User Manual CFB 9463 X CFB 6463 X EN ES PT

40 Pages·2015·1.06 MB·Portuguese

Hood
CFB 9463 X
User Manual
CFB 6463 X
EN ES PT
ENGLISH
1 Recommendations and Suggestions 4
2 General Information - Safety Warnings 7
3 Installation 9
4 Use - Maintenance 10
ESPAÑOL
1 Recomendaciones y sugerencias 13
2 Información general - Advertencias de
seguridad 16
3 Instalación 18
4 Uso - Mantenimiento 19
PORTUGUÊS
1 Conselhos e Sugestões 22
2 İnformações gerais - Precauções de
segurança 25
3 Instalação 27
4 Utilização - Manutenção 28
01M-8846143200-0615-01
01M-8846153200-0615-01
2 / 28 EN Hood / User Manual
Please read this user manual first!
Dear Customer,
Thank you for prefering a Beko product We hope that you get the best results from
your product which has been manufactured with high quality and state-of-the-art
technology Therefore, please read this entire user manual and all other accompanying
documents carefully before using the product and keep it as a reference for future
use If you handover the product to someone else, give the user manual as well Follow
all warnings and information in the user manual
Remember that this user manual is also applicable for several other models Differences
between models will be identified in the manual
Explanation of symbols
Throughout this user manual the following symbols are used:
C
Important information or useful
hints about usage
A
Warning for hazardous situations
with regard to life and property
B
Warning for electric shock
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations
Do not dispose of the packaging materials together with the domestic or other wastes Take them to the
packaging material collection points designated by the local authorities
This product was manufactured using the latest technology in environmentally friendly conditions
1 Recommendations and Suggestions
• Do not connect the extractor
The Instructions for Use
hood to exhaust ducts carrying
apply to several ver-
combustion fumes (boilers,
A sions of this appliance
fireplaces, etc )
Accordingly, you may find
descriptions of individual • If the extractor is used in
conjunction with non-electrical
features that do not apply
appliances (e g gas burning
to your specific appliance
appliances), a sufficient degree
1.1 Installation of aeration must be guaranteed
in the room in order to prevent
The manufacturer will not be held
the backflow of exhaust gas The
liable for any damages resulting
kitchen must have an opening
from incorrect or improper
communicating directly with the
installation
open air in order to guarantee the
• The minimum safety distance
entry of clean air When the cooker
between the cooker top and
hood is used in conjunction with
the extractor hood is 650 mm
appliances supplied with energy
(some models can be installed
other than electric, the negative
at a lower height, please refer
pressure in the room must not
to the paragraphs on working
exceed 0,04 mbar to prevent
dimensions and installation)
fumes being drawn back into the
• Check that the mains voltage room by the cooker hood
corresponds to that indicated on
• In the event of damage to the
the rating plate fixed to the inside
power cable, it must be replaced
of the hood
by the manufacturer or by the
• For Class I appliances, check technical service department, in
that the domestic power supply
order to prevent any risks
guarantees adequate earthing
• If the instructions for installation
• Connect the extractor to the for the gas hob specify a greater
exhaust flue through a pipe of
distance specified above, this
minimum diameter 120 mm The
has to be taken into account
route of the flue must be as short
Regulations concerning the
as possible
discharge of air have to be fulfilled
4 / 28 EN Hood / User Manual
1 Recommendations and Suggestions
• This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety
• Children should be supervised to
1.2 Use
ensure that they do not play with
• The extractor hood has been the appliance
designed exclusively for domestic
• “CAUTION: Accessible parts may
use to eliminate kitchen smells
become hot when used with
• Never use the hood for purposes cooking appliances ”
other than for which it has been
designed
• Never leave high naked flames
under the hood when it is in
operation
• Adjust the flame intensity to
direct it onto the bottom of the
pan only, making sure that it does
not engulf the sides
• Deep fat fryers must be
continuously monitored during
use: overheated oil can burst into
flames
• Do not flambè under the range
hood; risk of fire
Hood / User Manual 5 / 28 EN
1 Recommendations and Suggestions
1.3 Maintenance The symbol onthe productoron itspack-
aging indicatesthat this productmay not
• Switch off or unplug the appliance betreatedas household waste Insteadit
from the mains supply before shalbe handed over totheapplica-
blecolectionpointfortherecyclingof electrical an-
carrying out any maintenance
delectronic equipment By ensuring this product
work
isdisposedof correctly, you wilhelp prevent poten-
tial negative consequences for theenvironmen-
• Clean and/or replace the Filters
tandhumanhealth, whichcould otherwisebe
after the specified time period
caused by inappropriate waste handling of this
(Fire hazard) product For more detailed information about re-
cycling of this product, please contact your local
• Clean the hood using a damp cloth
city office, yourhousehold waste disposal servi-
and a neutral liquid detergent ceor the shop where you purchased the product
6 / 28 EN Hood / User Manual
2 General Information - Safety Warnings
General Informatıon 1. Safety Warnings
This canopy hood is designed to be 1 1 When used in the extraction
fixed to any rigid vertical surface, mode, the cooker hood ducting
over a gas or electric hotplate and must not be connected to a flue
can be used either in the extraction which is used for exhausting
mode (ducted to the outside) fumes from appliances supplied
or in the recirculation mode with energy other than electric,
(internal recycling) All cookers such as a central heating flue or
hood perform better when used water heating flue
in extraction mode During winter 1 2 Before connecting to the mains
time it may be convenient to use supply ensure that the mains
the hood in the recycling mode to voltage corresponds with the
avoid heat loss from the kitchen voltage on the rating plate
Before starting the installation, inside the hood
consideration should be given to
1 3 Connect the cooker hood to the
the difficulties that can be found
mains via a double poled switch
during installation The installation
which has 3mm clearance
work must be undertaken by a
between the contacts
qualified and competent person in
1 4 For cooker hoods featuring
conformity to the rules concerning
an earth cable, make sure the
the evacuation of contaminated air
electric plant of your house is
The manufacturer disclaims all
correctly earthed
liability for any damage or injury
1 5 Appliance in class II are provided
caused as a result of not following
with a double insulation;
the instructions for installation
therefore do not connect them
contained in the following text
through earthed plugs but
through a double poled plugs
1 6 When installed, the hood must
be positioned at least 65cm
above the hotplate
Hood / User Manual 7 / 28 EN
2 General Information - Safety Warnings
1 7 Never do flambé cooking under 1 12 If the supply cord is damaged,
this cooker hood it must be replaced by a special
1 8 Never leave frying pans cord or assembly available from
unattended during use as the manufacturer or its service
overheated fat and oil may agent
catch fire 1 13 This appliance is not intended
1 9 Before carrying out any kind for use by persons (including
of maintenance or cleaning, children) with reduced physical,
disconnect the hood from the sensory or mental capabilities,
mains supply or lack of experience and
knowledge, unless they have
1 10 If the room where the cooker
been given supervision or
hood is to be used contains a
instruction concerning use
fuel burning appliance such
of the appliance by a person
as a central heating boiler
responsible for their safety
then this must be of the room
sealed or balanced flue type If 1 14 Children should be supervised
other types of flue or appliance to ensure that they do not play
are fitted, ensure that there is with the appliance
an adequate supply of air into
the room When the cooker
hood is used in conjunction
with appliances supplied with
energy other than electric,
the negative pressure in the
room must not exceed 0,04
mbar to prevent fumes being
drawn back into the room by
the cooker hood
1 11 The appliance must be
positioned so that the plug is
accessible
8 / 28 EN Hood / User Manual
3 Installation
3. 1 Installatıon Instructıons 3.1.4 Choice of operating mode
Some installation systems require the opening • Evacuation mode
and removal of the metal grille panel To check that the hood is set up for evacuation,
open the grille panel and make sure that the
3.1.1 Instructions for opening
conversion lever or the change-over knob on
and removing the metal grille the centrifugal unit is in the DUCTING position
panel The charcoal filter is not required For ducting to
To open the grille panel, press inwardly on the two the outside, the hood is supplied with a rear and
slider catches at each side of the grille panel and top outlet A flange spigot of 100 mm diameter
the grille will pivot down (120 mm in certain models) is usually fitted on
the top outlet and a blanking plug on the rear
To remove the metal grille, pull forward on the
outlet If you choose to duct the hood from the
right hand side so that the hinge pin on the back
rear of the casing, you should invert the posi-
of the grille will be released from the slot in the
tion of the flange and of the blanking plug Pay
side of the casing
attention to the safety regulation 1 1
3.1.2 Wall cabinet fixing • Internal recirculation mode
• Predrilled wall cabinet: fix the hood onto the To check that the hood is set up for recycling,
wall cabinet base panel using the four screws open the grille panel and make sure that the
4 2 x 45 mm (supplied with the fixing kit) It is conversion lever or the change-over knob on
not necessary to open the metal grille the centrifugal unit is in the RECYCLING posi-
• No predrilled wall cabinet: tion The charcoal filter is to be fitted To fit the
charcoal filter, support the filter with one hand
- If the hood is provided with a paper fixing
and turn the thumb screw through the centre of
template, follow the instructions
the charcoal filter If the filter is of the interlock-
- If the hood is not provided with a paper fixing
ing type, turn the filter clockwise The hood can
template, position the hood on the wall
remain connected to the outside
cabinet base panel and pilot drill the 3 5 x 16
mm screws (not supplied with the fixing kit)
3.1.5 Electrical connection and
from the inside onto the wood
working test
3.1.3 Wall mounting • The safety measures 1 2, 1 3, 1 4 and 1 5 of para-
• Drill two Ø 8 mm holes on the wall using the graph 1 are to be strictly observed
paper template, insert two rawl plugs and two • Once the electrical connection has been com-
4 2 x 44,4 mm screws leaving 5 mm untight- pleted, check that the worktop illumination,
ened Open the metal grille panel, hook the motor and speeds work properly
hood on and fully tighten the screws
• If the hood is not provided with a paper fixing
template, drill two Ø 8 mm holes (see draw ),
insert the plugs and screws, proceeding as di-
rected under paragraph a
• For wall mounting using wallbrackets (optional),
follow the instructions of the fixing template
• Pay attention to the safety regulation of point
1 6
Hood / User Manual 9 / 28 EN
4 Use - Maintenance
4.1 Operation c Multi-layer metal filter It should be washed
once a month in hot water using mild detergent
• Controls are located on the right hand side of
or liquid soap It can be washed in a dishwasher
the front to operate worktop illumination and
It should not be bent and should be left to drain
select the most suitable working speed for your
dry
cooking To increase the area of extraction,
WARNING: An excess of grease in the filter not
the glass visor should be pulled open The top
only would affect the performance of the hood,
speed should be used when frying or cooking
but it is also a possible fire risk We strongly
foods with strong odours, while a lower speed
recommend therefore to clean and replace filters
can be used for normal cooking To obtain the
in accordance with the manufacturer instructions
best performance from your hood, turn it on
before you start cooking and leave it running
4.2.2 Cleaning Metal self-
for a few minutes after your cooking is over to
supporting Grease Filters
clear the air
• The filters are washable and must be cleaned at
• Pay attention to safety regulations 1 7 and 1 8
least every 2 months of operation, or more fre-
quently for particularly heavy usage
4.2 Maintenance and
• Remove the filters one at a time by pushing
Cleaning
them towards the back of the group and pulling
Regular maintenance and cleaning will ensure down at the same time
good performance and reliability, while extending • Wash the filters, taking care not to bend them
the working-life of the hood Special attention
Allow them to dry before refitting
should be reserved to the grease filter and to the
• When refitting the filters, make sure that the
charcoal filter (recycling mode)
handle is visible on the outside
4.2.1 Grease filter
4.2.3 Charcoal filter
This retains the solid grease particles and can be
supplied in different types lt is fitted onto the The charcoal filter is a chemical filter to be used
reverse side of the metal grille panel Maintenance only when the hood is in the recycling position
of the grease filter varies according to the used To replace the charcoal filter, open the grille and
type remove the thumb screw through the centre of
a Whatever type of filters used, the filter is easily the charcoal filter If the filter is of the interlocking
removed from the grille by pushing the metal type, turn the filter anticlockwise Replace by
wire clips to one side and removing reversing the operation For a good performance
b Thin synthetic filter (1 mm thick) It should replace the charcoal filter on average every three
not be washed and should be replaced every months
two months If the filter is provided with a
4.2.4 Worktop illumination
saturation indicator, replace when:
b 1- The violet colour of the dots, which are If a lamp fails to function at any time, open the
visible through the metal grille, is spread metal grille panel and check that the lamp is fully
over the whole surface of the filter screwed into the holder When changing the lamp,
b 2- The red colour of the stripes, which is not an identical replacement must be fitted to ensure
visible through the metal grille when the a safe working of the hood
filter is clean, becomes visible from the
outside of the metal grille
10 / 28 EN Hood / User Manual