Side entry Top entry All welded Metal to metal Cryogenic API 6A API 6D Sub Sea Modular

44 Pages·2007·4.84 MB·English

Side entry
Top entry
All welded
Metal to metal
Cryogenic
API6A
API6D
Sub Sea
Modular
C-BV5
2
INTRODUCTION
Over the past 30 years OMB have
developed into a major international
valve supplier, supporting the oil, gas,
power generation & chemical
industries. We have gained a
reputation for quality and reliability
and OMB’s innovation is supported by
a rigorous Research & Development
Programme.
OMB are always looking to develop
existing products and introduce new
lines, which will enable the company
to strengthen its market share and take
OMBinto the next millennium.
OMB work in close liaison with their
customers, helping in identifyng and
solving problems and this is supported
by a network of valve distribution and
marketing service offices. Recently
OMB acquired the Lamperti range of
Ball Valve Products, which will further
expand upon our existing range of ball
A family tradition:
valves. Due to this expansion
50 years and counting
programme we have opened a new
Roberto Brevi
Simone Brevi Ball Valve Division “Fluicon”, solely
e Fabio Brevi specialising in the manufacture and
development of the ball valves range.
The valves will be fully in accordance
www.ombvalves.com with API6D and BS 5351.The valves
are firesafe certified and manufactured
in soft or metal seated designs. They
can also be supplied Top Entry or Split
Introduction 3 API 6A 26
Body welded construction. They can be
Quality - Testing 4 Product Range 28 manufactured to work at low
temperature conditions and high
Trunnion - Programme/Features 6 Floating - Programme/ Features 30
temperatures.
With the total commitment of OMB,
Side entry - BSE 8 Floating 32
this new division can only be successful
Forged and cast top entry - BTE 14 Cryogenic 36 and we look forward to working with
all our existing customers and new
Full welded - WSE 20 Modular Valves 39 ones in the future, guaranteeing the
OMB technical excellence and
reliability.
OMB div Fluicon. Headquarter in Bergamo, Italy
3
OMB's certified quality assurance
Q
UALITY
system is the result of more than 25
years of experience as forged steel
valve manufacturers.
Each phase in the engineering, design,
order administration manufacturing,
procurement and assembly, as well as
servicing the valves in the field, is ruled
by comprehensive procedures.
OMB is certified to ISO 9001 since
July 1990 and the strict application of
very high quality assurance procedures
won OMB the approval by the most
important end-users around the world.
All the necessary quality assurance
measures are put into practice and
then documented from the time the
order is received until the delivery time.
OMB staff has extensive experience in
operating under strict quality
standards, thus guaranteeing high level
of service throughout all the company
activities.
All OMB Ball Valves
can be recognized
by the tag reporting
all the relevant valve
information.
4
Severe testing and inspection of all
T
ESTING
product components ensure the high
quality and reliability of OMB-
FLUICON ball valves.
Coordinate measurement equipment
certifies the precision of valve
components to required finish
tolerances.
Valve performance are then tested
against the OMB-FLUICON testing
procedures. Every valve is pressure
tested to assure the integrity of its
construction before being released to
the customer.
Special testing procedures can be
studied and applied to meet specific
customer’s request.
Starting from material and components
evaluation, OMB's Quality Control
division operates a state-of-the-art
H T laboratory where valves can be tested
YDRAULIC EST
to satisfy every customer’s requisition.
The laboratory is equipped to operate
the following tests; just to mention few:
- Cryogenic Test
- Gas test
- Leak test
- Bend test
- DPI and MPI
- Fire safe test
-P.A.M.I. and other material related
tests. All tests are documented and
certified according to internal
procedures based on international
requirements or customer’s requisitions.
G T
AS EST
F S T
IRE AFE EST
Fire Safe Certification
5
Trunnion Construction
Class Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500
Diameter RB - FB RB - FB RB - FB RB - FB RB - FB RB - FB
1/2"
3/4"
1"
11/2"
2"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
22"
24"
26"
28"
30"
32"
34"
36"
40"
42"
48"
56"- 60"
Other dimension on request
P
ROGRAMME
Applicable Standards
BS 5351
Steel Ball Valves
BS 6755
Testing of Valves
API 6D LICENCE N° 6D-0286
Specification for pipeline valves
API 6A LICENCE N° 6A-0778
Specification wellhead valves
API Spec. Q1
Quality
API 607
Valve Insp. Test
API 598
Steel Ball Valves
ISO 9001
Specification for Q.A.
ASME/ANSI B16.10
Face-to-face and End-to-end dimensions on
ferrous valves
ASME/ANSI B16.5 - B16.47
Pipe flanges and flanged fittings
ASME/ANSI B16.34
Valves-flanged and Buttweld end
MSS SP-25
Standard Marking system for valves
NACE std MRO175
Sulfide stress cracking resistant metallic
materials for oilfield equipment
6
OMB-FLUICON
side entry type Ball Valves
OMB-FLUICON trunnion mounted Double Block & Bleed: The body
type ball valves are manufactured to cavity is isolated when the ball is in
API6D specification and tested to API either fully closed or fully opened
598/API 607. The construction is position, the medium entrapped in it
side entry three pieces full and can easily be bled to avoid
reduced port. The valves are lever overpressure.
operated and where recommended or Seat Ring Sealing: as line pressure
when required are gear operated or increases, our seat design enacts a
actuated. The following are some of piston effect forcing the resilient seat
the major design features: insert against the ball.In absence of
Structure: Solid entirely forged the pressure or with low pressures, the
construction. seats are forced against the ball by
Fire-safe: All size and pressure the set of preloaded springs. (see
classes have been succesfully fire-safe sketch)
tested according to the relevant API Pressure reliieving: If excessive
and BS specifications.Test certificaties pressure builds up in the body cavity
are available on request. exceeding the safe working pressure,
Antistatic: Electrical continuity of all the seat authomatically relieves.
valve components, prevent statics buil-up.
F
EATURES
Trunnion Construction
Without prior notice OMB reserves the right to make
modifications or changes to its production.
7
S E B V - BSE
IDE NTRY ALL ALVES
8
FFOORRGGEEDD BSE - DIMENSIONS & WEIGHTS CL 150
SSTTEEEELL
JASME CLASS 150 FULL BORE ASME CLASS 150 REDUCED BORE
SIDE ENTRY SIDE ENTRY
SIZE SIZE
IN/MM D RF WE E B C WEIGHT IN/MM A D RF WE E B C WEIGHT
LBS/KG LBS/KG
2 2.00 7.00 8.50 5.90 5.51 3.54 44 2 x 11/2 2.00 1.50 7.00 8.50 5.90 4.00 3.00 33
50 51 178 216 150 140 90 20 50 x 40 51 38 178 216 150 101 76 15
3 3.00 8.00 11.13 7.48 7.48 4.13 91 3 x 2 3.00 2.00 11.13 3.03 7.48 5.51 3.54 66
80 76 203 283 190 190 105 41 80 x 50 76 51 203 283 190 140 90 30
4 4.00 9.00 12.00 9.00 9.72 5.55 144 4 x 3 4.00 3.00 12.00 4.02 9.00 7.48 4.13 133
100 102 229 305 230 247 141 65 100 x 80 102 76 229 305 230 190 105 60
6 6.00 15.50 18.00 12.20 11.61 6.88 338 6 x 4 6.00 4.00 15.50 18.00 12.20 11.02 6.53 262
150 152 394 457 310 295 175 152 With lever 150 x 100 152 102 394 457 310 280 166 118
8 8.00 18.00 20.50 15.35 12.99 8.26 489 With gear 8 x 6 8.00 6.00 18.00 20.50 15.35 11.61 6.88 366
200 203 457 521 390 330 210 220 With lever 200 x 150 203 152 457 521 395 295 175 165
10 10.00 21.00 22.00 18.11 15.74 9.84 922 With gear 10 x 8 10.00 8.00 21.00 22.00 15.98 12.99 8.26 588
250 254 533 559 460 400 250 415 250 x 200 254 203 533 559 406 330 210 265
12 12.00 24.00 25.00 21.45 18.11 12.20 1289 12 x 10 12.00 10.00 24.00 25.00 19.02 15.74 9.84 1000
300 305 610 635 545 460 310 580 300 x 250 305 254 610 635 483 400 250 450
14 14.00 27.00 30.00 24.00 18.89 13.38 1802 14 x 10 14.00 10.00 27.00 30.00 21.06 18.11 12.30 1155
350 356 686 762 610 480 340 811 350 x 250 356 254 686 762 535 460 310 520
16 16.00 30.00 33.00 26.37 21.25 15.15 2644 14 x 12 14.00 12.00 27.00 30.00 21.06 18.11 12.20 1577
400 406 762 838 670 540 385 1150 350 x 300 356 305 686 762 535 460 310 710
18 18.00 34.00 36.00 24.80 22.83 16.85 2888 16 x 12 16.00 12.00 30.00 33.00 23.43 18.89 13.38 1755
450 457 864 914 630 580 428 1300 400 x 300 406 305 762 838 595 480 340 790
20 20.00 36.00 39.00 33.43 23.00 21.45 4000 16 x 14 16.00 14.00 30.00 33.00 23.43 18.89 13.38 2000
500 508 914 991 849 584 545 1800 400 x 350 406 356 762 838 595 480 340 900
22 22.00 40.00 43.00 36.81 24.00 23.00 5333 18 x 16 18.00 16.00 34.00 36.00 24.80 21.25 15.15 2777
550 559 991 1092 935 610 584 2400 450 x 400 457 406 864 914 630 540 385 1250
24 24.00 42.00 45.00 39.57 24.10 25.87 6888 20 x 16 20.00 16.00 36.00 39.00 27.56 22.83 16.85 1555
600 610 1067 1143 1005 612 655 3100 500 x 400 508 406 914 991 700 580 428 1150
26 26.00 45.00 49.00 41.73 24.69 22.20 20 x 18 20.00 18.00 36.00 39.00 27.56 22.83 16.85 2777
(1)
650 660 1143 1245 1060 627 564 500 x 450 508 457 914 991 700 580 428 1250
28 28.00 49.00 53.00 44.88 25.35 25.91 24 x 20 24.00 20.00 42.00 45.00 32.28 23.00 18.00 6400
(1)
700 711 1244 1347 1140 644 658 600 x 500 610 508 1067 1143 820 584 457 2990
30 30.00 51.00 55.00 47.24 27.20 27.70 28 x 24 28.00 24.00 49.00 53.00 37.40 24.50 19.49
(1) (1)
750 762 1295 1397 1200 691 705 700 x 600 711 610 1244 1347 950 622 495
32 32.00 54.00 60.00 51.18 29.21 29.37 30 x 24 30.00 24.00 51.00 55.00 38.78 25.15 20.28
(1) (1)
800 813 1371 1524 1300 742 746 750 x 600 762 610 1295 1397 985 638 515
34 34.00 58.00 64.00 53.94 29.88 30.51 36 x 30 36.00 30.00 60.00 68.00 46.06 27.17 27.56
(1) (1)
850 864 1473 1626 1370 759 775 900 x 750 914 762 1524 1728 1170 690 700
36 36.00 60.00 68.00 56.30 31.97 31.77 (1) •) Other dimension on request.
900 914 1524 1728 1430 812 807
40 40.00 69.00 77.00 63.00 35.43 35.35
(1)
1000 1016 1753 1956 1600 900 898
42 42.00 72.00 82.00 64.96 37.13 37.00
(1)
1050 1067 1855 2083 1656 943 940
48 48.00 80.00 94.00 75.59 43.19 41.73
(1)
1200 1219 2134 2388 1920 1097 1060
56 53.54 98.00 98.00 89.00 52.00 50.00
(1)
1400 1360 2490 2490 2260 13.21 1270
- Flanges in accordance with ASME B16.5 - Butt welding ends according to ASME B16.25
- Shaded bore sizes (D) according to API 6D - Shaded end-to-end dimensions to API 6D
Weight figures are relevant to flanged end valves. (1) Please consult the factory. Note. For dimensions and weights in larger sizes consult the factory.
Dimensions B, C, D, E and weights are subject to change without notice.
9
BSE - DIMENSIONS & WEIGHTS CL 300 FORGED
STEEL
ASME CLASS 300 FULL BORE ASME CLASS 300 REDUCED BORE
SIDE ENTRY SIDE ENTRY
SIZE SIZE
IN/MM D RF WE E B C WEIGHT IN/MM A D RF WE E B C WEIGHT
LBS/KG LBS/KG
2 2.00 8.50 8.50 6.50 7.87 4.72 91 2 x 11/2 2.00 1.50 8.50 8.50 6.50 6.88 3.14 44
50 51 216 216 165 200 120 41 50 x 40 51 38 216 216 165 175 80 20
3 3.00 11.10 11.10 8.50 9.44 5.11 133 3 x 2 3.00 2.00 11.10 11.10 8.50 7.87 4.72 122
80 76 283 283 218 240 130 60 80 x 50 76 51 283 283 218 200 120 55
4 4.00 12.00 12.00 10.00 9.72 5.55 222 4 x 3 4.00 3.00 12.00 12.00 10.00 9.44 5.11 153
100 102 305 305 254 247 141 100 100 x 80 102 76 305 305 254 240 130 69
6 6.00 15.90 18.00 12.20 11.61 6.88 395 6 x 4 6.00 4.00 15.90 18.00 12.20 11.02 5.90 260
150 152 403 457 310 295 175 178 With lever 150 x 100 152 102 403 457 310 280 150 117
8 8.00 19.80 20.50 15.40 12.99 8.26 422 With gear 8 x 6 8.00 6.00 19.80 20.50 15.40 11.61 6.88 433
200 203 502 521 390 330 210 190 With lever 200 x 150 203 152 502 521 390 295 175 195
10 10.00 22.40 22.00 18.50 16.53 10.62 1066 With gear 10 x 8 10.00 8.00 22.40 22.00 17.50 12.99 8.26 722
250 254 568 559 470 420 270 480 250 x 200 254 203 568 559 445 330 210 325
12 12.00 25.50 25.00 21.30 18.30 12.79 1444 12 x 10 12.00 10.00 25.50 25.00 20.50 16.53 10.62 1222
300 305 648 635 545 465 325 650 300 x 250 305 254 648 635 520 420 270 550
14 14.00 30.00 30.00 24.80 21.45 16.92 1777 14 x 10 14.00 10.00 30.00 30.00 23.00 18.30 12.79 1444
350 356 762 762 630 545 430 800 350 x 250 356 254 762 762 585 465 325 650
16 16.00 33.00 33.00 27.20 23.62 18.50 2977 14 x 12 14.00 12.00 30.00 30.00 23.00 18.30 12.79 1555
400 406 838 838 690 600 470 1340 350 x 250 356 305 762 762 585 465 325 700
18 18.00 36.00 36.00 30.30 23.10 20.07 3511 16 x 12 16.00 12.00 33.00 33.00 25.60 21.45 16.92 2177
450 457 914 914 770 586 510 1580 400 x 300 406 305 838 838 650 545 430 980
20 20.00 39.00 39.00 33.50 23.90 19.68 6000 16 x 14 16.00 14.00 33.00 33.00 25.60 21.45 16.92 2644
500 508 991 991 850 607 500 2200 400 x 350 406 356 838 838 650 545 430 1190
22 22.00 43.00 43.00 37.00 24.10 21.00 6222 18 x 16 18.00 16.00 36.00 36.00 28.00 23.62 18.50 3338
550 559 1092 1092 940 612 533 2800 450 x 400 457 406 914 914 710 600 470 1500
24 24.00 45.00 45.00 39.70 24.50 23.62 8000 20 x 16 20.00 16.00 39.00 39.00 30.70 24.40 20.07 3777
600 610 1143 1143 1010 622 600 3600 500 x 400 508 406 991 991 780 620 510 1700
26 26.00 49.00 49.00 42.50 24.80 22.80 20 x 18 20.00 18.00 39.00 39.00 30.40 24.40 20.07 4666
(1)
650 660 1245 1245 1080 630 580 500 x 450 508 457 991 991 780 620 510 2100
28 28.00 53.00 53.00 45.30 25.20 26.60 24 x 20 24.00 20.00 45.00 45.00 36.00 25.10 19.68
(1) (1)
700 711 1346 1346 1150 640 675 600 x 500 610 508 1143 1143 915 637 500
30 30.00 55.00 55.00 48.40 27.60 28.70 30 x 24 30.00 24.00 55.00 55.00 42.90 25.80 21.20
(1) (1)
750 762 1397 1397 1230 700 730 750 x 600 762 610 1397 1397 1090 655 540
32 32.00 60.00 60.00 52.00 29.30 29.90 36 x 30 36.00 30.00 68.00 68.00 50.00 27.60 28.70
(1) (1)
800 813 1524 1524 1320 745 760 900 x 750 914 762 1727 1727 1270 700 730
34 34.00 64.00 64.00 54.50 29.90 31.50 (1) •) Other dimension on request.
850 864 1626 1626 1380 760 800
36 36.00 68.00 68.00 56.9 31.70 32.5
(1)
900 914 1727 1727 1445 805 825
40 40.00 77.00 77.00 64.10 35.40 36.2
(1)
1000 1016 1956 1956 1630 900 920
42 42.00 82.00 82.00 66.90 38.10 38.40
(1)
1050 1067 2083 2083 1700 968 980
48 48.00 85.40 85.40 74.80 43.30 45.60
(1)
1200 1219 2170 2170 1960 1100 1160
56 53.54 108.00108.00 89.00 50.00 50.00
(1)
1400 1360 2743 2743 2260 1270 1270
- Flanges in accordance with ASME B16.5 - Butt welding ends according to ASME B16.25
- Shaded bore sizes (D) according to API 6D - Shaded end-to-end dimensions according to API 6D
Weight figures are relevant to flanged end valves. (1) Please consult the factory. Note. For dimensions and weights in larger sizes consult the factory.
Dimensions B, C, D, E and weights are subject to change without notice.
10