Terminal blocks Insulation displacement ADO System

132 Pages·2008·9.28 MB·English

Main Catalog Terminal blocks
Insulation displacement
ADO System®

Summary
Presentation ............................................................................................................2 - 3
Selection guide ........................................................................................................4 - 5
ADO - Screw clamp connection ..........................................................................6 - 48
Feed through terminal blocks .................................................................................................................6 – 2
Feed through terminal blocks - Double-deck .......................................................................................3 - 6
Terminal blocks for neutral circuits ..............................................................................................................7
Ground terminal blocks not electrically connected to the mounting rail .....................................................8
Ground terminal blocks electrically connected to the mounting rail ...........................................................9
Heavy duty switch terminal blocks with blade ......................................................................................20 - 22
Heavy duty switch terminal blocks with plug........................................................................................23 - 25
Heavy duty switch terminal blocks with fuse holder plug for automotive Mini Fuse ...................................26
Fuse holder terminal blocks for 5x20 mm (.97x.787 in.) and 5x25 mm (.97x.984 in.) fuses ............27 - 30
Neutral switch blocks ............................................................................................................................3 - 32
Terminal blocks with safety connection .......................................................................................................33
Miniblocks ....................................................................................................................................................34
Feed through miniblocks on DIN 3 rail ..................................................................................................35 - 36
Ground miniblocks not electrically connected to the DIN 3 mounting rail ..................................................37
Ground miniblocks electrically connected to the DIN 3 mounting rail .........................................................38
Feed through miniblocks on DIN 2 rail ..................................................................................................39 - 40
Ground miniblocks not electrically connected to the DIN 2 mounting rail ..................................................4
Ground miniblocks electrically connected to the DIN 2 mounting rail .........................................................42
Feed through miniblocks base mounted with flanges ..........................................................................43 - 44
Ground miniblocks not electrically connected to the mounting plate .........................................................45
Feed through miniblocks base mounted with snap in mounting foot...................................................46 - 47
Ground miniblocks not electrically connected to the mounting plate .........................................................48
ADO - ADO connection .......................................................................................49 - 93
Feed through terminal blocks ...............................................................................................................49 - 56
Feed through terminal blocks - Double-deck .......................................................................................57 - 59
Terminal blocks for sensors / actuators ................................................................................................60 - 62
Terminal blocks for neutral circuits ..............................................................................................................63
Terminal blocks for neutral conductors ........................................................................................................64
Ground terminal blocks not electrically connected to the mounting rail .....................................................65
Ground terminal blocks electrically connected to the mounting rail ...........................................................66
Heavy duty switch terminal blocks with blade ......................................................................................67 - 69
Heavy duty switch terminal blocks with plug........................................................................................70 - 72
Heavy duty switch terminal blocks with fuse holder plug for automotive Mini Fuse ...................................73
Fuse holder terminal blocks for 5x20 mm (.97x.787 in.) and 5x25 mm (.97x.984 in.) fuses ............74 - 75
Neutral switch block .............................................................................................................................76 - 77
Component holder terminal blocks ..............................................................................................................78
Miniblocks ....................................................................................................................................................79
Feed through miniblocks on DIN 3 rail ..................................................................................................80 - 8
Ground miniblocks not electrically connected to the DIN 3 mounting rail ..................................................82
Ground miniblocks electrically connected to the DIN 3 mounting rail .........................................................83
Feed through miniblocks on DIN 2 rail ..................................................................................................84 - 85
Ground miniblocks not electrically connected to the DIN 2 mounting rail ..................................................86
Ground miniblocks electrically connected to the DIN 2 mounting rail .........................................................87
Feed through miniblocks base mounted with flanges ..........................................................................88 - 89
Ground miniblocks not electrically connected to the mounting plate .........................................................90
Feed through miniblocks base mounted with snap in mounting foot...................................................9 - 92
Ground miniblocks not electrically connected to the mounting plate .........................................................93
ADO - Pluggable terminal blocks ......................................................................94 - 99
Terminal blocks .....................................................................................................................................94 - 96
Female plugs .........................................................................................................................................97 - 98
Male plugs ...........................................................................................................................................99 - 00
ADO - ADO terminal blocks for railway applications ...................................102 - 107
ADO - Pluggable terminal blocks for railway applications .........................108 - 115
Terminal blocks .................................................................................................................................08 - 
Female plugs .....................................................................................................................................2 - 3
Male plugs .........................................................................................................................................4 - 5
Tools, test connectors, accessories ..............................................................116 - 118
Marking ............................................................................................................119 - 121
Alphanumeric ...........................................................................................................123
Low Voltage Products & Systems 
ABB Inc. • 888-385-22 • www.abb-control.com LV009 [SXU60009C0202] - June 2007
Color Type Part number
Terminal blocks D 2,5/5.ADO.1

Insulation
Grey D 2,5/5 .ADO.1 0199 562.23
Spacing 5 mm +0,05 .198"

displacement
45 1.77"
ADO - Screw clamp

DIN3

20" 1.91"
ADO side Screw side 2.
5
0.22 - 1 mm² 0.2 - 2,5 mm² 56 48,
24 - 18 AWG 22 - 12 AWG
center of rail 23 .91"
D2,5/5.ADO with partition 0199 562.23
Accessories Type Part number
1 End section grey F EDAD th. 3 mm 099 336.20
blue F EDAD th. 3 mm 099 338.02
yellow FEDAD th. 3 mm 099 339.03
 2 Test socket AL2 DIA. 2 mm 063 046.24
3 Test device DCB b lue 005 028.2
4 Test plug FC2 DIA. 2 mm 0007 865.26
3 2 5 Assembled jumper bar BJM5 (2 ) 24 A 2 p oles 076 273.0
(without IP20 protection) BJM5 (2 ) 24 A 3 p oles 076 274.02
BJM5 (2 ) 24 A 4 p oles 076 275.03
4 BJM5 (2 ) 24 A 5 p oles 076 276.04
BJM5 (2 ) 24 A 0 p oles 076 277.05
6 Assembled jumper bar BJMI5 (2 ) 24 A 2 p oles 076 278.6
(with IP20 protection) BJMI5 (2 ) 24 A 3 p oles 076 279.7
5 BJMI5 (2 ) 24 A 4 p oles 076 280.05
BJMI5 (2 ) 24 A 5 p oles 076 28.22
6 BJMI5 (2 ) 24 A 0 p oles 076 282.23
7 Jumper bar not assembled BJS5 (2 ) 24 A 20 p oles 077 652.06
Post + screw + washer EV5 (2 ) 068 629.6
8 Screwless jumper bar BJE5.2 (2 ) 20 A 2 p oles 099 227.23
7 orange IP20 BJE5.3 (2 ) 20 A 3 p oles 099 228.04
BJE5.4 (2 ) 20 A 4 p oles 099 298.03
End stop th. 9 mm BADL V 0 0399 903.02 BJE5.5 (2 ) 20 A 5 p oles 099 299.04
End stop th. 0 mm BAM2 V 2 0206 351.16 BJE5.6 (2 ) 20 A 6 p oles 0299 86.03
End stop th. 0 mm BAM2 V0 V 0 0399 967.01 BJE5.7 (2 ) 20 A 7 p oles 0299 862.04
Rail 35 x 7,5 x  PR3.Z2 0174 300.17 BJE5.8 (2 ) 20 A 8 p oles 0299 863.05
Rail 35 x 5 x 2,3 PR4 0168 500.12 BJE5.9 (2 ) 20 A 9 p oles 0299 864.06
Rail 35 x 5 x ,5 PR5 0168 700.22 0 BJE5.0 (2 ) 20 A 0 p oles 099 443.24
9 Jumper bar BJB 099 466.23
Other end stops, rails and accessories : see section on accessories.
10 Screwless jumper bar BJADO5.2 3,5 A 2 p oles 0205 955.03
 to be inserted into ADO jaw B JADO5.3 3,5 A 3 p oles 0205 956.04
Characteristics
orange IP20 BJADO5.4 3,5 A 4 p oles 0205 957.05
Wire size BJADO5.5 3,5 A 5 p oles 0205 958.6
BJADO5.0 3,5 A 0 p oles 0205 963.03
IEC UL/CSA 2 BJADO5.20 3,5 A 20 p oles 0205 973.05
NFC DIN
11 Comb-type jumper bar PC5 30 A 2 p oles 03 542.0
Screw Solid wire 0,2-4 mm² 22-2 AWG 3 P C5 30 A  0 p oles 03 544.2
Stranded wire 0,22-2,5mm² 22-2 AWG
Isolating cover E IP 03 550.24
Solid wire 0,2- mm² 24-8 AWG
ADO 12 Shield connector C BM5 th. 0 ,5 mm 078 745.4
Stranded wire 0,22- mm² 24-8 AWG
CBM8 th. 0 ,8 mm 078 746.5
Voltage 4 13 Hand tool kit OUMAD 079 466.06
Rated 000 V 600 V 6 14 Semi-automatic tool OUPAD 078 944.04
Pulse 8 kV 15 Pneumatic tool kit OUTAD 0205 70.
Pollution degree 3 16 Replacement head kit OUTA 0205 284.03
Current 17 Extraction tool kit EXAD2 0205 72.00
Rated 3,5 A 7 A 18 Test connector CEADO.5 0399 345.
CEADOE 0399 34.5
Wire size
Rated  mm² 8 AWG 5 7
Wire stripping Recommended Recommended
length (screw) (screw) torque (screw) Protection
9,5 mm 3,5 mm 0,4-0,6 Nm IP 20
.37" .37" 3.5-5.3 lb.in NEMA 
Notes
Standard block 5 mm spacing. For multiple wires con- 8
nection, the 2 wires need to be of the same gauge and
nature (solid or stranded). Terminal block body material
is UL 94 V0.
R
R See section on markers
marking method 5 RC55  RC50 2 RTM7
(2) Use of these accessories requires the user to cut out the partition.
Low Voltage Products & Systems 7
ABB Inc. • 888-385-22 • www.abb-control.com LV009 [SXU60009C0202] - June 2007
Presentation
ADO System® is a composition of two ADO System® : high speed and cost savings
complementary pieces :
80 % time saving....
The IDC Connection :
The tool :

• Cut the wire
• Insert
• Actuate the tool
The ADO System® takes the electrical
connection into a new era :
• Simple multi-function tool for reliable and
long-term connections without effort.
•- Connection : 3 seconds away
• High productivity benefits by eliminating
unnecessary actions
• Reliable, fast, vibration- and corrosion-proof ADO System® is the only wiring concept where
connection is independent from operator
Elimination of conductor preparation risks
•- The tool is locked on the block during the
No need of ferrule
entire connection process
By using ADO System®, the following risks no longer •- The tool guarantees a simple, good
exist: and secure connection
• Stripping operation overlooked •- The tool ensures reproduction of connection
quality, connection after connection, without
• All strands not connected
operator fatigue
• Stripping length too long or too short
• Tightening torque not respected
• Insulation not respected
• Worn or poorly adapted crimping tools
• Ferrules poorly crimped
2 Low Voltage Products & Systems
LV009 [SXU60009C0202] - June 2007 ABB Inc. • 888-385-22 • www.abb-control.com
Presentation
ADO System® is the best solution for applications ADO System®: high speed and cost savings
with vibration, compared to other connection
With the strong ADO System® consecutive improvement and
technologies
advantages in hand, we can take the next steps to bring to our
customers the level of sustainable
ADO System® offers exceptional vibration and shock withstand
performance required.
performance with its double gripping of
non-stripped conductors. Provide added value to your customers, helping them to reduce
costs, to improve efficiency and to restore some processes.
Results :
• No loosening of screws
• No contact bounce
•- No cut cable strands
Unstripped insulator Wire insulation is pinched by
absorbs vibrations terminal block insulation
Contact forces are per- Copper alloy jaw pinches
manently balanced the wire at two points
ADO System® :
ADO System® is the best solution for applications
with corrosion, compared to other connection
technologies
The XXIst century connection
Low galvanic couple of
Eliminates unnecessary actions
copper alloy jaw
Sealed contact point
Time reduction
End of wire (non isolated)
is far from contact points
100% secured connection
Vibration-proof specialist
Anti-corrosion specialist
Low Voltage Products & Systems 3
ABB Inc. • 888-385-22 • www.abb-control.com LV009 [SXU60009C0202] - June 2007
Selection guide
FEED THROUGH NEUTRAL CIRCUIT GROUND DOUBLE
DECK
P a g e 6 t o 1 2 P a g e 1 7 P a g e 1 8 - 1 9 P a g e 1 3 t o 1 6
SCREW CLAMP
- ADO

IDC
TERMINAL BLOCKS Rated wire size : Rated wire size :
0.2 to 0 mm² (22 to 8 AWG) 0.2 to 0 mm² (22 to 8 AWG)
Spacing : Spacing :
5 to 8 mm (.98" to .35") 5 to 8 mm (.98" to .35")
Current : Current :
3.5 to 32 A 3.5 to 32 A Rated wire size : Rated wire size :
0.2 to 0 mm² (22 to 8 AWG) 0.2 to 0 mm² (22 to 0 AWG)
Spacing : Spacing :
5 to 8 mm (.98" to .35") 6 to 8 mm (.238" to .35")
Current : Current :
20 to 480 A/s 7.5 to 24 A (80 A/ s. for ground block)
P a g e 4 9 t o 5 6 P a g e 6 3 - 6 4 P a g e 6 5 - 6 6 P a g e 5 7 - 5 9
ADO - ADO
IDC
TERMINAL BLOCKS
P a g e 1 0 2 - 1 1 5 P a g e 1 0 3
Rated wire size : Rated wire size : Rated wire size :
0.2 to 4 mm² (24 to 2 AWG) 0.2 to 4 mm² (24 to 2 AWG) 0.28 to .5 mm² (22 to 6 AWG)
Spacing : Spacing : Spacing :
Rated wire size : 5 to 8 mm (.98" to .35") 5 to 8 mm (.98" to .35") 6 mm (.238")
0.2 to 4.32 mm² (24 to 2 AWG)
Spacing : Current : Current : Current :
5 to 8 mm (.98" to .35") 3.5 to 32 A 20 to 480 A/s 7.5 to 8 A
Current : Grey body material :
3.5 to 32 A UL 94 V0
Grey body material :
UL 94 V0 Beige body material :
UL 94 V0 - I2F2
Beige body material : for railway applications
UL 94 V0 - I2F2
for railway applications
ADO - PLU GGABLE BUfoeLr i gr9ae4i l wbVoa0dy - y aI 2mpFpa2lti cearitaiol :ns P a g e 1 0 6 t o 1 1 3 BUfoeLr i gr9ae4i l wbVoa0dy - y aI 2mpFpa2lticearitaiol :ns
IDC Rated wire size : Rated wire size :
0.6 to 4.32 mm² 0.93 to 2.6 mm²
TERMINAL BLOCKS
Spacing : Spacing :
PLU+G S 7C.6u6 r2troe m n2tm4 : A(.300") P a g e 9 4 t o 1 0 0 7C2.4u6 r2Are mntm : (.300")
Grey body material : Grey body material :
UL 94 V0 UL 94 V0
4 Low Voltage Products & Systems
LV009 [SXU60009C0202] - June 2007 ABB Inc. • 888-385-22 • www.abb-control.com
Selection guide
SENSOR/ HEAVY DUTY FUSE MINIBLOCKS SAFETY
ACTUATOR SWITCH HOLDER
P a g e 2 0 t o 2 5 P a g e 2 6 t o 3 2 P a g e 3 3
P a g e 3 4 t o 4 8
Rated wire size :
0.5 to 0 mm² (20 to 0 AWG)
Spacing :
8 mm (.35")
Current :
24 A
Rated wire size :
0.2 to 6 mm² (22 to 0 AWG)
Spacing : Rated wire size :
5 to 8 mm (.98" to .35") 0.2 to 4 mm² (22 to 0 AWG)
Current : Spacing : Rated wire size :
0 to 5 A 5 to 8 mm (.98 to .35") 0.2 to 4 mm² (24 to 0 AWG)
Spacing :
Current :
5 to 8 mm (.98" to .35")
3 to 0 A
Current :
3.5 to 32 A (up to 300 A/ s. for ground
blocks)
P a g e 6 0 t o 6 2 P a g e 6 7 t o 7 2
P a g e 7 9 t o 9 3
P a g e 7 3
R0.a2t etod w mirem s²ize : P a g e 1 0 4 t o 7 7
Spacing :
5 mm (.98")
Current : Rated wire size :
3.5 A 0.2 to 2,5 mm² (24 to 4 AWG)
Spacing : Rated wire size :
5 to 8 mm (.98" to .35") 0.2 to 2.5 mm² (24 to 4 AWG)
Current : Rated wire size :
0 to 5 A Spacing : 0.2 to 4 mm² (24 to 2 AWG)
5 to 8 mm (.98" to .35")
Grey body material : Spacing :
UL 94 V0 Current : 5 to 8 mm (.98" to .35")
Beige body material : 6.3 to 0 A Current :
UL 94 V0 - I2F2 3.5 to 32 A
for railway applications
P a g e 1 1 6 TOOLS CONNTEESCTT ORS AMoCunCtingE raSilsSORPIEa gSeE n1d 1sto8psSbahrield terminals for collector MAPRaKgIeN G1 1 9 t o 1 2 1
Pneumatic tool
PR3.Z2
PR30 BADL
Vertical marking Horizontal marking
PR3.G2
Extraction tool BADH
PR4
P a g e 1 1 7 PR5
Semi-automatic tool Simplified tool PR.Z2 BAMH BAM Marking table
Low Voltage Products & Systems 5
ABB Inc. • 888-385-22 • www.abb-control.com LV009 [SXU60009C0202] - June 2007
Terminal blocks D 2,5/5.ADO Color Type Part number
Standard block
Insulation
Grey D 2,5/5.ADO 0199 554.23
Spacing 5 mm +0,05 .198"
displacement Orange D 2,5/5.ADO 0199 555.24
45 1.77" Blue D 2,5/5.N.ADO 0199 556.25
ADO - Screw clamp Black D 2,5/5.ADO 0199 557.26
Red D 2,5/5.ADO 0199 558.07
DIN3 Ivory D 2,5/5.ADO 0199 559.00
20" 1.91" Yellow D 2,5/5.ADO 0199 560.05
2. Green D 2,5/5.ADO 0199 561.22
5
ADO side Screw side 56 48,
0,22 - 1 mm² 0,2 - 2,5 mm²
24 - 18 AWG 22 - 12 AWG
center of rail 23 .91"
S tandard 5 mmblock 0199 554.23
Accessories Type Part number
1 End section grey F EDAD th. 3 mm 099 336.20
blue F EDAD th. 3 mm 099 338.02
2 yellow F EDAD th. 3 mm 099 339.03
 2 Circuit separator grey S CAD5 099 55.20
3 Test socket A L2 ( ) DIA. 2 mm 063 046.24
4 Test device D CB blue 005 028.2
4 3 5 Test plug F C2 DIA. 2 mm 0007 865.26
6 Assembled jumper bar B JM5 ( ) 24 A 2 poles 076 273.0
(without IP20 protection) B JM5 ( ) 24 A 3 poles 076 274.02
B JM5 ( ) 24 A 4 poles 076 275.03
5
B JM5 ( ) 24 A 5 poles 076 276.04
B JM5 ( ) 24 A 0 poles 076 277.05
7 Assembled jumper bar B JMI5 ( ) 24 A 2 poles 076 278.6
(with IP20 protection) B JMI5 ( ) 24 A 3 poles 076 279.7
B JMI5 ( ) 24 A 4 poles 076 280.05
B JMI5 ( ) 24 A 5 poles 076 28.22
7 6 B JMI5 ( ) 24 A 0 poles 076 282.23
8 Jumper bar not assembled B JS5 ( ) 24 A 20 poles 077 652.06
8 Post + screw + washer E V5 068 629.6
B JE5.2 20 A 2 poles 099 227.23
B JE5.3 20 A 3 poles 099 228.04
B JE5.4 20 A 4 poles 099 298.03
End stop th. 9 mm BADL V 0 0399 903.02 B JE5.5 20 A 5 poles 099 299.04
End stop th. 0 mm BAM2 V 2 0206 351.16 B JE5.6 20 A 6 poles 0299 86.03
End stop th. 0 mm BAM2 V0 V 0 0399 967.01 B JE5.7 20 A 7 poles 0299 862.04
Rail 35 x 7,5 x  PR3.Z2 0174 300.17 B JE5.8 20 A 8 poles 0299 863.05
Rail 35 x 5 x 2,3 PR4 0168 500.12 B JE5.9 20 A 9 poles 0299 864.06
Rail 35 x 5 x ,5 PR5 0168 700.22  B JE5.0 20 A 0 poles 099 443.24
Other end stops, rails and accessories : see section on accessories. 2 10 Jumper bar B JB 099 466.23
11 Screwless jumper bar B JADO5.2 3,5 A 2 poles 0205 955.03
Characteristics
to be inserted into ADO jaw B JADO5.3 3,5 A 3 poles 0205 956.04
Wire size orange IP20 B JADO5.4 3,5 A 4 poles 0205 957.05
3 B JADO5.5 3,5 A 5 poles 0205 958.6
IEC UL/CSA
B JADO5.0 3,5 A 0 poles 0205 963.03
NFC DIN
B JADO5.20 3,5 A 20 poles 0205 973.05
Solid wire 0,2-4 mm² 22-2 AWG
Screw 4 12 Comb-type jumper label P C5 30 A 2 poles 03 542.0
Stranded wire 0,22-2,5 mm² 22-2 AWG
P C5 30 A 0 poles 03 544.2
Solid wire 0,2- mm² 24-8 AWG
ADO Isolating cover E IP 03 550.24
Stranded wire 0,22- mm² 24-8 AWG
5 13 Shield connector C BM5 th. 0 ,5 mm 078 745.4
Voltage C BM8 th. 0 ,8 mm 078 746.5
Rated 000 V 600 V 7 14 Hand tool kit O UMAD 079 466.06
Pulse 8 kV 15 Semi-automatic tool O UPAD 078 944.04
Pollution degree 3 16 Pneumatic tool kit O UTAD 0205 70.
Current 17 Replacement head kit O UTA 0205 284.03
Rated 3,5 A 7 A 6 18 Extraction tool kit E XAD2 0205 72.00
19 Test connector C EADO.5 0399 345.
Wire size 8
C EADOE 0399 34.5
Rated  mm² 8 AWG

Wire stripping Recommended Recommended
length (screw) (screw) torque (screw) Protection
9,5 mm 3,5 mm 0,4-0,6 Nm IP 20
.37" .37" 3.5-5.3 lb.in NEMA 
Notes
9
Standard block 5 mm spacing. For multiple wires con-
nections, the 2 wires need to be of the same gauge and
nature (solid or stranded). Terminal block body material
is UL 94 V0.

R
R See section on markers
marking method 5 RC 55  RC 50 2 RTM7
() SC and 500 V (IEC) rated voltage are required with these accessories.
6 Low Voltage Products & Systems
LV009 [SXU60009C0202] - June 2007 ABB Inc. • 888-385-22 • www.abb-control.com
Terminal blocks D 4/6... .ADO Color Type Part number
Standard block
Insulation
Orange D 4/6.ADO 0199 035.16
Displacement Spacing 6 mm +0,05 .238" Blue D 4/6.N.ADO 0199 036.17
Black D 4/6.ADO 0199 071.22
ADO - Screw clamp Red D 4/6.ADO 0199 069.00
Ivory D 4/6.ADO 0199 070.05
DIN3 Yellow D 4/6.ADO 0199 039.22
Green D 4/6.ADO 0199 040.07
AADDOO ssiiddee SSccrreeww ssiiddee
00,,3344 -- 11,,55 mmmm²² 00,,22 -- 44 mmmm²²
2222 -- 1166 AAWWGG 2222 -- 1100 AAWWGG
G rey 0199 034.15
Accessories Type Part numbers
1 End section grey FEDAD th. 3 mm 099 336.20
blue FEDAD th. 3 mm 099 338.02
 2
yellow FEDAD th. 3 mm 099 339.03
2 Separator grey S CAD 096 896.00
3 Test socket AL2 ( ) DIA. 2 mm 063 043.2
4 3 AL3 ( ) DIA. 3 mm 063 26.00
4 Test device DCJ y ellow 073 059.03
5 Test plug FC2 DIA. 2 mm 0007 865.26
5 FC4 DIA. 4 mm 067 860.0
6 Assembled jumper bar BJM6 32 A 2 p oles 068 56.25
(without IP20 protection) BJM6 32 A 3 p oles 068 57.26
6 BJM6 32 A 4 p oles 068 58.07
BJM6 32 A 5 p oles 068 59.00
BJM6 32 A 0 p oles 068 973.07
7 7 Assembled jumper bar BJMI6 32 A 2 p oles 076 663.00
(with IP20 protection) BJMI6 32 A 3 p oles 076 664.0
8 BJMI6 32 A 4 p oles 076 665.02
BJMI6 32 A 5 p oles 076 666.03
BJMI6 32 A 0 p oles 076 667.04
8 Jumper bar not assembled BJS6 32 A 20 p oles 074 784.20
Post + screw + washer EV6 068 604.6
9 Screwless jumper bar BJE6.2 32 A 2 p oles 0299 694.04
orange IP20 BJE6.3 32 A 3 p oles 0299 695.05
 BJE6.4 32 A 4 p oles 0299 696.06
End stop th. 9 mm BADL V 0 0399 903.02 BJE6.5 32 A 5 p oles 0299 697.07
End stop th. 0 mm BAM2 V 2 0206 351.16 2 BJE6.6 32 A 6 p oles 0299 698.0
End stop th. 0 mm BAM2 V0 V 0 0399 967.01 BJE6.7 32 A 7 p oles 0299 699.
Rail 35 x 7,5 x  PR3.Z2 0174 300.17 3 BJE6.8 32 A 8 p oles 0299 700.26
Rail 35 x 5 x 2,3 PR4 0168 500.12 BJE6.9 32 A 9 p oles 0299 70.3
Rail 35 x 5 x ,5 PR5 0168 700.22 BJE6.0 32 A 0 p oles 0299 702.4
Other end stops, rails and accessories : see section on accessories. 10 Jumper bar BJB 099 466.23
4 11 Screwless jumper bar BJADO6.2 7, 5 A 2 p oles 0205 974.06
Characteristics
to be inserted into ADO jaw BJADO6.3 7, 5 A 3 p oles 0205 975.07
Wire size 5 orange IP20 BJADO6.4 7, 5 A 4 p oles 0205 976.00
BJADO6.5 7, 5 A 5 p oles 0205 977.0
IEC
UL CSA BJADO6.0 7, 5 A 0 p oles 0205 982.27
NFC DIN
6 BJADO6.20 7, 5 A 20 p oles 0205 992.2
Solid wire 0,2-4 mm² 22-0 AWG 22-0 AWG
Screw 12 Pivoting jumper bar B JP6 35 A 074 43.4
Stranded wire 0,22-4 mm² 22-0 AWG 22-0 AWG 7
13 Jumper bar for alternated jumping BJA6 32 A 0 p oles 06 54.2
Solid wire 0,34-,5 mm² 22-6 AWG 22-6 AWG
ADO 14 Universal jumper bar BJDP (2 ) 5 0 A s p a .6 < - > s p a . 6 079 623.03
Stranded wire 0,34-,5 mm² 22-6 AWG 22-6 AWG
Voltage 8 BBJJDDPP34 ((22 )) 75 00 AA ss pp aa .. 66 << -- >> ss pp a a. .8 2or 0 007794 67285..0255
Rated 000 V 600 V 600 V 15 Connector plate EL6 35 A 073 627.2
Pulse 8 kV 16 Comb type jumper bar PC6 35 A 2 p oles 03 546.4
Pollution degree 3 9 PC6 35 A 3 p oles 06 536.05
Current PC6 35 A 4 p oles 06 537.06
Rated 7,5 A 8 A 8 A PC6 35 A 0 p oles 03 548.26
20 Insulating tip EIP 03 550.24
Wire size
17 Shield connector CBM5 th. 0,5 mm 078 745.4
Rated ,5 mm² 0/6 AWG 0/6 AWG
2 CBM8 th. 0,8 mm 078 746.5
Wire stripping Recommended Recommended 18 Protection label EP6 4 b locks 063 427.7
lenght (screw) screwdriver torque (screw) Protection 23 Screw for protection label VSP6 063 433.5
9,5 mm 4 mm 0,5-0,8 Nm IP 20 19 IDC jumper AD2,5 24 A 04 205.20
.37" .6" 4.4-7. lb.in NEMA  20 Hand tool kit OUMAD 079 466.06
Notes 22 21 Semi-automatic tool OUPAD 078 944.04
22 Pneumatic tool kit OUTAD 0205 70.
Standard block 6 mm. For multiple wire connections, the 23 Replacement head kit OUTA 0205 284.03
two wires need to be of the same gauge and nature (solid 24 Extraction tool kit EXAD2 0205 72.00
or stranded). Terminal block body material is UL 94 V0. 24 25 Test connector CEADO.6 0399 346.2
CEADOE 0399 34.5

25 R
R See section on markers
marking method 5 RC65  RC60 2 RTM7
() A circuit separator SCAD and 500 V (IEC) rated voltage are required with these
accessories.
(2) See column on right page : "Various applications".
8 Low Voltage Products & Systems
LV009 [SXU60009C0202] - June 2007 ABB Inc. • 888-385-22 • www.abb-control.com