The Role of 3D Printing for the Growth and Progress of Medical Healthcare Technology

216 Pages·2022·9.192 MB·English

by  Dinesh Bhatia

The Role of 3D
Printing for the
Growth and Progress
of Medical Healthcare
Technology

The Role of 3D
Printing for the
Growth and Progress
of Medical Healthcare
Technology
Edited by
Dinesh Bhatia
The Role of 3D Printing for the Growth and Progress of Medical
Healthcare Technology

Edited by Dinesh Bhatia

This book first published 2022

Cambridge Scholars Publishing

Lady Stephenson Library, Newcastle upon Tyne, NE6 2PA, UK

British Library Cataloguing in Publication Data
A catalogue record for this book is available from the British Library

Copyright © 2022 by Dinesh Bhatia and contributors

All rights for this book reserved. No part of this book may be reproduced,
stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without
the prior permission of the copyright owner.

ISBN (10): 1-5275-8236-1
ISBN (13): 978-1-5275-8236-1
My sincere gratitude to my dear parents for their unconditional
love, support and blessings in all my endeavours
Mr. Ashok and Mrs. Kanchan Bhatia

TABLE OF CONTENTS

Contributors ............................................................................................... ix

Foreword ................................................................................................... xi

Preface ...................................................................................................... xii

Chapter One ................................................................................................ 1
Introduction to 3D Printing
Dr. Neelamshobha Nirala

Chapter Two ............................................................................................. 32
The Role of 3D Printing in the Growth and Progress of Medical
Healthcare Technology
Dr. Dinesh Bhatia, Hirak Ranjan Das

Chapter Three ........................................................................................... 51
3D Bioprinted Human Skin
Dr. S. Arun Karthick, Dr. S. Bagyaraj, and Dr. B. Devi

Chapter Four ............................................................................................. 69
Heart 3D Printing
Helen Mary M C, Dr. Dilbag Singh and Prof. K. K. Deepak

Chapter Five ............................................................................................. 82
Bioprinted Tissues and Organs
Dr. Kirti Agrawal, Dr. S. Varadharajan and Dr. S.V. Kirthanashri

Chapter Six ............................................................................................. 100
Assistive Device for Osteochondroma at Talus
Diksha Zutshi, Dr. Reema Shyamsunder Shukla

Chapter Seven ......................................................................................... 114
3D Printing in Healthcare: A Pragmatic Approach Transforming
the Field of Medical Science
Swati Sikdar
viii Table of Contents

Chapter Eight .......................................................................................... 134
Assistive Foot Device for Hemiplegic Patients
Shreyas Patil, Mihir Kulkarni, Shubham Hajare, Tanvi Parkhe,
Rutwik Palaskar, Diksha Zutshi, Dr. Reema Shyamsunder Shukla,
Dr Sameer Desai

Chapter Nine ........................................................................................... 145
3D Biosensors in Medical Diagnostics Current Status and Future Trends
Satarupa Biswas and Dr. Moumita Mukherjee

Chapter Ten ............................................................................................ 169
3D Printed Sensors for Medical Healthcare Applications
Dr. Gauri M. Shukla

Chapter Eleven ....................................................................................... 190
Challenges of 3D Bioprinting
Dr A.J. Vanisree
CONTRIBUTORS

Ms. Kirti Agrawal, Amity School of Engineering & Technology, Amity
University, Noida, UP, India

Dr. S. Bagyaraj, SSN Institute, Chennai, India

Dr. Dinesh Bhatia, North Eastern Hill University, Shillong, Meghalaya,
India

Dr. Satarupa Biswas, Adamas University, Kolkata, India

Dr. Hirak Ranjan Das, Royal Global University, Guwahati Assam, India

Prof. K. K. Deepak, AIIMS, India

Dr Sameer Desai, SBSR, MIT-ADT University, Pune, India

Dr. B. Devi, SSN Institute, Chennai, India

Shubham Hajare, SBSR, MIT-ADT University, Pune, India

Dr. S. Arun Karthick, SSN Institute, Chennai, India

Dr. S.V. Kirthanashri, Amity School of Engineering & Technology, Amity
University, Noida, UP, India

Mihir Kulkarni, SBSR, MIT-ADT University, Pune, India

Dr. Helen Mary M C, Rajiv Gandhi Institute of Technology, Bangalore,
Karnataka, India

Dr. Moumita Mukherjee, Adamas University, Kolkata, India

Dr. Neelamshobha Nirala, National Institute of Technology, Ranchi, India

Rutwik Palaskar, SBSR, MIT-ADT University, Pune, India