Processing, Properties, and Design of Advanced Ceramics and Composites II

437 Pages·2017·20.03 MB·English

by  Narottam P. Bansal

Processing, Properties, and
Design of Advanced Ceramics
and Composites II

Processing, Properties, and
Design of Advanced Ceramics
and Composites II
Ceramic Transactions, Volume 261
Edited by
Narottam P. Bansal
Ricardo H. R. Castro
Michael Jenkins
Amit Bandyopadhyay
Susmita Bose
Amar Bhalla
J.P. Singh
Morsi M. Mahmoud
Gary Pickrell
Sylvia Johnson
This edition first published 2017
© 2017 The American Ceramic Society
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording
or otherwise, except as permitted by law. Advice on how to obtain permission to reuse material
from this title is available at http://www.wiley.com/go/permissions.
The rights of Narottam P. Bansal, Ricardo H. R. Castro, Michael Jenkins, Amit Bandyopadhyay,
Susmita Bose, Amar Bhalla, J.P. Singh, Morsi M. Mahmoud, Gary Pickrell, and Sylvia Johnson
to be identified as the authors of the editorial material in this work have been asserted in ac-
cordance with law.
Registered Office
John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA
Editorial Office
111 River Street, Hoboken, NJ 07030, USA
For details of our global editorial offices, customer services, and more information about Wiley
products visit us at www.wiley.com.
Wiley also publishes its books in a variety of electronic formats and by print-on-demand. Some
content that appears in standard print versions of this book may not be available in other for-
mats.
Limit of Liability/Disclaimer of Warranty
In view of ongoing research, equipment modifications, changes in governmental regulations,
and the constant flow of information relating to the use of experimental reagents, equipment,
and devices, the reader is urged to review and evaluate the information provided in the pack-
age insert or instructions for each chemical, piece of equipment, reagent, or device for, among
other things, any changes in the instructions or indication of usage and for added warnings
and precautions. While the publisher and authors have used their best efforts in preparing this
work, they make no representations or warranties with respect to the accuracy or complete-
ness of the contents of this work and specifically disclaim all warranties, including without lim-
itation any implied warranties of merchantability or fitness for a particular purpose. No warran-
ty may be created or extended by sales representatives, written sales materials or promotional
statements for this work. The fact that an organization, website, or product is referred to in this
work as a citation and/or potential source of further information does not mean that the pub-
lisher and authors endorse the information or services the organization, website, or product
may provide or recommendations it may make. This work is sold with the understanding that
the publisher is not engaged in rendering professional services. The advice and strategies
contained herein may not be suitable for your situation. You should consult with a specialist
where appropriate. Further, readers should be aware that websites listed in this work may have
changed or disappeared between when this work was written and when it is read. Neither the
publisher nor authors shall be liable for any loss of profit or any other commercial damages, in-
cluding but not limited to special, incidental, consequential, or other damages.
Library of Congress Cataloging-in-Publication Data is available
ISBN: 9781119423805
ISSN: 1042-1122
Cover design by Wiley
10 9 8 7 6 5 4 3 2 1
Contents
Preface xi
ADVANCES IN COMPOSITES
The Effect of Paste Water Content on the Green Microstructure of 3
Extruded Titanium Dioxide
Mustafa Kanaan Alazzawi and Richard A. Haber
Compaction Plasticity of Spray Dried Alumina Granules to Form 15
Microstructural Uniformity and Green Strength
I. P. Maher and R. A. Haber
A Model for the Numerical Simulation of Liquid Silicon Infiltration 23
into Porous Carbon/Carbon Preforms
Khurram Iqbal, Sudhanshu Dwivedi, and Stevens Cadet
Foreign Object Damage in a SiC Fibrous Composite 33
Nesredin Kedir, David Faucett, Luis Sanchez, and Sung R. Choi
INTERNATIONAL STANDARDS FOR PROPERTIES AND
PERFORMANCE OF ADVANCED CERAMICS
ASTM Subcommittee C28.01 Mechanical Properties and Reliability 47
Michael G. Jenkins
ASTM Committee C28: International Standards for Properties and 59
Performance of Advanced Ceramics-Three Decades of High-Quality,
Technically-Rigorous Normalization
Michael G. Jenkins and Jonathan A. Salem
ASTM Subcommittee C28.07 Ceramic Matrix Composites 81
Michael G. Jenkins and Andrew Wereszczak
v
Activities in ISO/TC206 Fine Ceramics—A Quarter Century of 95
Progress
Shuji Sakaguchi
SINTERING AND RELATED POWDER PROCESSING
The Usage of Heat Explosion to Synthesize Intermetallic 111
Compounds and Alloys
Karina Belokon and Yuriy Belokon
Structural Characterization of Carbon-Based Materials Obtained 117
by Spark Plasma Sintering of Non-Graphitic Carbon with Nickel
and Iron as Catalysts and Space Holders
A. V. Ukhina, B. B. Bokhonov, D. V. Dudina, K. Yubuta, and H. Kato
On the Effect of Electric Field during Spark Plasma Sintering—A 127
“Faraday Cage” Approach
Anil Prasad, Somi Doja, and Lukas Bichler
Enhancement of Diffusion Bonding of Silver Graphite to Copper 137
by Severe Plastic Deformation
Daudi R. Waryoba
SURFACE PROPERTIES OF BIOMATERIALS
Hydroxyapatite Precipitation on Ti-6Al-4V and Ti-6Al-7Nb Alloys: 153
Effect of Surface Conditions
Mahmoud Abdel-salam, Waleed Khalifa, and Shimaa El-Hadad
Microstructure and Mechanical Properties of Heat Treated 169
Ti-6Al-7Nb Alloy
Ahmed Fityan, Shimaa El-Hadad, and Waleed Khalifa
Surface Modification of Titanium Foams Produced by 179
Freeze-Casting
Silvia Briseño Murguia, Joshua Barclay, Samir M. Aouadi, and
Marcus L. Young
The Effect of Plastic Deformation on the Cell Viability and 187
Adhesion Behavior in Metallic Implant Materials
B. Uzer and D. Canadinc
vi · Processing, Properties, and Design of Advanced Ceramics and Composites II
INNOVATIVE PROCESSING
Influence of Hot-Pressing Time on Phase Evolution of SHS 199
Obtained Ti AlC Active Precursor Powder
2
L. Chlubny, J. Lis, P. Borowiak, and K. Chabior
Increasing the Silicon Carbide Content in Laser Sintered 207
Reaction Bonded Silicon Carbide
Sebastian Meyers, Lien De Leersnijder, Jef Vleugels, and Jean-Pierre Kruth
Challenges in Spark Plasma Sintering of Cerium (IV) Oxide 217
Anil Prasad, Linu Malakkal, Lukas Bichler, and Jerzy Szpunar
DIELECTRIC MATERIALS AND ELECTRONIC DEVICES
Study of the Dielectric Response of Rare-Earth Modified PZT 227
Ferroelectric Ceramics—An Approach to the Diffuse Phase
Transition
S. P. Hessel, A. C. Silva, R. Guo, A. S. Bhalla, and J. D. S. Guerra
Influence of Processing and Microstructure on Dielectric 237
Properties of Calcium Copper Titanate Ceramics
Disna P. Samarakoon, Nirmal Govindaraju, and Raj N. Singh
Effect of A-Site Doping by La, Ba, and Ca on Thermoelectric 245
Properties of Sr FeTiO Double Perovskites
2 6
P. Roy and T. Maiti
PROCESSING AND PERFORMANCE OF MATERIALS USING
MICROWAVES, ELECTRIC, AND MAGNETIC FIELDS
Change of Energy Transfer Medium from High Temperature Gas 255
to Microwave
Kazuhiro Nagata and Motoyasu Sato
Effect of Laser Shock Peening (LSP) on AISI L6 Hot Work Tool 267
Steel
Sachin Patil, Valmik Bhavar, Prakash Kattire, P. P. Date, and
Rajkumar Singh
Comprehending Microwave-Enhanced Isothermal Process 275
Kinetics in Ceramic Processing
Boon Wong
Processing, Properties, and Design of Advanced Ceramics and Composites II · vii
THERMAL PROTECTION MATERIALS AND SYSTEMS
Characterization of Deposits Found on Carrier Panel Tiles 293
Recovered from the Space Shuttle Columbia
Brenda R. Arellano, Stephen W. Stafford, Darren M. Cone, and
Mayra Contreras
Unlocking the Thermal Protection Potential of Ceramic Matrix 305
Composites
R. Cook
Determination of the Mechanical Properties of the Lightweight 311
Ablative Material ZURAM
Thomas Reimer, Christian Zuber, Jakob Rieser, and Thomas Rothermel
ADVANCED MATERIALS FOR HARSH ENVIRONMENTS
In Situ TEM Observations of Corrosion in Nanocrystalline Fe 329
Thin Films
David Gross, Josh Kacher, Jordan Key, Khalid Hattar, and Ian M. Robertson
Removal and Separation of Metal Ions from the Chromium 339
Plating Wastewater using Persimmon Gel and Immobilized
Microbe
Takehiko Tsuruta and Tomonobu Hatano
ZIRCONIA BASED MATERIALS
Microstructural Evolution and Tribocorrosion Performance of 355
Novel Laser Clad Ti-Ni-ZrO Composite Coatings in 3.5% NaCl
2
Solution
Babatunde A. Obadele, Oladeji O. Ige, and Peter A. Olubambi
The Evolution of the Structure and the Transport Properties of 365
ZrO -Y O , ZrO -Sc O and ZrO -Y O -Sc O Crystals, Obtained
2 2 3 2 2 3 2 2 3 2 3
by Skull Melting Technique
M. A. Borik, S. I. Bredikhin, V. T. Bublik, A. V. Kulebyakin, I. E. Kuritsyna,
E. E. Lomonova, F. O. Milovich, V. A. Myzina, V. V. Osiko, P. A. Ryabochkina,
S. V. Seryakov, and N. Yu. Tabachkova
CONTROLLED SYNTHESIS, PROCESSING, AND APPLICATIONS
OF STRUCTURAL AND FUNCTIONAL NANOMATERIALS
Preparation and Characterization of Poly (Meta-Phenylene 381
Isophthalamide) Microporous Membranes by Coaxial Electrospinning
Weiwang Chen and Wenguo Weng
viii · Processing, Properties, and Design of Advanced Ceramics and Composites II