R.P.
Febco 825Y
Sampling Station STD DWG 1-7-6 Green Eclipse style for Caledon only
Robar Industries 6606 with full liner
Ford Meter Box Co. Inc. Ford "Fast" all stainless steel
PVC Pipe Romac Industries SST
Smith-Blair Inc 663
Mueller Canada H304
All tapping sleeves to be Robar Industries 6606 with full liner
supplied with stainless steel Ford Meter Box Co. Inc. Ford "Fast" all stainless steel
(passive 304) nuts and bolts
Romac Industries SST
DI and CI
Smith-Blair Inc 663
H304
Mueller Canada
Tapping Sleeves H613 Ductile iron only
H304 SS 350mm and larger
Mueller Canada
H619 300mm and smaller
Robar Industries 6606 with full liner
Asbestos Cement Romac Industries SST
Pipe (rough barrel)
Ford Meter Box Co. Inc. Ford "Fast" all stainless steel
TPS-Cromer Ind Corp Ez-Tap Plus serv/sad all stainless steel-full seal
Smith-Blair Inc 663
Concrete Pressure Tapping sleeves to be supplied ▪spec to CPP C-301 or C-303
Pipe by corresponding manufacturer ▪installation & tap to be done by certified installer/welder
www.peelregion.ca Last Update: 2018-10-11
Description:Shop drawings shall be supplied to the Region for review and approval prior to
. Pratt sealed using gaskets, O-rings or similar means. DeZurik. BAW. ▫Open left
