Volume I: Static and Dynamic Analyses

875 Pages·2010·39.44 MB·English

Abaqus Example Problems Manual
AbaqusVersion6.9ExtendedFunctionalityID:
Printed on:

Abaqus
Example Problems Manual
Volume I
AbaqusVersion6.9ExtendedFunctionalityID:
Printed on:
Legal Notices
CAUTION:ThisdocumentationisintendedforqualifieduserswhowillexercisesoundengineeringjudgmentandexpertiseintheuseoftheAbaqus
Software.TheAbaqusSoftwareisinherentlycomplex,andtheexamplesandproceduresinthisdocumentationarenotintendedtobeexhaustiveortoapply
toanyparticularsituation.Usersarecautionedtosatisfythemselvesastotheaccuracyandresultsoftheiranalyses.
DassaultSystèmesanditssubsidiaries,includingDassaultSystèmesSimuliaCorp.,shallnotberesponsiblefortheaccuracyorusefulnessofanyanalysis
performedusingtheAbaqusSoftwareortheprocedures,examples,orexplanationsinthisdocumentation.DassaultSystèmesanditssubsidiariesshallnot
beresponsiblefortheconsequencesofanyerrorsoromissionsthatmayappearinthisdocumentation.
TheAbaqusSoftwareisavailableonlyunderlicensefromDassaultSystèmesoritssubsidiaryandmaybeusedorreproducedonlyinaccordancewiththe
termsofsuchlicense.Thisdocumentationissubjecttothetermsandconditionsofeitherthesoftwarelicenseagreementsignedbytheparties,or,absent
suchanagreement,thethencurrentsoftwarelicenseagreementtowhichthedocumentationrelates.
Thisdocumentationandthesoftwaredescribedinthisdocumentationaresubjecttochangewithoutpriornotice.
NopartofthisdocumentationmaybereproducedordistributedinanyformwithoutpriorwrittenpermissionofDassaultSystèmesoritssubsidiary.
TheAbaqusSoftwareisaproductofDassaultSystèmesSimuliaCorp.,Providence,RI,USA.
©DassaultSystèmes,2010
Abaqus,the3DSlogo,SIMULIA,CATIA,andUnifiedFEAaretrademarksorregisteredtrademarksofDassaultSystèmesoritssubsidiariesintheUnited
Statesand/orothercountries.
Other company, product, and service names may be trademarks or service marks of their respective owners. For additional information
concerning trademarks, copyrights, and licenses, see the Legal Notices in the Abaqus 6.10 Release Notes and the notices at:
http://www.simulia.com/products/products_legal.html.
AbaqusVersion6.9ExtendedFunctionalityID:
Printed on:
Locations
SIMULIAWorldwideHeadquarters RisingSunMills,166ValleyStreet,Providence,RI02909–2499,Tel:[phone],
Fax:[phone],[email protected]://www.simulia.com
SIMULIAEuropeanHeadquarters GaetanoMartinolaan95,P.O.Box1637,6201BPMaastricht,TheNetherlands,Tel:[phone],
Fax:[phone],[email protected]
TechnicalSupportCenters
UnitedStates Fremont,CA,Tel:[phone],[email protected]
WestLafayette,IN,Tel:[phone],[email protected]
Northville,MI,Tel:[phone],[email protected]
Woodbury,MN,Tel:[phone],[email protected]
Beachwood,OH,Tel:[phone],[email protected]
WestChester,OH,Tel:[phone],[email protected]
Warwick,RI,Tel:[phone],[email protected]
Lewisville,TX,Tel:[phone],[email protected]
Australia RichmondVIC,Tel:[phone],[email protected]
Austria Vienna,Tel:[phone],[email protected]
Benelux Huizen,TheNetherlands,Tel:[phone],[email protected]
Canada Toronto,ON,Tel:[phone],[email protected]
China Beijing,P.R.China,Tel:[phone],[email protected]
Shanghai,P.R.China,Tel:[phone],[email protected]
Czech&SlovakRepublics Synermas.r.o.,Psáry,Prague-West,Tel:[phone],[email protected]
Finland Vantaa,Tel:[phone],[email protected]
France VelizyVillacoublayCedex,Tel:[phone],[email protected]
Germany Aachen,Tel:[phone],[email protected]
Munich,Tel:[phone],[email protected]
Greece 3DimensionalDataSystems,Crete,Tel:[phone],[email protected]
India Chennai,TamilNadu,Tel:[phone],[email protected]
Israel ADCOM,Givataim,Tel:[phone],[email protected]
Italy LainateMI,Tel:[phone],[email protected]
Japan Tokyo,Tel:[phone],[email protected]
Osaka,Tel:[phone],[email protected]
Yokohama-shi,Kanagawa,Tel:[phone],[email protected]
Korea Mapo-Gu,Seoul,Tel:[phone],[email protected]
LatinAmerica PuertoMadero,BuenosAires,Tel:[phone],[email protected]
Malaysia WorleyParsonsAdvancedAnalysis,KualaLumpur,Tel:[phone],[email protected]
NewZealand MatrixAppliedComputingLtd.,Auckland,Tel:[phone],[email protected]
Poland BudSoftSp.zo.o.,Poznań,Tel:[phone],[email protected]
Russia,Belarus&Ukraine TESISLtd.,Moscow,Tel:[phone],[email protected]
Scandinavia Västerås,Sweden,Tel:[phone],[email protected]
Singapore WorleyParsonsAdvancedAnalysis,Singapore,Tel:[phone],[email protected]
SouthAfrica FiniteElementAnalysisServices(Pty)Ltd.,Parklands,Tel:[phone],[email protected]
Spain&Portugal PrincipiaIngenierosConsultores,S.A.,Madrid,Tel:[phone],[email protected]
Taiwan SimutechSolutionCorporation,Taipei,R.O.C.,Tel:[phone],[email protected]
Thailand WorleyParsonsAdvancedAnalysis,Singapore,Tel:[phone],[email protected]
Turkey A-ZtechLtd.,Istanbul,Tel:[phone],[email protected]
UnitedKingdom Warrington,Tel:[phone],[email protected]
Sevenoaks,Tel:[phone],[email protected]
Completecontactinformationisavailableathttp://www.simulia.com/locations/locations.html.
AbaqusVersion6.9ExtendedFunctionalityID:
Printed on:
Preface
ThissectionlistsvariousresourcesthatareavailableforhelpwithusingAbaqusUnifiedFEAsoftware.
Support
Both technical engineering support (for problems with creating a model or performing an analysis) and
systemssupport(forinstallation,licensing,andhardware-relatedproblems)forAbaqusareofferedthrough
anetworkoflocalsupportoffices. RegionalcontactinformationislistedinthefrontofeachAbaqusmanual
andisaccessiblefromtheLocationspageatwww.simulia.com.
SIMULIA Online Support System
TheSIMULIAOnlineSupportSystem(SOSS)providesaknowledgedatabaseofSIMULIAAnswers. The
SIMULIAAnswersaresolutionstoquestionsthatwehavehadtoanswerorguidelinesonhowtouseAbaqus,
SIMULIASLM,Isight,andotherSIMULIAproducts. Youcanalsosubmitnewrequestsforsupportinthe
SOSS. All support incidents are tracked in the SOSS. If you are contacting us by means outside the SOSS
todiscussanexistingsupportproblemandyouknowtheincidentnumber,pleasementionitsothatwecan
consultthedatabasetoseewhatthelatestactionhasbeen.
TousetheSOSS,youneedtoregisterwiththesystem. VisittheMySupportpageatwww.simulia.com
to register.
Many questions about Abaqus can also be answered by visiting the Products page and the Support
page atwww.simulia.com.
Anonymous ftp site
To facilitate data transfer with SIMULIA, an anonymous ftp account is available on the computer
ftp.simulia.com. Loginasuseranonymous,andtypeyoure-mailaddressasyourpassword. Contactsupport
before placingfiles onthe site.
Training
All offices and representatives offer regularly scheduled public training classes. We also provide training
seminars at customer sites. All training classes and seminars include workshops to provide as much
practical experience with Abaqus as possible. For a schedule and descriptions of available classes, see
www.simulia.comorcallyourlocalofficeorrepresentative.
Feedback
WewelcomeanysuggestionsforimprovementstoAbaqussoftware,thesupportprogram,ordocumentation.
We will ensure that any enhancement requests you make are considered for future releases. If you wish to
makeasuggestionabouttheserviceorproducts,refertowww.simulia.com. Complaintsshouldbeaddressed
bycontactingyourlocalofficeorthroughwww.simulia.com byvisitingtheQuality Assurancesectionof
the Support page.
AbaqusVersion6.9ExtendedFunctionalityID:
Printed on:
AbaqusVersion6.6ID:
Printed on:
CONTENTS
Contents
Volume I
1. Static Stress/DisplacementAnalyses
Staticand quasi-static stress analyses
Axisymmetricanalysisofboltedpipeflangeconnections 1.1.1
Elastic-plasticcollapseofathin-walledelbowunderin-planebendingandinternal
pressure 1.1.2
Parametricstudyofalinearelasticpipelineunderin-planebending 1.1.3
Indentationofanelastomericfoamspecimenwithahemisphericalpunch 1.1.4
Collapse ofaconcreteslab 1.1.5
Jointedrockslope stability 1.1.6
Notchedbeam undercyclicloading 1.1.7
Uniaxialratchettingundertensionandcompression 1.1.8
Hydrostaticfluidelements: modelinganairspring 1.1.9
Shell-to-solidsubmodelingandshell-to-solidcouplingofapipejoint 1.1.10
Stress-freeelementreactivation 1.1.11
Transientloadingofaviscoelasticbushing 1.1.12
Indentationofathickplate 1.1.13
Damageandfailureofalaminatedcompositeplate 1.1.14
Analysisofanautomotivebootseal 1.1.15
Pressurepenetrationanalysisofanairductkissseal 1.1.16
Self-contactinrubber/foamcomponents: jouncebumper 1.1.17
Self-contactinrubber/foamcomponents: rubbergasket 1.1.18
Submodelingofastackedsheetmetalassembly 1.1.19
Axisymmetricanalysisofathreadedconnection 1.1.20
Directcyclicanalysisofacylinderheadundercyclicthermal-mechanicalloadings 1.1.21
Erosionofmaterial(sandproduction)inanoilwellbore 1.1.22
Submodelstressanalysisofpressurevesselclosurehardware 1.1.23
Usingacompositelayuptomodelayachthull 1.1.24
Buckling and collapse analyses
Snap-throughbucklinganalysisofcirculararches 1.2.1
Laminatedcompositeshells: bucklingofacylindricalpanelwithacircularhole 1.2.2
Bucklingofacolumnwithspotwelds 1.2.3
Elastic-plasticK-framestructure 1.2.4
Unstablestaticproblem: reinforcedplateundercompressiveloads 1.2.5
Bucklingofanimperfection-sensitivecylindricalshell 1.2.6
v
Abaqus ID:exa-toc
Printed on: Wed February 24 -- 17:09:53 2010
CONTENTS
Forming analyses
Upsettingofacylindricalbillet: quasi-staticanalysiswithmesh-to-meshsolution
mapping(Abaqus/Standard)andadaptivemeshing(Abaqus/Explicit) 1.3.1
Superplasticformingofarectangularbox 1.3.2
Stretchingofathinsheetwithahemisphericalpunch 1.3.3
Deepdrawingofacylindricalcup 1.3.4
Extrusionofacylindricalmetalbarwithfrictionalheatgeneration 1.3.5
Rollingofthickplates 1.3.6
Axisymmetricformingofacircularcup 1.3.7
Cup/troughforming 1.3.8
Forgingwithsinusoidaldies 1.3.9
Forgingwithmultiplecomplexdies 1.3.10
Flatrolling: transientandsteady-state 1.3.11
Section rolling 1.3.12
Ring rolling 1.3.13
Axisymmetricextrusion: transientandsteady-state 1.3.14
Two-stepformingsimulation 1.3.15
Upsettingofacylindricalbillet: coupledtemperature-displacementandadiabatic
analysis 1.3.16
Unstablestaticproblem: thermalformingofametalsheet 1.3.17
InertiaweldingsimulationusingAbaqus/StandardandAbaqus/CAE 1.3.18
Fracture and damage
Aplatewithapart-throughcrack: elasticlinespringmodeling 1.4.1
Contourintegralsforaconicalcrackinalinearelasticinfinitehalfspace 1.4.2
Elastic-plasticlinespringmodelingofafinitelengthcylinderwithapart-throughaxial
flaw 1.4.3
Crackgrowthinathree-pointbendspecimen 1.4.4
Analysisofskin-stiffenerdebondingundertension 1.4.5
Failureofbluntnotchedfibermetallaminates 1.4.6
Debondingbehaviorofadoublecantileverbeam 1.4.7
Debondingbehaviorofasinglelegbendingspecimen 1.4.8
Postbucklingandgrowthofdelaminationsincompositepanels 1.4.9
Import analyses
Springbackoftwo-dimensionaldrawbending 1.5.1
Deepdrawingofasquarebox 1.5.2
2. DynamicStress/DisplacementAnalyses
Dynamic stress analyses
Nonlineardynamicanalysisofastructurewithlocalinelasticcollapse 2.1.1
DetroitEdisonpipewhipexperiment 2.1.2
vi
Abaqus ID:exa-toc
Printed on: Wed February 24 -- 17:09:53 2010
CONTENTS
Rigidprojectileimpactingerodingplate 2.1.3
Erodingprojectileimpactingerodingplate 2.1.4
Tennis racketand ball 2.1.5
Pressurizedfueltankwithvariableshellthickness 2.1.6
Modelingofanautomobilesuspension 2.1.7
Explosivepipe closure 2.1.8
Kneebolsterimpactwithgeneralcontact 2.1.9
Crimpformingwithgeneralcontact 2.1.10
Collapseofastackofblockswithgeneralcontact 2.1.11
Caskdropwithfoam impactlimiter 2.1.12
Obliqueimpactofacopperrod 2.1.13
Watersloshinginabaffledtank 2.1.14
Seismicanalysisofaconcretegravitydam 2.1.15
Progressivefailureanalysisofthin-wallaluminumextrusionunderquasi-staticand
dynamic loads 2.1.16
Impactanalysisofapawl-ratchetdevice 2.1.17
High-velocityimpactofaceramictarget 2.1.18
Mode-based dynamic analyses
Analysisofarotatingfanusingsubstructuresandcyclicsymmetry 2.2.1
LinearanalysisoftheIndianPointreactorfeedwaterline 2.2.2
Responsespectraofathree-dimensionalframebuilding 2.2.3
Brake squealanalysis 2.2.4
Dynamicanalysisofantennastructureutilizingresidualmodes 2.2.5
Steady-statedynamicanalysisofavehiclebody-in-whitemodel 2.2.6
Eulerian analyses
Rivetforming 2.3.1
Impactofawater-filledbottleusingEulerian-Lagrangiancontact 2.3.2
Co-simulation analyses
Closureofanair-filleddoorseal 2.4.1
Dynamicimpactofascooterwithabump 2.4.2
vii
Abaqus ID:exa-toc
Printed on: Wed February 24 -- 17:09:53 2010