Perspectives from Europe and Asia on Engineering Design and Manufacture: A Comparison of Engineering Design and Manufacture in Europe and Asia

775 Pages·2004·32.88 MB·English

by  Keith Case (auth.), Xiu-Tian Yan, Cheng-Yu Jiang, Neal P. Juster (eds.)

Perspectives from Europe and Asia on Engineering Design
and Manufacture
Perspectives from Europe and Asia
on Engineering Design and
Manufacture
A Comparison of Engineering Design and Manufacture in
Europe and Asia
Edited by
XIU-TIAN YAN
University of Strathclyde,
Department of Design, Manufacture and Engineering Management,
Glasgow, Scotland, u.K.
CHENG-YU JIANG
Northwestern Poly technical University,
China
and
NEAL P. JUSTER
University of Strathclyde,
Glasgow, Scotland, U.K.
SPRINGER SCIENCE+BUSINESS MEDIA, LLC
A c.I.P. Catalogue record for this book is available from the Library of Congress.
Printed on acid-free paper
ISBN 978-94-015-7003-9 ISBN 978-1-4020-2212-8 (eBook)
DOl 10.1007/978-1-4020-2212-8
Softcover repriot of the hardcover Ist edition 2004
All Rights Reserved
© 2004 Springer Science+Business Media New York 2004
Originally published by Kluwer Academic Publishers 2004
No part of this work may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, microfilming,
recording or otherwise, without written permission from the Publisher, with the
exception of any material supplied specifically for the purpose of being entered
and executed on a computer system, for exclusive use by the purchaser of the work.
TABLE OF CONTENTS
PREFACE ................................................................................................ XIII
ACKNOWLEDGEMENTS .....•...................•....•.......•....••....•....•.....•....•... XV
PART 1
KNOWLEDGE INTENSIVE METHODOLOGIES AND TOOLS
SUPPORTING ENGINEERING DESIGN AND MANUFACTURE ...•.. 1
KNOWLEDGE ENGINEERING IN PRODUCT AND PROCESS DESIGN
Keith Case ............................................................................................ 3
A PROPOSAL OF DESIGN VISION FOR ARTIFACT DESIGN AND
PRODUCTION IN THE 21ST CENTURY
Teruyuki Monnai, Eiji Arai, Juhachi Oda, Tetsuo Tomiyama and
Akihiro Hotta ...................................................... , ............................... 19
RESEARCH OF VIRTUAL PROTOTYPING FOR AUTO-BODY SHEET
METAL ASSEMBLY
Wen/eng Zhu, Xinmin Lai and Zhongqin Lin ..................................... 31
A RETRIEVAL AGENT ARCHITECTURE FOR RAPID PRODUCT
DEVELOPMENT
Stavros Dalakakis, Emil A. Stoyanov and Dieter Roller .................... 41
COMPUTER-AIDED TECHNIQUES IN MANUFACTURING OF LARGE
HYDRO TURBINE'S BLADES
Xi-De Lai, Ci-Chang Chen and Qing-Gang Li .................................. 59
USING CONTEXT KNOLEDGE BASED REASONING TO SUPPORT
FUNCTIONAL DESIGN
Fayyaz Rehman and Xiu-Tian Yan ..................................................... 69
VIRTUAL PRODUCT DEVELOPMENT
Wenli Zhang, Dieter Roller, Wenlin Chen and Hongfu Zuo .............. 79
GRAPH BASED REPRESENTATION IN DESIGN OF
MULTIFUNCTIONAL STRUCTURE
Yuemin Hou, Linhong Ji and Dewen Jin ............................................ 89
vi
PATCH UNIT METHOD FOR CAD SURFACE MODELS
Xingbo Wang and Jin-Long Shi ......................................................... 99
VISUAL AIDED PROTOTYPE OF PRINCIPLE SOLUTION IN
PRODUCT CONCEPTUAL DESIGN FOR CHIEF ENGINEERS
Fei Zheng, Mei Chen, Hongmei Zeng and Baoyan Duan ................ 109
PROACTIVE SUPPORT FOR PRODUCT CONCEPTUAL DESIGN
INCORPORATING MANUFACTURING SYSTEM CONSIDERATIONS
Zifang Wu, Xiu-Tian Yan, Jianhua Yang andXiansheng Qin .......... 115
AUTOMATED GENERATION OF DIMENSION CHAINS FOR AUTO-
BODY DIMENSIONAL QUALITY EVALUATION .................................. ..
Jiangqi Zhou, Guanlong Chen, Xinmin Lai and Zhongqin Lin ........ 125
GENETIC ALGORITHM-BASED SCHEME GENERATION FOR
MECHANICAL PRODUCTS IN CONCEPTUAL DESIGN
Rui-Feng Bo, Hong-Zhong Huang, Ying-Kui Gu and Li-Hua Xue .. 135
RESEARCH ON PRODUCT MODELING TECHNOLOGY FOR
DISASSEMBLY
Weixiang Guo, Guangfu Liu, Zhifeng Liu and Haihong Huang ...... 145
MULTIOBJECTIVE OPTIMIZATION-BASED MANUFACTURABILITY
EVALUATION FOR PART STRUCTURE
ShanJiang, Yuxin WangandYiming Yang ...................................... 155
A VIRTUAL PRODUCT FAMILY TO SUPPORT DESIGN FOR
CUSTOMERS
Yan Li, Shujuan Li and Shaokun Wei ............................................... 165
THE RESEARCH ON INTEGRATED SYSTEM OF MECHANICAL
PRODUCT INTELLIGENT DESIGN AND MANAGEMENT DECISION
SUPPORT IN CE ENVIRONMENT
JingXin Chen, Jing Xu, Hong Li, JiPing Zhou and Lan Cai ............ 175
A STUDY OF DECISION-MAKING ON PROCESS METHODS
SELECTION BASED ON GA
Qing-Jun Lee and Tan-Cheng Xie .................................................... 187
CAD MODELING OF STRAIGHT BEVEL GEARS
Wei Wei, Keke Zhu, Luling An and Laishui Zhou ............................ 195
Vll
THE RESEARCH OF A NEW GEOMETRIC CONSTRAINT SOLVER
Chunhong Cao, Wei Fu and Wenhui Li .......................................... 205
MODELING OF COM-BASED VIRTUAL FMS .......................................... .
Guo-Fu Ding, Kai-Yin Yan, Zhao-Xue Gao and Yi-Shen Zou ......... 215
PART 2
DESIGN EDUCATION AND COLLABORATIVE WORKING IN
DESIGN AND MANUFACTURE .......................................................... 223
EDUCATING THE GLOBAL DESIGNER
William J Ion, Andrew Wodehouse, Neal Juster, Hilary Grierson and
Angela Stone ..................................................................................... 225
WEB EDUCATION PORTAL FOR THE TEACHING OF MECHANICAL
DESIGN AND MANUFACTURING
Didier Remond, Alexandre Toumine, Benoit Eynard, Nadege
Troussier, Alain Daidie, Jean-Pierre Devaujany, Samuel Gomes and
Lionel Roucoules .............................................................................. 237
FRAMEWORK FOR MECHATRONICS SYSTEMS DESIGN
Lars Hein .......................................................................................... 251
COLLABORATIVE AND REMOTE DESIGN OF MECHATRONIC
PRODUCTS
Benoit Eynard and Samuel Gomes ................................................... 261
COMPARISONS OF CHINA'S EDUCATION IN SCIENCE AND
TECHNOLOGY TO THE DEVELOPED WORLD
Xincai Tan and Xiu-Tian Yan ........................................................... 271
CASE STUDY OF COLLABORATIVE KNOWLEDGE MANAGEMENT
IN THE EARLY PHASES OF PRODUCT DEVELOPMENT
James Gao, Hayder Aziz, Paul Maropoulos and Wai M Cheung .... 283
A DEVELOPMENT ON MANUFACTURING INFORMATION
COMMUNICATION IN AGILE MANUFACTURING WITH STEP AND
XML
Xiaoli Qiu and Hong Yi .................................................................... 297
viii
WEBCAPP: COLLABORATIVE INTELLIGENT PROCESS PLANNING
SYSTEM
Jitender Rai and S.S.Pande ............................................................ 307
COORDINATION COMPONENT BASED ON PETRI NET FOR
COLLABORATIVE DESIGN
Feng Zhou, Hong-Zhong Huang and Xu Zu .................................... 317
DYNAMIC DATA EXCHANGE IN THE COLLABORATIVE DESIGN
BASED ON INTERNET ENVIRONMENT
Tianhong Luo, Xiaoan Chen, Lihong Lin, Bing Zhang and Zhihong
Xian .................................................................................................. 327
THE IMPACT OF DOCUMENTATION AND REFLECTION ON
STUDENT LEARNING IN ENGINEERING DESIGN
A. Wodehouse, H Grierson, WJ. Ion, N. Juster and A.S. Stone ...... 337
PART 3
MATERIALS DESIGN AND THEIR MANUFACTURE ,
MANUFACTURE AND MANUFACTURING AUTOMATION ........ 347
ALUMINOTHERMIC REDUCTION OF ZIRCONIA
Xiaoli Zhe, C A Dioka and A Hendry ............................................... 351
MODELING THE OXIDATION AND CORROSION BEHAVIOR OF 3D
CARBON FIBER REINFORCED SIC MATRIX COMPOSITES FROM
400 TO 1500 DEGREES C
Qingfeng Zeng, Laifei Cheng, Litong Zhang, Xingang Luan, Xiaowei
Yin and Yongdong Xu ....................................................................... 363
DIRECTIONAL BEAM BASED APPROACH APPLIED TO THE
CHOICE OF MACHINING DIRECTION FOR A SCULPTURED PART
Yann Quinsat, Laurent Sabourin and Grigore Gogu ....................... 373
A DISTRIBUTED PRODUCTION CONTROL SYSTEM ON A
COMPONENT-BASED SOFTWARE DEVELOPMENT AND
OPERATION FRAMEWORK
Hiroyki Sawada, Norio Matsuki and Hitoshi Tokunaga .................. 383
IX
JOB-SHOP SCHEDULING USING IMMUNE ALGORITHM BASED ON
DYNAMIC EVALUATION
Jianjun Yu, Shudong Sun and Ganggang Niu .................................. 393
PREVENTIVE MAINTENANCE AND JOINT BUFFER INVENTORY
FOR PARALLEL MACHINES
Valerio Boschian, Nidhal Rezg and Gilles Cormier ........................ 405
DESIGN AS PRODUCTIVE SCIENCE
Yuemin Hou, Linghong Ji and Dewen Jin ........................................ 417
OPTIMIZATION OF CUTTING PARAMETERS FOR PERIPHERAL
MILLING BASED ON MACHINING STABILITY
Yong Chen and Xiong-Wei Liu ......................................................... 427
A REMOTE TECHNIQUE SUPPORT SYSTEM OF ENGINEERING
EQUIPMENT
Huan-Liang Li, Qi Zhang, Cheng-Xian Yang and Song-Hui Guo ... 439
METHODS FOR RECONFIGURING MULTI-AGENT AND SELECTING
SENSOR IN RECONFIGURING MONITORING SYSTEM BASED ON
KNOWLEDGE
Youping Fan, Yunping Chen and Wansheng Sun ............................. 449
REAL-TIME QUALITY MONITORING TECHNOLOGY FOR POWDER
COMPACTING PROCESS
Ge-Wei Chen .................................................................................... 459
APPLYING GSPN THEORY ON PERFORMANCE ANALYSIS OF THE
SERIAL AND PARALLEL PRODUCTION SYSTEMS
Jianhua Gao, Xudong Hu and Ruqing yang .................................... 469
OPTIMIZATION DESIGN OF HYDRAULIC SERVO ACTUATORS
WITH 3-D.O.F. AND MOTION DECOUPLING
Xinglong Zhu, Jiping Zhou and Jianhua Zhou ................................. 479
A FRAMEWORK FOR CIGARETTE SUPPLY CHAIN IN THE
MONOPOLY ENVIRONMENT
Tianfei Li and Linyan Sun ................................................................ 489
THE OPTIMIZATION APPROACH OF ASSEMBLY SEQUENCE
BASED ON GENETIC ALGORITHM
Chun-Shu Li, Li-Min Dai and Li-Min Wang .................................... 499
x
THE APPLICATION OF THE FUZZY EVALUATION IN LASER
MICRO-MANUFACTURING SYSTEM
Hui-Lai Sun, Shu-Zhong Lin, Jin-Gang Wang, Hong-Lai Li and XM
Liu .................................................................................................... 507
STUDY ON CONCURRENT DEIGN IN FORMING DIE FOR ITS LIFE
F eng Ni and Jianping Lin ................................................................. 515
STUDY ON THE ARCHITECTURE OF RECONFIGURABLE
ASSEMBLY SYSTEM
Fanli Meng, Xuemei Huang, Dalong Tan and Yuechao Wang ....... 521
COMBINE AGENT AND HOLON APPROACH FOR
MANUFACTURING SCHEDULING IN CAPP!PPC ................................... .
Shujuan Li and Yan Li ...................................................................... 533
AN ALGORITHM OF TOOL PATH GENERATION FOR PARTS WITH
REGULAR FEATURES
Luling An, Laishui Zhou, Wei Wei and Rurong Zhou ...................... 543
SIMULATION OF THE MACHINING ERROR OF CNC GEAR SHAPER
BASED ON MULTI-BODY SYSTEM THEORY
Shuxin Wang, Yanzheng Li, and Jintian Yun .................................... 551
MULTI-AGENT SYSTEMS FOR CRACKING SUPPLY CHAIN
BULLWHIP EFFECT
Oboulhas Tsahat Conrad Onesime, Xiaofei Xu, Dechen Zhan and
Kimutai Kimeli ................................................................................. 559
A 3D DIGITIZING MEASUREMENT SYSTEM BASED ON NOVEL
PASSIVE ROBOT
Li-Bin Du, Xiao-Hui Gao, Hao Wang, Jing-Dong Zhao and Hong Liu
.......................................................................................................... 569
RESEARCH OF REMOTE CONTROL SYSTEM BASED ON FIELD BUS
AND INTERNET
Tan-Cheng Xie and Ke Hu ............................................................... 577
Xl
PART 4
PRODUCT DEVELOPMENT AND DESIGN PRACTICE ................ 585
INTEGRATION OF PRODUCT - PROCESS - ORGANISATION FOR
ADVANCED ENGINEERING DESIGN
Philippe Girard and Benoit Eynard ................................................. 587
A UNI-AXIAL TEST RIG DESIGN APPROACH FOR DEFORMATION
ANALYSIS OF FLEXIBLE PARTS DUE TO LOCATION TYPE
TOLERANCE IN ASSEMBLY
Irfan A Manarvi and NP Juster ....................................................... 599
GENERATING MECHANISM AND EXPERIMENTAL STUDY ON
IMPACTING WATER JET BY MODULATION OF CHAOS
Xin-Min Zhang and Xiong Duan ...................................................... 609
DESIGN ANALYSIS AND MANUF ACTUIRNG PLANNING USING ISO
010303 STEP AP224
Rohit Sharma and James X Gao ..................................................... 621
STUDY ON QUALITY EVALUATION TECHNIQUE FOR
RESEARCHING AND DEVELOPING SYSTEM OF MECHANICAL
PRODUCTS
Qi Zhang, Cheng-Xian Yang, Huan-Liang Li and Wei Sun ............. 635
CONFIGURATION MANAGEMENT USING STANDARD TOOLS ......... .
Marian Mdina and Dieter Roller .................................................... 645
THE APPLICATION OF SSE TECHNIQUE IN FAST
RECONSTRUCTION
Haipeng Mao, Dinghua Zhang, Liang Liang, Juan Gu and Qingsheng
Wang ................................................................................................ 659
CALCULATING ELASTIC MODULUS OF BOTH ENDS FIXED
POLY SILICON MICROBEAMS WITH TRAPEZOIDAL CROSS
SECTION
Guangping Han, Kai Liu and Xiuhong Wang ................................. 669
A WEB-BASED OPTIMIZATION FOR FUNCTION SYNTHESIS OF
PLANAR LINKAGE
Lei Song and Xin Wu ........................................................................ 677