Table Of ContentMachining of
Nanocomposites
Machining of
Nanocomposites
Ramesh Kumar Nayak
Mohan Kumar Pradhan
Ashok Kumar Sahoo
First edition published 2022
by CRC Press
6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 3 3487-2742
and by CRC Press
2 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN
2022 Ramesh Kumar Nayak, Mohan Kumar Pradhan and Ashok Kumar Sahoo
CRC Press is an imprint of Taylor & Francis Group, LLC
Reasonable eforts have been made to publish reliable data and information, but the author and pub-
lisher cannot assume responsibility for the validity of all materials or the consequences of their use.
Te authors and publishers have attempted to trace the copyright holders of all material reproduced
in this publication and apologize to copyright holders if permission to publish in this form has not
been obtained. If any copyright material has not been acknowledged please write and let us know so
we may rectify in any future reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced,
transmitted, or utilized in any form by any electronic, mechanical, or other means, now known
or hereafter invented, including photocopying, microflming, and recording, or in any information
storage or retrieval system, without written permission from the publishers.
For permission to photocopy or use material electronically from this work, access www.copyright.
com or contact the Copyright Clearance Center, Inc. ( CCC), 222 Rosewood Drive, Danvers, MA
01923, 9 78-7 50-8400. For works that are not available on CCC please contact mpkbookspermis-
[email protected]
Trademark notice: Product or corporate names may be trademarks or registered trademarks and are
used only for identifcation and explanation without intent to infringe.
ISBN: 9780367620592 ( hbk)
ISBN: 9780367620615 ( pbk)
ISBN: 9781003107743 (e bk)
DOI: 10.1201/9 781003107743
Typeset in Times
by codeMantra
Contents
Preface......................................................................................................................vii
Acknowledgments .....................................................................................................ix
Authors ......................................................................................................................xi
Chapter 1 Introduction to Nanocomposites and Machining .................................1
Chapter 2 Conventional Machining of Nanocomposites .................................... 31
Chapter 3 Advanced Machining of Nanocomposites .........................................59
Chapter 4 Intelligent Machining of Nanocomposites .........................................93
Chapter 5 Sustainable Machining of Nanocomposites .....................................157
Index ...................................................................................................................... 191
v
Preface
In recent years, the application of composite materials has been increasing in vari-
ous areas of science and technology due to their unique properties, namely, for use
in aircraft, automotive, defense, aerospace, and other advanced industries. The
use of nanocomposites for different engineering applications has been increasing
day by day. Machining of composite/ nanocomposite materials is quite a complex
task due to its heterogeneity, and the reinforcements are highly abrasive. This book
covers the development of nanocomposite materials and a wide range of conven-
tional and nonconventional machining processes of various composite materials,
including polymer and m etallic-based composites and nanostructured composites.
The machining of polymer matrix composites/ nanocomposites is an indispensable
reference/ sourcebook for composite manufacturing process design, tool, and produc-
tion engineers. The book also focuses on intelligent and sustainable machining of
nanocomposites. It can also beneft fnal-year undergraduate and postgraduate stu-
dents as it provides comprehensive information on the machining of composite and
nanocomposite materials to produce h igh-quality fnal components. It can also serve
as a valuable reference work for academics, manufacturing and materials research-
ers, manufacturing and mechanical engineers, and professionals in composite tech-
nology and related industries.
vii
Acknowledgments
The authors take this opportunity to thank Maulana Azad National Institute of
Technology, Bhopal, India, an Institute of National Importance, and Kalinga Institute
of Industrial Technology (KIIT), deemed to be University, Bhubaneswar, India, an
Institution of Eminence’ (IoE) for their constant support, motivation, and encourage-
ment in accomplishing the current work. The authors are also thankful to the review-
ers, editorial advisory board members, development editor, and CRC Press staff for
their time and effort on this project. All of their efforts were crucial in producing this
book, and we could not have accomplished this milestone without their constant and
consistent advice, support, and collaboration, especially in this C OVID-19 pandemic
scenario. Finally, we wish to express our deep gratitude to our parents, who always
stood by us throughout our lives and guided us in the time of crisis. This project
could not be completed without our wives and children’s moral support, patience,
and encouragement. We express our gratitude to everyone who took the time to assist
us in preparing this book. Above all, we bow to the almighty, whose blessings and
knowledge have guided and assisted us not only in the course of this project but
throughout our lives.
ix
