Mechanical properties and processing of ceramic binary, ternary, and composite systems : a collection of papers presented at the 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008, Daytona Beach, Florida

203 Pages·2009·13.726 MB·English

by  J A Salem, Greg Hilmas, William Fahrenholtz, T Ohji, Andrew Wereszczak

Mechanical Properties and
Processing of Ceramic
Binary, Ternary, and
Composite Systems
A Collection of Papers Presented at the
32nd International Conference on Advanced
Ceramics and Composites
January 27-February 7,2008
Daytona Beach, Florida
Editors
Jonathan Salem
Greg Hilmas
William Fahrenh olt z
Volume Editors
Tatsuki Ohji
Andrew Wereszczak
WILEY
A John Wiley & Sons, Inc., Publication
This Page Intentionally Left Blank
Mechanical Properties and
Processing of Ceramic
Binary, Ternary, and
Composite Systems
This Page Intentionally Left Blank
Mechanical Properties and
Processing of Ceramic
Binary, Ternary, and
Composite Systems
A Collection of Papers Presented at the
32nd International Conference on Advanced
Ceramics and Composites
January 27-February 7,2008
Daytona Beach, Florida
Editors
Jonathan Salem
Greg Hilmas
William Fahrenh olt z
Volume Editors
Tatsuki Ohji
Andrew Wereszczak
WILEY
A John Wiley & Sons, Inc., Publication
Copyright 02 009 by The American Ceramic Society. All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the I976 United States Copyright Act, without either the prior
written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to
the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, [phone], fax
[phone], or on the web at www.copyright.com. Requests to the Publisher for permission should
be addressed to the Permissions Department, John Wiley & Sons, Inc., 11 1 River Street, Hoboken, NJ
07030, (201) 748-601 1, fax [phone], or online at http://www.wiley.com/go/permission.
Limit of LiabilityiDisclaimer of Warranty: While the publisher and author have used their best efforts in
preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of
merchantability or fitness for a particular purpose. No warranty may be created or extended by sales
representatives or written sales materials. The advice and strategies contained herein may not be
suitable for your situation. You should consult with a professional where appropriate. Neither the
publisher nor author shall be liable for any loss of profit or any other commercial damages, including
but not limited to special, incidental, consequential, or other damages.
For general information on our other products and services or for technical support, please contact our
Customer Care Department within the United States at [phone], outside the United States at
[phone] or fax [phone].
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may
not be available in electronic format. For information about Wiley products, visit our web site at
www.wiley.com.
Library of Congress Cataloging-in-Publication Data is available.
ISBN 978-0-470-34492-7
Printed in the United States of America.
I09 8 7 6 5 4 3 2 1
Contents
Preface vii
Introduction ix
BINARY AND TERNARY CERAMICS
Synthesis and Phase Development in the Cr-AI-N System 3
M-L. Antti, Y-B. Cheng, and M. OdBn
Phase Evolution and Properties of Ti2AIN Based Materials, 13
Obtained by SHS Method
L. Chlubny, J. Lis, and M.M. BuCko
Synthesis of Ti,SiC2 by Reaction of TIC and Si Powders 21
Ida Kero, Marta-Lena Antti, and Magnus Od6n
Toughening of a ZrC Particle-Reinforced Ti3AIC2C omposite 31
G.M. Song, Q.Xu, W.G. Sloof, S.B. Li, and S. van der Zwaag
Microstructure and Properties of the Cermets Based on Ti(C,N) 41
S.Q. Zhou, W. Zhao, W.H. Xiong
Scratch-Induced Deformation and Residual Stress in a Zirconium 51
Diboride-Silicon Carbide Composite
Dipankar Ghosh, Ghatu Subhash, and Nina Orlovskaya
Finite Element Modeling of Internal Stress Factors for ZrB2-Sic 65
Ceramics
Michael P. Teague, Gregory E. Hilmas, and William G. Fahrenholtz
V
Effects of Microstructural Anisotropy on Fracture Behavior of 77
Heat-Pressed Glass-Ceramics and Glass-Infiltrated Alumina
Composites for Dental Restorations
Humberto N. Yoshimura, Carla C. Gonzaga, Paulo F. Cesar, and
Walter G. Miranda, Jr.
SILICON CARBIDE, CARBON AND OXIDE BASED COMPOSITES
Mechanical Properties of Hi-NICALON S and SA3 Fiber Reinforced 91
SiC/SiC Minicomposites
C. Sauder, A. Brusson, and J. Lamon
The Effect of Holes on the Residual Strength of SiC/SiC Ceramic 101
Composites
G. Ojard, Y. Gowayed, U. Santhosh, J. Ahmad, R. Miller, and R. John
Through Thickness Modulus (E33) of Ceramic Matrix Composites: 109
Mechanical Test Method Confirmation
G. Ojard, T. Barnett, A. Calomino, Y. Gowayed, U. Santhosh, J. Ahmaad,
R. Miller. and R. John
The Effects of Si Content and Sic Polytype on the Microstructure 115
and Properties of RBSC
A.L. Marshall, P. Chhillar, P. Karandikar, A. McCorrnick, and M.K. Aghajanian
In-Situ Reaction Sintering of Porous Mullite-Bonded Silicon Carbide, 127
Its Mechanical Behavior and High Temperature Applications
Neelkanth Bardhan and Parag Bhargava
Study on Elasto-Plastic Behavior of Different Carbon Types in 141
Carbon/Carbon Composites
Soydan Ozcan, Jale Tezcan, Jane Y. Howe, and Peter Filip
Effects of Temperature and Steam Environment on Creep Behavior 151
of an Oxide-Oxide Ceramic Composite
J.C. Braun and M.B. Ruggles-Wrenn
Characterization of Foreign Object Damage in an Oxide/Oxide 167
Composite at Ambient Temperature
Sung R. Choi and Donald J. Alexander
Processing and Properties of Fiber Reinforced Barium 179
Aluminosilicate Composites for High Temperature Radomes
Richard Cass, Geoffrey Eadon, and Paul Wentzel
Author Index 189
vi Mechanical Properties and Processing of Ceramic Systems
Preface
This volume contains papers presented in the Mechanical Behavior and Structural
Design of Monolithic and Composite Ceramics symposium of the 32nd Internation-
al Conference & Exposition on Advanced Ceramics & Composites held on January
27-February 1,2008 at Daytona Beach, Florida.
This volume emphasizes the processing and properties of binary, ternary and
composite systems, which are being developed to broaden the application of ceram-
ic in structural systems. It is a continuation in the development of a forum for the
discussion of recent developments and applications of binary, ternary, and compos-
ite systems.
The papers presented at the symposium represented research from 20 countries
and demonstrate the worldwide interest in the processing and properties of complex
ceramic systems. The organization of the symposium and the publication of this
proceeding were possible thanks to the professional staff of The American Ceramic
Society and the tireless dedication of many Engineering Ceramics Division mem-
bers. We would especially like to express our sincere thanks to the symposia orga-
nizers, session chairs, presenters and conference attendees, for their efforts and en-
thusiastic participation in the vibrant and cutting-edge symposium.
Jonathan Salem
NASA Glenn Research Center
Greg Hilmas
Missouri University of Science and Technology
William Fahrenholtz
Missouri University of Science and Technology
vii