Methodology for the Digital Calibration of Analog Circuits and Systems: with Case Studies (The Springer International Series in Engineering and Computer Science)

269 Pages·2006·1.92 MB·English

by  Marc Pastre

METHODOLOGYFOR THE DIGITALCALIBRATION
OF ANALOG CIRCUITS AND SYSTEMS
METHODOLOGY
FOR THE DIGITAL
CALIBRATION OF ANALOG
CIRCUITS AND SYSTEMS
with Case Studies
by
Marc Pastre
Ecole Polytechnique Fédérale de Lausanne,
Switzerland
and
Maher Kayal
Ecole Polytechnique Fédérale de Lausanne,
Switzerland
AC.I.P. Catalogue record for this book is available from the Library of Congress.
ISBN-10 1-4020-4252-3 (HB)
ISBN-13 978-1-4020-4252-2 (HB)
ISBN-10 1-4020-4253-1 (e-book)
ISBN-13 978-1-4020-4253-9 (e-book)
Published by Springer,
P.O. Box 17, 3300 AADordrecht, The Netherlands.
www.springeronline.com
Printed on acid-free paper
All Rights Reserved
© 2006 Springer
No part of this work may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, microfilming, recording
or otherwise, without written permission from the Publisher, with the exception
of any material supplied specifically for the purpose of being entered
and executed on a computer system, for exclusive use by the purchaser of the work.
Printed in the Netherlands.
Contents
List of Figures xi
List of Tables xvii
1. INTRODUCTION 1
1 Context 1
2 Objectives 2
3 Compensation methodology 2
4 Applications of the compensation methodology 2
5 Book organization 3
2. AUTOCALIBRATION AND COMPENSATION TECHNIQUES 5
1 Introduction 5
2 Matching 5
2.1 Matching rules 6
2.2 Matching parameters 6
3 Chopper stabilization 7
3.1 Principle 7
3.2 Analysis 8
3.3 Implementation 9
4 Autozero 11
4.1 Principle 11
4.2 Analysis 12
4.3 Noise 14
5 Correlated double sampling 18
6 Ping-pong 18
7 Other techniques 20
vi Digital Calibration of Analog Circuits and Systems
8 Classification 21
9 Conclusion 22
3. DIGITAL COMPENSATION CIRCUITS AND SUB-BINARY DIGI-
TAL-TO-ANALOG CONVERTERS 23
1 Introduction 23
2 Digital compensation 23
3 Successive approximations 24
3.1 Principle 25
3.2 Working condition 28
3.3 Reverse successive approximations algorithm 29
3.4 Complexity 31
4 Sub-binary radix DACs 31
4.1 Use of sub-binary DACs for successive approximations 31
4.2 Characteristics 32
4.3 Resolution 34
4.4 Tolerance to radix variations 34
5 Component arrays 35
5.1 Sizing 36
6 Current sources 38
6.1 Current-mirror DAC 39
7 R/2R ladders 40
8 Linear current division using MOS transistors 41
8.1 Principle 41
8.2 Second-order effects 45
8.3 Parallel configuration 45
8.4 Series configuration 46
9 M/2M ladders 48
9.1 Principle 48
9.2 Complementary ladder 49
9.3 Second-order effects 50
9.4 Trimming 51
10 R/xR ladders 51
10.1 Principle 51
10.2 Working condition 53
10.3 Terminator calculation 54
10.4 Terminator implementation 55
10.5 Ladder sizing 57
10.6 Terminator sizing 58
Contents vii
10.7 Radix 60
11 M/2+M ladders 62
11.1 M/3M ladders 62
11.2 M/2.5M ladders 64
11.3 Ladder selection and other M/2+M ladders 65
11.4 Current collector design 67
11.5 Complementary ladders 72
11.6 Layout 72
11.7 Measurements 73
12 Comparison 77
13 Linear DACs based on M/2+M converters 78
13.1 Principle 78
13.2 Calibration algorithm 81
13.3 Radix conversion algorithm 84
13.4 Digital circuit implementation 85
13.5 Analog circuit implementation 87
13.6 Compensation of temperature variations 90
13.7 Comparison with other self-calibrated converters 90
14 Conclusion 91
4. METHODOLOGY FOR CURRENT-MODE DIGITAL COMPENSA-
TION OF ANALOG CIRCUITS 93
1 Introduction 93
2 Two-stage Miller operational amplifier 93
3 Compensation current technique 96
3.1 Detection configuration 97
3.2 Detection node 100
3.3 Compensation node 105
3.4 DAC resolution 113
3.5 Low-pass decision filtering 114
3.6 Continuous-time compensation 115
3.7 Up/down DAC 117
4 Simulation with digital compensation circuits 124
4.1 Principle 125
4.2 Automatic compensation component 126
4.3 Compensation component during adjustment 128
4.4 Compensation component during compensation 130
4.5 Multiple digital compensation 133
4.6 Example of implementation for PSpice 134
viii Digital Calibration of Analog Circuits and Systems
4.7 Offset compensation of the Miller amplifier 136
5 Application to SOI 1T DRAM calibration 138
5.1 1-transistor SOI memory cell 139
5.2 Memory cell imperfections 140
5.3 Sensing scheme 141
5.4 Calibration principle 144
5.5 Calibration algorithm 146
5.6 Measurements 147
6 Conclusion 148
5. HALL MICROSYSTEM WITH CONTINUOUS DIGITAL GAIN
CALIBRATION 151
1 Introduction 151
2 Integrated Hall sensors 151
2.1 Hall effect 152
2.2 Hall sensors 153
2.3 Hall sensor models 155
3 Spinning current technique 157
4 Sensitivity calibration of Hall sensors 160
4.1 Sensitivity drift of Hall sensors 161
4.2 Integrated reference coils 162
4.3 Sensitivity calibration 163
4.4 State of the art 166
5 Hall sensor microsystems 171
5.1 Analog front-ends for current measurement 171
6 Continuous digital gain calibration technique 173
6.1 Principle 173
6.2 Combined modulation scheme 175
6.3 Demodulation schemes 176
6.4 Gain compensation 179
6.5 Offset compensation 183
6.6 Noise filtering 184
6.7 Delta-sigma analog-to-digital converter 189
6.8 Rejection of signal interferences 193
7 Conclusion 197
6. IMPLEMENTATION OF THE HALL MICROSYSTEM WITH CON-
TINUOUS CALIBRATION 199
1 Introduction 199
Contents ix
2 Hall sensor array 199
3 Preamplifier 201
3.1 Programmable gain range preamplifier 201
3.2 DDA 202
3.3 Operational amplifier 207
4 Demodulators 208
4.1 Switched-capacitor integrators 209
4.2 External signal demodulator 213
4.3 Reference demodulator 216
4.4 Offset demodulator 220
5 Delta-sigma modulator 221
6 System improvements 224
6.1 Compensation of the reference demodulator offset 224
6.2 Coil-sensor capacitive coupling 225
6.3 External interferences 226
6.4 Alternate modulation/demodulation schemes 227
7 System integration 230
7.1 Configuration and measurement possibilities 230
7.2 Integrated circuit 231
7.3 Measurement results 233
8 Conclusion 240
7. CONCLUSION 241
1 Highlights 241
2 Main contributions 242
3 Perspectives 242
References 245
Index 255
List of Figures
Figure 1. Functional chopper amplifier 7
Figure 2. Temporal analysis of a chopper amplifier 8
Figure 3. Frequency analysis of a chopper amplifier 8
Figure 4. Fully differential chopper amplifier 9
Figure 5. Implementation of a modulator/demodulator using
cross-coupled switches 10
Figure 6. CMOS transmission gate 10
Figure 7. Demodulator for single output chopper amplifier 11
Figure 8. Autozero amplifier principle 12
Figure 9. Analogically compensated autozero amplifier 13
Figure 10. Digitally compensated autozero amplifier 13
Figure 11. Autozero baseband and foldover noise transfer functions 15
Figure 12. Resulting noise with autozero and small
amplifier bandwidth 16
Figure 13. Resulting noise with autozero and large
amplifier bandwidth 17
Figure 14. Effect of the 1/f corner frequency on the resulting noise 18
Figure 15. Ping-pong amplifier system 19
Figure 16. Operational amplifier swapping 20
Figure 17. Digital compensation of the offset of an operational
amplifier 24
Figure 18. Ideal 4-bits DAC input/output characteristics 25
Figure 19. Equivalent offset 26
xi