SIMULIA Abaqus-Isight-Fe-Safe-Tosca-Simpack

76 Pages·2017·0.75 MB·English

Course Catalog
SIMULIA Abaqus Isight Fe-safe Tosca Simpack
08 June 2017
3DS Learning Solutions | Course Catalog
© 2007-2017 Dassault Systèmes - All rights reserved
No part of this publication may be reproduced, translated, stored in retrieval system or transmitted, in
any form or by any means, including electronic, mechanical, photocopying, recording or otherwise,
without the express prior written permission of DASSAULT SYSTEMES. This courseware may only
be used with explicit DASSAULT SYSTEMES agreement.
3DS Learning Solutions | Course Catalog
SIMULIA
Abaqus 1
Abaqus/CAE: Geometry Import and Meshing (CAGIM) 2
Abaqus/Explicit: Advanced Topics (ADXP) 3
Abaqus for Offshore Analysis (OFFSH) 4
Adaptive Remeshing in Abaqus/Standard (ADAP) 5
Advanced Abaqus Scripting (SCRPT) 6
Analysis of Composite Materials with Abaqus (MAT) 8
Analysis of Geotechnical Problems with Abaqus (GEOT) 9
Automotive NVH with Abaqus (NVH) 11
Buckling, Postbuckling and Collapse Analysis (BUCK) 12
Composites Modeler for Abaqus/CAE (CMA) 13
Co-simulation with Abaqus and Dymola (DYM) 15
Crashworthiness Analysis with Abaqus (CRASH) 16
CZone for Abaqus (CZA) 17
Electromagnetic Analysis with Abaqus (EMAG) 18
Element Selection in Abaqus (ELEMC) 19
Fitness-for-Service Analysis with Abaqus (FFSA) 20
Flexible Multibody Systems with Abaqus (FLEX) 22
FSI Simulation Using Abaqus and 3rd Party Codes (FSI) 23
GUI Customization with Abaqus (GUIC) 24
Heat Transfer and Thermal-Stress Analysis with Abaqus (HEAT) 25
Introduction to Abaqus (ABI) 26
Introduction to Abaqus/CAE (ICAE) 27
Introduction to Abaqus/Standard and Abaqus/Explicit (IABA) 28
Introduction to Abaqus Scripting (ISRPT) 29
Linear Dynamics with Abaqus (LNDYN) 30
Metal Forming with Abaqus (METF) 31
Metal Inelasticity in Abaqus (METAL) 32
Modeling Contact and Resolving Convergence Issues with Abaqus (MCRC) 33
Modeling Contact with Abaqus/Standard (CONT) 35
Modeling Extreme Deformation and Fluid Flow with Abaqus (FLOW) 36
Modeling Fracture and Failure with Abaqus (FRAC) 38
3DS Learning Solutions | Course Catalog
Modeling Rubber and Viscoelasticity with Abaqus (MRUB) 39
Modeling Stents Using Abaqus (STENT) 40
Obtaining a Convergenced Solution with Abaqus (CONV) 41
Structural-Acoustic Analysis Using Abaqus (ACOU) 42
Substructures and Submodeling with Abaqus (SUPSUB) 43
Tire Analysis with Abaqus: Advanced Topics (TIRE2) 44
Tire Analysis with Abaqus: Fundamentals (TIRE) 45
Writing User Subroutines with Abaqus (SUBR) 46
fe-safe 48
Automating Analysis in fe-safe (AAFS) 49
Fatigue of Welds in fe-safe® (FWFS) 50
Introduction to fe-safe (IFES) 52
Isight 53
Introduction to Isight (ISGT) 54
Isight Component Development (ISCD) 56
Simpack 57
Flexible Bodies in Simpack (SMPKFB) 58
Introduction to Simpack (SMPKBA) 59
Simpack Automotive (SMPKAU) 60
Simpack Contact Mechanics (SMPKCM) 61
Simpack Drivetrain (SMPKDT) 63
Simpack Rail (SMPKRA) 64
Simpack Scripting (SMPKSC) 65
Simpack User Routines (SMPKUR) 66
Tosca Fluid 67
Introduction to Tosca Fluid (TOSCFL) 68
Tosca Structure 69
Introduction to Tosca Structure (TOSCST) 70
Tosca Structure nonlinear: Optimization for Structures with Nonlinearity (TOSCNL) 71
3DS Learning Solutions | Course Catalog
SIMULIA
Abaqus
1 / 71
3DS Learning Solutions | Course Catalog
Abaqus/CAE: Geometry Import and Meshing (CAGIM)
Course Code SIM-en-CAGIM-A-V30R2017
Available Release 2017
Duration 16 hours
Course Material English
Level Advanced
Audience Simulation Analysts
Description This course provides an in-depth look at several
advanced Abaqus/CAE capabilities: CAD geometry
import and repair, meshing and partitioning of
complicated geometry.
Objectives Upon completion of this course you will be able to:
- Import, edit, and repair CAD geometry.
- Import and edit orphan meshes.
- Use virtual topology to ease the meshing of
complicated geometry.
- Partition geometry to enable different meshing
techniques.
Prerequisites None
Available Online Yes
2 / 71
3DS Learning Solutions | Course Catalog
Abaqus/Explicit: Advanced Topics (ADXP)
Course Code SIM-en-ADXP-A-V30R2017
Available Release 2017
Duration 24 hours
Course Material English
Level Advanced
Audience Simulation Analysts
Description The course emphasizes practical skills and techniques
that are needed for analyses with Abaqus/Explicit.
Objectives Upon completion of this course you will be able to:
- Use the explicit dynamics method effectively,
including the application of general contact, mass
scaling, and adaptive remeshing
- Use Abaqus/Explicit and Abaqus/Standard together
to solve difficult problems, including results transfer
and co-simulation
- Model high-strain-rate deformation and failure
- Filter output
Prerequisites This course is recommended for engineers with
experience using Abaqus
Available Online Yes
3 / 71
3DS Learning Solutions | Course Catalog
Abaqus for Offshore Analysis (OFFSH)
Course Code SIM-en-OFFSH-A-V30R2017
Available Release 2017
Duration 16 hours
Course Material English
Level Advanced
Audience This course is recommended for engineers with
experience using Abaqus who work in the Oil and Gas
industry.
Description This course was designed by SIMULIA UK in support
of their offshore customers to provide them a more in-
depth, industry-specific training. The workshops in this
course are completely new and were developed from
customer applications.
Objectives The topics covered in this course include:
- Review nonlinear material behavior (metal plasticity
and hyperelasticity)
- Capabilities of Abaqus element types in general
- Specific element discussions include drag chain,
pipe, PSI and ITT elements
- Pipe-soil interaction, including lateral buckling of a
pipe line on a seabed
- Abaqus/Aqua capabilities in Abaqus/Standard to
model wave, buoyancy, current & wind loading
- Coupled Eulerian-Lagrangian (CEL) approach in
Abaqus/Explicit
Prerequisites None
Available Online Yes
4 / 71
3DS Learning Solutions | Course Catalog
Adaptive Remeshing in Abaqus/Standard (ADAP)
Course Code SIM-en-ADAP-A-V30R2017
Available Release 2017
Duration 8 hours
Course Material English
Level Advanced
Audience Simulation Analysts
Description This course provides an in-depth coverage of the
Abaqus features which address adaptive remeshing for
solution accuracy.
Objectives Upon completion of this course you will be able to:
- Set up an adaptive remeshing process
- Specify adaptive remeshing rules
- Interpret error indicators and their associated output
variables
Prerequisites This course is recommended for engineers with
experience using Abaqus
Available Online Yes
5 / 71
3DS Learning Solutions | Course Catalog
Advanced Abaqus Scripting (SCRPT)
Course Code SIM-en-SCRPT-A-V30R2017
Available Release 2017
Duration 16 hours
Course Material English
Level Advanced
Audience Simulation Analysts
Description This seminar is offered as a follow-up to the
Introduction to Abaqus Scripting course. It is a deeper
dive into both Python and the Abaqus Scripting
Interface and gives users more hands on exposure
with practically oriented workshops of moderate
complexity. This course also provides pointers for more
specialized and advanced topics.
Objectives Upon completion of this course you will be able to:
- Help students to develop a high level understanding
of the Abaqus scripting capabilities and gain some
proficiency.
- Organize and present the deeper technical details
of Python and the Abaqus Scripting Interface.
- Expose the strengths and weaknesses of Abaqus
scripting.
- Encourage the student to use scripting in new
ways.
- This advanced seminar will take a deeper dive into:
- The Abaqus Scripting Interface (ASI)
- The core functionality of the Python language and
libraries
Prerequisites Experience scripting with Python and Abaqus is
recommended.
6 / 71