TMS 2014: 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings

1152 Pages·2016·132.51 MB·English

by  The Minerals

2 0 1 4
143rd Annual Meeting & Exhibition
Annual Meeting
Supplemental Proceedings
TMS2014
143rd Annual ....t ing & Exhibition
2 0 1 4
143rd Annual Meeting & Exhibition
Annual Meeting
Supplemental Proceedings
About this volume
The TMS 2014 Annual Meeting Supplemental Proceedings is a collection of papers from the
TMS 2014 Annual Meeting & Exhibition, held February 16-20 in San Diego, California,
USA.
The papers in this volume represent 30 symposia from the meeting. This volume, along with
the other proceedings volumes published for the meeting, and archival journals, such as
Metallurgical and Materials Transactions and Journal of Electronic Materials, represents the
available written record of the 70 symposia held at the TMS 2014 Annual Meeting.
This proceedings volume contains both edited and unedited papers; the unedited papers have
not necessarily been reviewed by the symposium organizers and are presented "as is." The
opinions and statements expressed within the papers are those of the individual authors only,
and no confirmations or endorsements are intended or implied.
Editor
The Minerals, Metals & Materials Society
ISBN 978-3-319-48593-5 ISBN 978-3-319-48237-8 (eBook)
DOI 10.1007/978-3-319-48237-8
Chemistry and Materials Science: Professional
Copyright © 2016 by The Minerals, Metals & Materials Society
Published by Springer International Publishers, Switzerland, 2016
Reprint of the original edition published by John Wiley & Sons, Inc., 2014, 978-1-118-88972-5
This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or
part of the material is concerned, specifically the rights of translation, reprinting, reuse of
illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way,
and transmission or information storage and retrieval, electronic adaptation, computer software,
or by similar or dissimilar methodology now known or hereafter developed.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publication does not imply, even in the absence of a specific statement, that such names are
exempt from the relevant protective laws and regulations and therefore free for general use.
The publisher, the authors and the editors are safe to assume that the advice and information in
this book are believed to be true and accurate at the date of publication. Neither the publisher nor
the authors or the editors give a warranty, express or implied, with respect to the material
contained herein or for any errors or omissions that may have been made.
Printed on acid-free paper
This Springer imprint is published by Springer Nature
The registered company is Springer International Publishing AG
The registered company address is: Gewerbestrasse 11,6330 Cham, Switzerland
TABLE OF CONTENTS
TMS 2014 Supplemental Proceedings
2014 Functional Nanomaterials: Synthesis, Properties
and Applications
Characterization and Properties II & Carbon
N anomaterials I
Preparation and Ultraviolet-Visible Absorption Property of AAOlNi
Composite Membranes ......................................................................................... 3
J. Du. Z. Zhang, H. Hou, J. Peng, and Y. Yang
Magnetic Nanomaterials
Structure and Magnetocaloric Effect of Pr2Fe 17-xA Ix ............................................ 9
L. Bessais, R. Guetari, R. Bez, K. Zehani, N. Mliki, and C. Cizmas
High Magnetic Moment CoFe Nanoparticles ..................................................... 15
L. Bessais, K. Zehani, R. Bez, J. Moscovici, H. Lassri, E. Hlil,
and N. Mliki
Structural and Magnetic Properties ofNanocrystalline Pr2C07Cx and
Pr2C07Hy Alloys .................................................................................................. 23
L. Bessais, R. Fersi, and N. Mliki
Applications of Nanomaterials I
Ti02 Nanotubes Filled with NiFe204 Quantum Dots or Ni-Fe Nanoalloy:
Synthesis and Applications ................................................................................. 31
M. Mohassab-Ahmed, A. Moustafa, A. Farghali, H. Sohn,
and M. Khedr
Optical Magnetical Properties of FeCr204 Nanopigments with Spinel Type
Structure .............................................................................................................. 39
0. Restrepo, J. Montoya, and E. Chavarriaga
v
A Lifetime of Experience with Titanium Alloys: An
SMD Symposium in Honor of Jim Williams, Mike
Loretto and Rod Boyer
Williams Honorary Session II: Fatigue I
Fatigue Characteristics and Microstructures of Laser- and Non-Laser Welded
Low-Cost Ti-4.5AI-2.5Cr-1.2Fe-O.lC for Use in Next Generation Aircrafts .... .49
M Niinomi, M Nakai, J Hieda, K. Cho, Y Itsumi, S. Murakami,
H Oyama, and W Abe
Loretto Honorary Session II: Fatigue II & Advanced
Fabrication
In-Situ Synthesis and Characterization of TiBz and Ti-AI-B Composites .......... 57
M Ramachandran and R. Reddy
Analysis of Microstructural Inhomogeneities ofTi-Based Alloys Produced
via Laser-Based Combinatorial Synthesis .......................................................... 65
S. Li, S. Liu, N. Adkins, and M. Attallah
Boyer Honorary Session I: Environmental Effects
The Effect of Hydrogen on the Fracture Toughness ofTi-5Mo-5V-5AI-3Cr. .... 73
J Cotton, P. Hellenbrand, D. Bryan, T Bayha, M. Leder,
and I. Levin
Protection of Ti-Alloys Against High Temperature Environmental Attack
by a Two Step Process, Aluminization + Fluorination ....................................... 79
A. Donchev, M Galetz, M Schiltze, R. Yankov, and A. Kolitsch
Welding of Ti-6AI-4V in Air .............................................................................. 87
C. Schwandt, C. Allen, and D. Fray
VI
Boyer Honorary Session II: Structure/Property
Correlations
Grain Refinement in Ti-6AI-4V Alloy during Thermo-Mechanical Processing
and Investigation of Flow Properties .................................................................. 93
D. Sheed, B. Kashyap, and R. Singh
A Study on Microstructures and Hardening Behaviors of
Ti-12.1Mo-1Fe Alloy ....................................................................................... 101
C. Li, D. Lee, W. Ye, X Mi, and Y. Lee
Structure-Property Correlation in an Aircraft Sheet Metal Alloy
Ti-15V-3Cr-3AI-3Sn ........................................................................................ 105
S. Rajaraman, G. Manivasagam, V Kumar, and M Rao
General Abstracts
An Examination of the Thermally Related Factors Influencing the
MeltinglDissolution of Solids in Liquid Titanium ............................................ 1l3
J Ou, S. Cockcro{t, D. Maijer, L. Yao, C. Reilly, and A. Akhtar
On the Microstructure and Properties of the Ti-3AI-2.5V Alloy Obtained by
Powder Metallurgy ........................................................................................... 121
L. Bolzoni, E. Ruiz-Navas, and E. Gordo
Mechanical Properties of Biomedical ~-Type Titanium Alloy with
Rare-Earth Metal Oxide Particles Formed by Rare-Earth Metal Addition ....... 129
J Hieda, M Niinomi, M Nakai, and K. Cho
Effects of Rare Earth Er203 on Microstructure and Mechanical Properties of
Titanium Foams by Powder Metallurgy ........................................................... l37
X Jian, Q. Guibao, and L. Yilong
VII
Accelerated Materials Evaluation for Nuclear
Application Utilizing Test Reactors, Ion Beam
Facilities and Modeling
Poster Session
Effect of Low Dose Neutron Irradiation on Tensile Behavior ofHT-9 Steel
at Room Temperature ....................................................................................... 147
A. Sarkar, A. Alsabbagh, and K. Murty
Exploring Fission Enhanced Diffusion of Uranium in Uranium Dioxide
Using Classical Molecular Dynamics Simulations ........................................... 155
J. Wormald and A. Hawari
Surface Stabilities and Helium Trapping ofNano-Sized Oxide Phases in
Nano-Structured Ferritic Alloys: A First Principles Study ............................... 163
Y. Jiang, L. Yang, Y. Jin, and G. Odette
Advanced Characterization Techniques for
Quantifying and Modeling Deformation Mechanisms
Dislocations and Plasticity
Crystal Plasticity and Grain-Orientation-Dependent hkl-Lattice Strain in
Polycrystalline SUS316 .................................................................................... 173
L. Zheng, W. Yuan, and H. Badarinarayan
Advanced Materials in Dental and Orthopedic
Applications
Next Generation Biomaterials for Prosthodontics and
Orthopedics
Temporomandibular Joint Replacement: Past, Present and Future Material
Considerations .................................................................................................. 183
L. Mercuri
VIII
Fabrication of TiOz Nanotube Arrays Using 1,2-Propanediol Electrolyte for
Application in Biomedical Implants ................................................................. 191
D. Ganguly and Y. Zhao
Nitriding Behavior ofTi6AI4V Alloy in Gas Atmosphere ............................... 197
F. Siyahjani and E. Atar
Physical and Mechanical Properties of
Orthopedic/Dental Materials
Endurance of Low-Modulus P-Type Titanium Alloys for Spinal Fixation ....... 205
M. Niinomi, M. Nakai, J. Hieda, K. Cho, and K. Narita
Mechanical Performance of Different Nickel-Titanium Archwires Used
in Dentistry ....................................................................................................... 213
D. Fernandes, C. Elias, and R. Peres
Difference of Wear Behavior between Ti-29Nb-13Ta-4.6Zr Alloy and
Ti-6AI-4V ELI Alloy for Biomedical Applications .......................................... 217
M. Nakai, M. Niinomi, J. Hieda, K. Cho, and Y. Lee
Bone/Dental Implants with Enhanced Biomedical
Performance
Optimization of Anodization and Annealing Condition Enhances TiOz
Nanotubular Surface Hydrophilicity ................................................................. 221
A. Hamlekhan, A. Butt, S. Patel, D. Royhman, C. Takoudis,
C. Sukotjo, M. Mathew, and T Shokuhfar
Dental and Orthopedic Composites
The Optimum Preparation of WC-Co Composite Powders by Sol-Gel and
Hydrogen Reduction ......................................................................................... 229
X Wang, L. Huang, Z. Zhang, J. Peng, and H. Hou
IX