Waste water aeration

20 Pages·2010·4.55 MB·English

AERATION
Water is
WASTE WATER AERATION
OXYGEN-ENRICHMENT
our element!
PUMPS
FISH TRANSPORT
FEEDING
2019/ 2020
CONTROL SYSTEMS
Made in Germany EQUIPMENT
WASTE WATER AERATION
For more than 25 years we have also been TURBO-JET waste water is available in Send us your inquiry with the conditions
supplying our aeration units for waste power ratings up to 4.0 kW. The system is of your case of use. The easiest way is to
water applications. Of course – due to the suitable for equipping sewage treatment calculate the number of units and the
harder operating conditions – other ma- plants with a connected load of up to engine power if we know the required
terials are used. 10,000 population equivalents (P.E.). The oxygen input for the plant. If this is not the
price-performance ratio of our system is case, it can usually be calculated accor-
But the basic idea is the same: Simple and
unbeatable wherever decentralised was- ding to the ATV worksheet - we are happy
uncomplicated oxygen input in connec-
tewater ponds and sewage treatment to help.
tion with good mixing of the complete
plants have to be ventilated.
tank or pond volume with floating devi-
ces - without costly and time-consuming TURBO-JET is always an alternative to
installation work. retrofitting ponds or plants when the
oxygen input of the existing aeration
Our waste water aeration system TURBO-
technology is no longer sufficient due to
JET works under the water surface – this is
additional loads. TURBO-JET is also the so-
necessary in the waste water area in order
lution for many industrial applications.
to avoid unwanted odour formation.
13 LINN
Waste water
Turbo-Jet waste water The TURBO-JET wastewater aerator, ma-
nufactured in various variants, offers ver-
satility and flexibility, so that an effective
solution can be offered for every waste-
water treatment application, particularly
in rural areas. Our waste water aeration
system TURBO-JET is a handy device
for aeration and circulation in the waste
water sector. The unit is equipped with a
submersible motor, i.e. it works below the
water level. In this way, aerosol formation
and running noises are largely avoided.
The heart of the TURBO-JET wastewater
In addition to the enormous circulation,
aeration system is the aeration unit. The
the directly driven axial display wheel also
main component is the robust submersi-
ensures the desired fine to medium-bub-
ble motor (protection class IP 68). All ma-
ble air-water mixture. This guarantees a
terials have been selected for tough use in
good oxygen input and a large effective
waste water and have proven themselves
zone. By means of additional controls on
over many years.
the air intake system, the ventilation and
circulation processes can be realised al- The motor pot is made of grey cast iron
ternately as required. (GG 25) and is therefore robust and du-
rable. Motor shaft, brackets and screw
In this way, nitrification and denitrifica-
connections are made of stainless steel.
tion processes can also be achieved with
The engine is sealed with a mechanical
little effort. Additional agitators are not
seal in an oil bath (vegetable engine oil).
required. In principle, we supply equip-
ment that is completely ready for opera-
tion and therefore ready for immediate
use. The assembly on site usually only in-
cludes the fastening by means of tensio-
Turbo-Jet 2.5 kW ning ropes and can usually be carried out
without problems by the personnel of the
sewage treatment plant.
Turbo-Jet 2.5 kW
floating version
Turbo-Jet 1.1 kW floating - parallel operation
14 LINN
The foaming of the cavities known from TURBO-JET in floating design is particu-
GFK floats is not necessary with our larly suitable for pools with fluctuating
high-quality floats! water levels, as the propeller immersion
TURBO-JET floating can be optimally depth of floating units is always constant
used for expansion or retrofitting - but and therefore always optimal, while per-
also for original equipment. The floating manently installed units have problems
unit only has to be placed on the waste here.
water, pulled to the desired position with The TURBO-JET floating aerator is also
the aid of stainless steel wire ropes and at- available in some special versions. For
Turbo-Jet 1.1kW - three aerators working
tached to the edge. example, we manufacture a variant with
in an oxidation pond
Then all you need is a connection to the two floats. This device is designed in such
The vacuum chamber is also made of grey power supply! It couldn‘t be simpler - or a way that it can be inserted into a pool
cast iron. The propeller has been specially faster or cheaper. Consider the cost sa- through a 60 cm man hole. Only the two special version - to use in closed tanks with manhole
developed by us for „dirty water“ applica- vings by omitting the installation (electri- floats (approx. 20 x 20 x 100 cm) still have
tions. The material used is a particularly city connection excluded). to be fixed in the tank! In tanks, this unit
can easily be locked in place with two ver- guide pipes. An additionally mounted
hard bronze alloy (tungsten carbide bron-
tical guide tubes (mounted on the pool stand protects the propeller from dama-
ze). This ensures long operating times.
floor and guided by the handles on the ge when the tank is completely emptied.
Wear and tear on the propeller is hardly
ADVANTAGES: floats). The aerator can float up and down Here, too, you can see how versatile our
noticeable even after several years of ope-
according to the water level on these system is!
ration.
l flexible and versatile
The propeller shape was developed in
l minimum energy consumption
such a way that no blockages or deposits
are possible. The free passage in the pro- l good oxygen input Motor rating kW 1.1 2.5 4.0
peller core ensures the addition of air. The l large circulation Power take-up W 1500 3000 5300
dimensioning ensures trouble-free conti- l l ow acquisition costs – Voltage V 400 400 400
nuous operation. fast amortisation Motor rpm 2900
The easiest way to use our ventilation sys- l low maintenance costs Active zone max. m 70 85 100
tem is in a floating version. We supply this Water delivery max. m3/h 300 500 750
l no installation
waste water aerator completely ready for Air delivery max. m3/h 30 60 85
l no laying of air ducts
operation. Aeration aggregate and float
Motor case grey cast
form a compact, firmly connected unit. l no construction work
Vacuum-casing grey cast
Practical carrying handles on the float l absolutely winterproof
Propeller bronze
allow two people to carry and insert the
l i mmediately usable Air supply stainless steel
unit without lifting gear or the like. The
l almost noiseless Float U-float 97 x 76 cm
devices are relatively light and easy to
handle. The float is made of PE plastic as a Dimension/height cm 85 85 90
hollow body and is very robust. Weight kg 45 62 70
Oxygen 0.9 1.8 3.18
enrichment kg/h
15 LINN
Waste water
Turbo-Jet stationary 1.1 kW
Turbo-Jet stationary
Turbo-Jet with hinged stainless fixing. The stainless steel support tube is Technical
steel fixing used simultaneously as an air intake tube.
Motor rating kW 1.1 2.5 4.0
TURBO-JET with hinged stainless steel
For use in closed basins or for attachment Power take-up W 1500 3000 5300
fixing should be mounted so that the pro-
to existing bridges of failed aeration rol-
Voltage V 400 400 400
peller works 40-50 cm below the waste
lers, we manufacture the aeration unit
Motor rpm 2900
water level. Thus the equipment achie-
with a stainless steel bracket. This version
ves the largest effectiveness and the best Active zone max. m 70 85 100
can also be used for retrofitting or original
equipment. Here again we deliver a com- oxygen input. Water delivery max. m3/h 300 500 750
pletely assembled unit ready for opera- With larger immersion depth of our ven- Air deliverymax. m3/h 30 60 85
tion. tilation aggregate the air intake track de- Motor case grey cast
The aeration unit can be aligned hori- creases. Vacuum-casing grey cast
zontally and vertically by means of the The exact execution of the mounting Propeller bronze
bracket. The unit can easily be removed plate can be adapted to the local condi- Air supply stainless steel
for possible maintenance work with the tions.
16 LINN
Simon Moore Water Services Rundumfisch AG ACUITEC S.L. Hrastinger GmbH Oy MG-Trading AB
Unit 2 Poundbury Est Ind. Estate Muschelbergweg 11 Poligono Urtaki No. 4 Statteggerstr. 60 FI-02920 Espoo
UK-DT1 2PG Dorchester/Dorset CH-8852 Altendorf E-20150 Aduna-Gipuzkoa A-8045 Graz Tel. [phone]
Tel.: [phone] Tel.: [phone] Tel.: [phone] Tel.: [phone] Internet: www.mg-trading.fi
E-Mail: [email protected] E-Mail: [email protected] E-Mail: [email protected] E-Mail:[email protected]
Internet: www.simon-moore.com Internet: www.rundumfisch.ch Internet: www.acuitec.es Internet: www.alles-fisch.at
Aqualor SARL Kedjeasens Fisk AB VISKWEKERIJ/PISCICULTURE AQUALITY OVRAIS Jacek Kierul
Parc d‘Activité Pl 111 Ommegangstraat 9, Oficerska 15
F-57930 Fenetrange S-69191 Karlskoga B-8720 Wakken(Dentergem) PL-10-215 Olsztyn
Tel.: [phone] Tel.: [phone] Tel. [phone] Tel.: [phone]
E-Mail: [email protected] E-Mail: [email protected] E-Mail: [email protected] E-Mail: [email protected]
Internet: www.aqualor.com Internet: www.kedjeasensfisk.se Internet: www.viskwekerij-aquality.be Internet: www.ovaris.com.pl
OOO Merke Scubla S.R.L. RAF ehf. Fish Tech AS
RUS-143980 Moscow region Strada di Oselin 108 Bæjarhraun 20 Verpetveien 20
Tel.: [phone] I-33047 Remanzacco (UD) IS-220 Hafnarfjordur N-1540 Vestby
E-Mail: [email protected] Tel.: [phone] Tel.: [phone] Tel.: [phone]
Internet: ww.merke.ru E-Mail: [email protected] E-Mail: [email protected] E-Mail: [email protected]
Internet: www.scubla.it Internet: www.rafehf.is Internet: www.fishtech.no
LINN Gerätebau GmbH
An der Sauerlandkaserne 1
D-57368 Lennestadt (Oedingen)
Telefon: [phone]
Fax: [phone]
E-Mail: [email protected] · www.linn.eu