Operating Manuals Sequential Timer Make Piecoe

0.32 MB·English

by  Process Instrumentation & Engineering Co.

Process Instrumentation & Engineering Co.
D-368 (1st. Floor), Koelnagar, Rourkela- 769014, Odisha, India
Phone: [phone], Mob: [phone]
Email: [email protected], [email protected] WEB: www.instrumentsprocess.net

Process Instrumentation & Engineering Co., manufacturing, sales and supply
“PIECO” brand sequential timer suitable for Industrial dust collecting bag filters.
“PIECO” sequential timer an electronics divice or timer through which one
Solenoide vales for air pulsing operated within a perticulart time given and
continously opetate as require.
Sequential Timer

Process Instrumentation & Engineering Co. manufacturing, sales and supply
“PIECO” sequential timer cards as-
Con…..Page-2
Page -2

Type : PIECO/SQ/10-Ch
Chanel Out Put: Maximum 10 Chanel.
Chanel Out-Put Setting: Through Jumper on front and step will be change on
front from 2 to 10 ch.
Time ON: Pulse frequency Range can be adjustable 20 to 200 millisecond.
Time OFF: Pulse frequency Range can be adjustable 2 to 60 Second.
Main Line Indication : LED light.
Out-Put Channel Indication: LED Red color light.
Time Setting : Through Preset pot in front for OFF and ON time setting.
Step type : Sequential and after another and revert.
Field Wiring Procedure:
A 26-POINT terminal or suitable equivalent type block for connection of
conductors is provided ion the time for convenient wiring of the control power,
loads and remote contact whenever applicable.
Wiring diagram illustrates, where all necessary wiring should be made. Load
should be wired in desired sequences as needed. Only after all connection has
been re-checked, should power be applied to the controller.

Note: Sequential timer card should not used in field without proper protective
enclosures. Sequential timer card should not operate without proper volt/amp
glass fuse.
Con…..Page-3
Page-3

Order Process
ModeNo In put Voltage Out put Voltage Tota Chanel
PIECO/SQ/220/220/10 220 V A/c. 220 V A/c. 10
PIECO/SQ/220/110/10 220 V A/c. 110 V A/c. 10
PIECO/SQ/220/24/10 220 V A/c. 24 V A/c./D/C 10
PIECO/SQ/110/110/10 110 V A/c. 110 V A/c. 10
PIECO/SQ/110/24/10 110 V A/c. 24 V A/c. 10
PIECO/SQ/24/24/10 24 V A/c./DC 24 V A/c./DC 10
** Also 18, 24, 28, 32 output channels on Request.

When you or Purchaser ordering “PIECO” Sequential timer Cards please go through our model number
i.e. Your required (1) In-Put-Voltage, (2) Out-Put-Voltage, Out-PUT-Sequence for Solenoid Valves.
Sequential Timer Card by Process Instrumentation & Engineering co “PIECO” unique for its quality and
commercially economy and also ready available spares.
If any complain arises against manufacturing defects within a very short period it can be replace or
repair ( at Rourkela,Odisha, India ) works only.
Any Enquiry / Technical / Details may contact:
Process Instrumentation & Engineering Co.
D-368 (1st. Floor), Koelnagar, Rourkela- 769014, Odisha, India
Cell/Mobile No: [phone], Land Line: [phone]
Email: [email protected], [email protected]
Web site: http://www.instrumentsprocess.net