NI 43-101 Technical Report Ada Tepe Deposit, Krumovgrad Project, Bulgaria

249 Pages·2014·5.83 MB·English

Effective Date: 21st March 2014
Report Number: R135.2014

DUNDEE PRECIOUS METALS INC.
NI 43-101 Technical Report
Ada Tepe Deposit, Krumovgrad Project, Bulgaria

By
Galen White (QP)
BSc (Hons) FAusIMM FGS
And
Julian Bennett (QP)
BSc ARSM FIMMM CEng
And
Simon Meik (QP)
BSc (Hons), PhD, FAusIMM (CP)
And
Peter Corrigan (QP)
BAI, C.Eng

For: Approved:
Dundee Precious Metals Inc.
1 Adelaide Street East
Suite 500, P.O. Box 195 Galen White
Toronto, Ontario “signed and sealed”
M5C 2V9, Canada _________________
Galen White
Managing Director - UK
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

Certificate of Qualified Person – Galen White
As a Qualified Person of this Technical Report on the Ada Tepe Deposit of Dundee Precious
Metals Inc., Bulgaria, I, Galen White do hereby certify that:
1) I am a Director and Principal Consultant of CSA Global (UK) Ltd, and carried out this
assignment for CSA Global (UK) Ltd, 2 Peel House, Barttelot Road, Horsham, West Sussex,
RH12 1DE, UK Telephone [phone], e-mail: [email protected]
2) The Technical Report to which this certificate applies is titled “NI 43-101 Technical Report –
Ada Tepe Deposit, Krumovgrad Project, Bulgaria” and is dated effective 21st March 2014.
3) I hold a BSc (Hons) degree in Geology from the University of Portsmouth, England (1996)
and am a registered Fellow in good standing of the Australasian Institute of Mining and
Metallurgy (FAusIMM Membership Number 226041) and a Fellow of the Geological Society,
London (Member Number 1003505). I am familiar with NI 43-101 and, by reason of
education, experience in exploration, evaluation and mining of epithermal and vein hosted
mineral deposits in Europe and Australia, and professional registration; I fulfil the
requirements of a Qualified Person as defined in NI 43-101. My experience includes 17
years in mineral exploration and resource evaluation.
4) I visited the project that is the subject of this Technical Report, between 5th-9th November
2012 for a combined total of 5 days.
5) I am responsible for the following sections of this Technical Report; Sections 1-12, 14, 20.1-
20.7, 20.9, 23, 24.1-24.9, 24.12 and 25-27.
6) I am independent of the issuer as described in Section 1.5 of NI 43-101.
7) I have had prior involvement with the property that is the subject of this Technical Report,
being a visit to the project in November 2012 for the purposes of reviewing data and
validating the Mineral Resource Estimate, as a precursor to the preparation of this
Technical Report.
8) I have read NI 43-101 and the parts of the Technical Report I am responsible for have been
prepared in compliance with this instrument.
9) As of the effective date of the Technical Report, to the best of my knowledge, information
and belief, the parts of Technical Report that I am responsible for contain all scientific and
technical information that is required to be disclosed to make the Technical Report not
misleading.
Dated this 21st day of March 2014.
Galen White
“signed and sealed”

Galen White BSc (Hons), FAusIMM, FGS
Director and Principal Geologist
CSA Global (UK) Ltd.

Report Number: R135.2014 I
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

Certificate of Qualified Person – Julian Bennett
As a Qualified Person of this Technical Report on the Ada Tepe Deposit of Dundee Precious
Metals Inc., Bulgaria, I, Julian Bennett do hereby certify that:
1) I am an Independent Mining Consultant to CSA Global (UK) Ltd, and carried out this
assignment for CSA Global (UK) Ltd, 2 Peel House, Barttelot Road, Horsham, West Sussex,
RH12 1DE, UK Telephone [phone], e-mail: www.csaglobal.com
2) The Technical Report to which this certificate applies is titled “NI 43-101 Technical Report –
Ada Tepe Deposit, Krumovgrad Project, Bulgaria” and is dated effective 21st March 2014.
3) I hold a BSc degree in Mining from the Royal School of Mines, London. I am a Fellow of the
UK Institute of Materials, Minerals and Mining and am a Chartered Engineer. I am familiar
with NI 43-101 and, by reason of education, experience in the evaluation and mining of
epithermal and vein hosted mineral deposits in Europe, Africa, Asia, Australia and the
Americas, and professional registration; I fulfil the requirements of a Qualified Person as
defined in NI 43-101. My work experience includes 48 years in the mining industry.
4) I have not visited the project site that is the subject of this Technical Report, however I
visited the offices of the company in Sofia, Bulgaria between 24th and 28th February 2014
for a total of 5 days, during which time I held discussions with the Technical Team involved
in the project which is the subject of this Technical Report.
5) I am responsible for the following sections of this Technical Report; Sections 15, 16, 18.2-
18.12, 21, 22, 24.10.2 and 24.11.
6) I am independent of the issuer as described in Section 1.5 of NI 43-101.
7) I have had no prior involvement with the property that is the subject of this Technical
Report.
8) I have read NI 43-101 and the parts of the Technical Report I am responsible for have been
prepared in compliance with this instrument.
9) As of the date of this certificate to the best of my knowledge, information and belief, the
parts of Technical Report that I am responsible for contains all scientific and technical
information that is required to be disclosed to make this report not misleading.
Dated this 21st day of March 2014.
Julian Bennett
“signed and sealed”

Julian Bennett BSc, ARSM, FIMMM, CEng
Mining Consultant to CSA Global (UK) Ltd

Report Number: R135.2014 II
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

Certificate of Qualified Person – Simon Meik
As a Qualified Person of this Technical Report on the Ada Tepe Deposit of Dundee Precious
Metals Inc., Bulgaria, I, Simon Meik do hereby certify that:
1) I hold the position of Vice President, Processing, of Dundee Precious Metals Inc. the parent
company of Dundee Precious Metals Krumovgrad (“DPMKr”), 26 Bacho Kiro, Sofia 1000,
Bulgaria.
2) The Technical Report to which this certificate applies is titled “NI 43-101 Technical Report –
Ada Tepe Deposit, Krumovgrad Project, Bulgaria” and is dated effective 21st March 2014.
3) I hold a BSc degree and PhD in Minerals Engineering from the University of Birmingham,
UK. I am a Chartered Professional Member of the Australasian Institute of Mining and
Metallurgy (FAusIMM (CP) Membership Number 106146). I am familiar with NI 43-101 and
by reason of my 35 years in the mining industry, work experience since graduation and
professional registration, I fulfil the requirements of a Qualified Person as defined in NI 43-
101.
4) I have visited the project site that is the subject of this Technical Report at various times
between 2004 and 2013, the last visit taking place between 5th and 6th December 2013 for a
duration of two days.
5) I am responsible for the following sections of this Technical Report; Sections 13, 17, 19,
24.10.1, 24.10.3 and 24.10.5.
6) I am not independent of the issuer as described in Section 1.5 of NI 43-101.
7) I have had prior involvement with the property that is the subject of this Technical Report
as Vice President – Processing and previously as Operations Manager of Dundee Precious
Metals Inc. My involvement with the project since 2004 has included supervision of all
metallurgical testwork, process development and overview of plant engineering designs
together with “in-country” coordination of the 2005 EIA and contributions to the
preparation of the 2005 and 2011 Definitive Feasibility Studies, and recent technical
updates.
8) I have read NI 43-101 and the parts of the Technical Report I am responsible for have been
prepared in compliance with this instrument.
9) As of the date of this certificate to the best of my knowledge, information and belief, the
parts of Technical Report that I am responsible for contains all scientific and technical
information that is required to be disclosed to make this report not misleading.
Dated this 21st day of March 2014.
Simon Meik
“signed and sealed”

Simon Meik BSc (Hons), PhD, FAusIMM(CP)
Vice President – Processing, Dundee Precious Metals Inc.

Report Number: R135.2014 III
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

Certificate of Qualified Person – Peter Corrigan
As a Qualified Person of this Technical Report on the Ada Tepe Deposit of Dundee Precious
Metals Inc., Bulgaria, I, Peter Corrigan do hereby certify that:
10) I hold the positions of Associate and Ground Engineer Service Manager for Golder
Associates (UK) Ltd/Golder Associates Ireland Ltd. I have been the Project Manager for
Golder for the Intergrated Mine Waste Facility Phase Design/Detailed Design project and
have led the design of the IWMF.
11) The Technical Report to which this certificate applies is titled “NI 43-101 Technical Report –
Ada Tepe Deposit, Krumovgrad Project, Bulgaria” and is dated effective 21ST March 2014.
12) I hold a BAI (Baccalaureus in Arte Ingeniaria) degree in Civil, Structural and Environmental
Engineering from Trinity College Dublin, Ireland. I am a Chartered Engineer with Engineers
Ireland (Membership Number 040106). I am familiar with NI 43-101 and by reason of my 15
years in the mining industry, work experience since graduation and professional
registration, I fulfil the requirements of a Qualified Person as defined in NI 43-101.
13) I have visited the project site that is the subject of this Technical Report in October 2012.
14) I am responsible for the following sections of this Technical Report; Section 18.1, 20.8 and
24.10.4.
15) I am independent of the issuer as described in Section 1.5 of NI 43-101.
16) I have had prior involvement with the property that is the subject of this Technical Report
prior to the commencement of the Technical Design Phase in Septebmer 2012.
17) I have read NI 43-101 and the parts of the Technical Report I am responsible for have been
prepared in compliance with this instrument.
18) As of the date of this certificate to the best of my knowledge, information and belief, the
parts of Technical Report that I am responsible for contains all scientific and technical
information that is required to be disclosed to make this report not misleading.
Dated this 21st day of March 2014.
Peter Corrigan
“signed and sealed”

Peter Corrigan – Associate and Ground Engineering Service Manager
Golder Associates (UK) Ltd/Golder Associates Ireland Ltd.

Report Number: R135.2014 IV
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

Contents
Contents .................................................................................................................................... V
Glossary .................................................................................................................................... 13
1 Executive Summary ............................................................................................................ 15
1.1 Introduction ........................................................................................................................... 15
1.2 Project Description and Location ............................................................................................ 15
1.2.1 Summary ........................................................................................................... 15
1.2.2 Mineral Rights and Tenement Description .......................................................... 15
1.2.3 Environmental Liabilities .................................................................................... 16
1.2.4 Royalties ............................................................................................................ 16
1.3 Accessibility, Local Resources and Infrastructure ..................................................................... 16
1.4 History ................................................................................................................................... 17
1.5 Geological Setting ................................................................................................................... 18
1.6 Mineralisation and Deposit Types ........................................................................................... 18
1.7 Exploration ............................................................................................................................. 18
1.8 Drilling and Surveying ............................................................................................................. 19
1.9 Sampling and Analysis ............................................................................................................ 19
1.10 Data Verification..................................................................................................................... 21
1.11 Mineral Processing and Metallurgical Testing.......................................................................... 22
1.12 Mineral Resource Estimates .................................................................................................... 23
1.13 Mining Operations .................................................................................................................. 30
1.13.1 Mineral Reserves ............................................................................................... 30
1.13.2 Development and Operations ............................................................................ 32
1.13.3 Project Implementation ..................................................................................... 34
1.14 Environmental Studies ............................................................................................................ 34
1.15 Capital and Operating Costs .................................................................................................... 35
1.16 Financial Summary ................................................................................................................... 1
1.17 Conclusions .............................................................................................................................. 4
1.18 Recommendations.................................................................................................................... 7
2 Introduction ......................................................................................................................... 8
2.1 Terms of Reference - CSA Global (UK) ....................................................................................... 8
2.2 Location ................................................................................................................................... 8
2.3 Ownership ................................................................................................................................ 8
2.4 Project Status ........................................................................................................................... 9
2.5 Principal Sources of Information ............................................................................................... 9
2.6 Site Visit ................................................................................................................................. 10
2.6.1 Site Visit Geology ............................................................................................... 10
2.6.2 Site Visit Mining ................................................................................................. 11
2.7 Independence ........................................................................................................................ 11
2.8 Forward Looking Information.................................................................................................. 11
3 Reliance on Other Experts .................................................................................................. 13
4 Property Description and Location ..................................................................................... 14
4.1 Background Information ......................................................................................................... 14
4.1.1 Bulgaria ............................................................................................................. 14
4.1.2 Krumovgrad Project ........................................................................................... 14
4.2 Project Location...................................................................................................................... 15

Report Number: R135.2014 V
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

4.3 Tenement Description ............................................................................................................ 15
4.4 Permits ................................................................................................................................... 17
4.4.1 Timeline for Approval Actions. ........................................................................... 17
4.4.2 Pre-Construction ................................................................................................ 20
4.4.3 Construction ...................................................................................................... 21
4.4.4 Pre-Operations .................................................................................................. 21
4.4.5 Operations ......................................................................................................... 22
4.5 Royalties................................................................................................................................. 22
4.6 Environmental Liabilities ......................................................................................................... 22
4.7 Other Risk .............................................................................................................................. 22
5 Accessibility, Climate, Local Resources, Infrastructure and Physiography ............................ 23
5.1 Access .................................................................................................................................... 23
5.2 Climate ................................................................................................................................... 23
5.3 Local Resources ...................................................................................................................... 24
5.4 Infrastructure ......................................................................................................................... 24
5.5 Physiography .......................................................................................................................... 24
6 History ............................................................................................................................... 25
6.1 Summary ................................................................................................................................ 25
6.2 Previous Mineral Resource Estimates...................................................................................... 25
7 Geological Setting and Mineralisation ................................................................................ 28
7.1 Regional Geology .................................................................................................................... 28
7.2 Local Geology and Mineralisation Controls.............................................................................. 30
8 Deposit Types ..................................................................................................................... 32
8.1 Deposit Setting ....................................................................................................................... 32
9 Exploration ......................................................................................................................... 34
9.1 Exploration History ................................................................................................................. 34
10 Drilling ..................................................................................................... 35
10.1 Summary ................................................................................................................................ 35
10.2 Sampling ................................................................................................................................ 37
10.2.1 Introduction ...................................................................................................... 38
10.2.2 Channel Sampling .............................................................................................. 38
10.2.3 RC Drilling .......................................................................................................... 41
10.2.4 Diamond Drilling ................................................................................................ 43
11 Sample Preparation, Analysis and Security............................................... 46
12 Data Verification...................................................................................... 53
12.1 Logging ................................................................................................................................... 53
12.2 Statistical Analysis of Assay Quality Control Data .................................................................... 54
12.2.1 Introduction ...................................................................................................... 54
12.2.2 Assay Accuracy .................................................................................................. 55
12.2.3 Assay Precision .................................................................................................. 69
12.3 Grid Control and Survey .......................................................................................................... 85
12.3.1 Introduction ...................................................................................................... 85
12.3.2 Survey Control Audit .......................................................................................... 85
12.3.3 Routine Surveying .............................................................................................. 86
12.3.4 Topography ....................................................................................................... 87
12.3.5 Drillhole Collar and Trench Locations ................................................................. 88
12.3.6 Downhole Surveying .......................................................................................... 89
12.4 Bulk Density ........................................................................................................................... 89
12.5 Verification Sampling .............................................................................................................. 90
12.5.1 Analysis of Twin Trench Sampling Data............................................................... 90
12.5.2 Analysis of Twin Core Hole Data ......................................................................... 92

Report Number: R135.2014 VI
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

12.5.3 Analysis of RC and Diamond Twin Hole Data....................................................... 92
12.6 Site Visit – Geology and Resources .......................................................................................... 95
12.6.1 Summary ........................................................................................................... 95
12.6.2 Conclusions and Recommendations ................................................................... 96
12.7 Site Visit – Mining ................................................................................................................... 97
13 Mineral Processing and Metallurgical Testing .......................................... 98
13.1 Introduction ........................................................................................................................... 98
13.2 Ore Characterisation – 2009 to 2013 ....................................................................................... 98
13.3 Gold Occurrence ..................................................................................................................... 99
13.4 Comminution ......................................................................................................................... 99
13.5 Flotation ............................................................................................................................... 100
13.6 Tailings ................................................................................................................................. 102
13.7 2012 Comminution and Flotation Circuit Design.................................................................... 102
14 Mineral Resource Estimates .................................................................. 103
14.1 RSG Database Development ................................................................................................. 103
14.1.1 Introduction .................................................................................................... 103
14.1.2 Validation of Supplied Database ....................................................................... 103
14.1.3 Vulcan Database Development ........................................................................ 104
14.2 RSG Geology and Mineralised Domain Modelling .................................................................. 105
14.2.1 Introduction .................................................................................................... 105
14.2.2 Lithology Boundaries ....................................................................................... 105
14.2.3 Oxidation/Weathering Boundaries ................................................................... 106
14.2.4 Mineralised Domain Boundaries ...................................................................... 106
14.3 Statistical Analysis ................................................................................................................ 112
14.3.1 Introduction .................................................................................................... 112
14.3.2 Data Coding ..................................................................................................... 113
14.3.3 Compositing .................................................................................................... 114
14.3.4 Statistical Analysis ............................................................................................ 114
14.4 Variography .......................................................................................................................... 124
14.4.1 Introduction .................................................................................................... 124
14.4.2 Upper Zones - Domain Group 10, 20, 30, 40 and 50 .......................................... 124
14.4.3 Wall Zone and Overburden .............................................................................. 128
14.5 Block Model Development .................................................................................................... 131
14.5.1 Introduction .................................................................................................... 131
14.5.2 Block Construction Parameters ........................................................................ 131
14.5.3 Block Model Validation .................................................................................... 132
14.5.4 Bulk Density Assignment .................................................................................. 132
14.6 Grade Estimation .................................................................................................................. 132
14.6.1 Introduction .................................................................................................... 132
14.6.2 Ordinary Kriging - Gold ..................................................................................... 133
14.6.3 Multiple Indicator Kriging - Gold....................................................................... 134
14.6.4 Silver Grade Estimates by Linear Regression ..................................................... 138
14.7 CSA Validations of the RSG Block Model................................................................................ 140
14.7.1 Wall Zone Swath Plots ..................................................................................... 140
14.7.2 Regularisation of the block model .................................................................... 142
14.7.3 Uniform Conditioning Check Estimate – Upper Zone Domains 10, 11 & 12........ 144
14.8 Mineral Resource Reporting ................................................................................................. 148
14.8.1 Introduction .................................................................................................... 148
14.8.2 Criteria for Mineral Resource Categorisation .................................................... 148
15 Mineral Reserve Estimates .................................................................... 150
16 Mining Methods .................................................................................... 152

Report Number: R135.2014 VII
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

16.1 Mine Design ......................................................................................................................... 152
16.2 Geotechnical Parameters ...................................................................................................... 153
16.3 Optimisation Parameters ...................................................................................................... 154
16.3.1 Mining and Processing Costs ............................................................................ 154
16.3.2 Selling cost....................................................................................................... 155
16.3.3 Metal Prices and Discount Rate ........................................................................ 155
16.3.4 Royalty ............................................................................................................ 155
16.3.5 Processing Parameters ..................................................................................... 155
16.3.6 Pit Shell Selection ............................................................................................ 156
16.4 Pit Design ............................................................................................................................. 156
16.5 Production Scheduling .......................................................................................................... 157
16.6 Mining Equipment ................................................................................................................ 159
16.7 Capital Expenditure .............................................................................................................. 159
16.8 Operating Cost ..................................................................................................................... 160
17 Recovery Methods................................................................................. 162
17.1 Recovery Methods and Process Design - Introduction ........................................................... 162
17.2 General Design Basis............................................................................................................. 162
17.2.1 Design Criteria Summary .................................................................................. 163
17.3 Grinding Circuit Development ............................................................................................... 164
17.4 Flotation Circuit Development and Design ............................................................................ 164
17.5 Process Description .............................................................................................................. 165
17.5.1 General Design Basis ........................................................................................ 165
18 Project Infrastructure ............................................................................ 168
18.1 Integrated Mine Waste Facility ............................................................................................. 168
18.1.1 Background and Site Selection ......................................................................... 168
18.1.2 General Description ......................................................................................... 168
18.1.3 Closure and Rehabilitation ............................................................................... 169
18.2 Water Management ............................................................................................................. 169
18.2.1 Water Supply ................................................................................................... 170
18.3 Communications................................................................................................................... 170
18.4 Access Road and In-plant Construction ................................................................................. 170
18.5 Effluent ................................................................................................................................ 170
18.6 Fuel Storage and Distribution................................................................................................ 171
18.7 Vehicle Washdown Facilities ................................................................................................. 171
18.8 Power Supply and Reticulation ............................................................................................. 171
18.9 Buildings............................................................................................................................... 171
18.10 Fire Protection ...................................................................................................................... 171
18.11 Security ................................................................................................................................ 172
18.12 Operations Administration.................................................................................................... 172
18.12.1 Recruitment of Personnel ................................................................................ 172
18.12.2 Manning .......................................................................................................... 172
19 Market Studies and Contracts ................................................................ 174
20 Environmental Studies, Permitting and Social/Community Impact ......... 175
20.1 Community Impacts, Including Air Quality............................................................................. 175
20.2 Surface Water ...................................................................................................................... 176
20.3 Groundwater ........................................................................................................................ 177
20.4 Soils and Land Use ................................................................................................................ 177
20.5 Wildlife................................................................................................................................. 177
20.6 Cultural Heritage .................................................................................................................. 178
20.7 Social Impacts....................................................................................................................... 178
20.8 Closure Plan and Rehabilitation ............................................................................................ 178

Report Number: R135.2014 VIII
Dundee Precious Metals Inc.
NI 43-101 Technical Report – Krumovgrad Project

20.9 Recommendations................................................................................................................ 179
21 Capital and Operating Costs ................................................................... 180
21.1 Capital Costs ......................................................................................................................... 180
21.2 Operating Cost Estimate ....................................................................................................... 182
22 Economic Analysis ................................................................................. 184
22.1 Assumptions ......................................................................................................................... 184
22.2 Currency, Escalation and Exchange Rates .............................................................................. 184
22.3 Taxation ............................................................................................................................... 184
22.4 Funding ................................................................................................................................ 184
22.5 Summary of Results .............................................................................................................. 185
22.6 Project Economics ................................................................................................................ 188
22.7 Sensitivity Analysis................................................................................................................ 188
23 Adjacent Properties ............................................................................... 189
24 Other Relevant Data and Information .................................................... 190
24.1 Company information ........................................................................................................... 190
24.2 Business Legislation .............................................................................................................. 190
24.3 Mining Legislation ................................................................................................................ 190
24.4 Taxation ............................................................................................................................... 190
24.5 Customs Duties..................................................................................................................... 191
24.6 Social Security/Health Insurance Contributions ..................................................................... 191
24.7 Foreign Investment............................................................................................................... 192
24.7.1 National Treatment.......................................................................................... 192
24.7.2 Most Favoured Nation Status ........................................................................... 192
24.7.3 Priority of International Treaties ...................................................................... 192
24.7.4 Guarantees against Adverse Changes of the Legislation .................................... 193
24.8 Land Ownership ................................................................................................................... 193
24.8.1 Legislative Framework ..................................................................................... 193
24.8.2 General Rules .................................................................................................. 193
24.9 Land Acquisition ................................................................................................................... 195
24.9.1 Introduction .................................................................................................... 195
24.9.2 Legal and Institutional Framework ................................................................... 195
24.9.3 Acquisition Strategy ......................................................................................... 196
24.9.4 Redesignation of Land for Project Implementation ........................................... 196
24.10 Project Implementation ........................................................................................................ 196
24.10.1 General............................................................................................................ 196
24.10.2 Mining ............................................................................................................. 197
24.10.3 Process Plant and Paste Plant........................................................................... 198
24.10.4 Integrated Mine Waste Facility ........................................................................ 200
24.10.5 Overall Project Schedule .................................................................................. 201
24.11 Risk Assessment ................................................................................................................... 201
24.11.1 Risk Review ...................................................................................................... 202
24.11.2 Project Objectives Considered.......................................................................... 202
24.11.3 Risk Assessment Outcomes .............................................................................. 203
24.12 Abbreviations ....................................................................................................................... 205
25 Interpretation and Conclusions .............................................................. 206
26 Recommendations................................................................................. 210
27 References ............................................................................................ 211

Report Number: R135.2014 IX