Table Of ContentJoint Replacement Technology
Related titles:
Computational modelling of biomechanics and biotribology in the musculoskeletal
system
(ISBN 978-0-85709-661-6)
Wear of orthopaedic implants and artificial joints
(ISBN 978-0-85709-128-4)
The hip resurfacing handbook
(ISBN 978-1-84569-948-2)
Woodhead Publishing Series in Biomaterials: Number 80
Joint Replacement
Technology
Second Edition
Edited by
P. A. Revell
amsterdam • boston • cambridge • heidelberg • london
new york • oxford • paris • san diego
san francisco • singapore • sydney • tokyo
Woodhead Publishing is an imprint of Elsevier
Woodhead Publishing is an imprint of Elsevier
80 High Street, Sawston, Cambridge, CB22 3HJ, UK
225 Wyman Street, Waltham, MA 02451, USA
Langford Lane, Kidlington, OX5 1GB, UK
First edition published 2008, Woodhead Publishing Limited
Second edition 2014, Woodhead Publishing Limited
Copyright © 2014 Elsevier Ltd. All rights reserved
No part of this publication may be reproduced, stored in a retrieval system or transmitted
in any form or by any means electronic, mechanical, photocopying, recording or otherwise
without the prior written permission of the publisher.
Permissions may be sought directly from Elsevier’s Science & Technology Rights
Department in Oxford, UK: phone (+44) (0) 1865 843830; fax (+44) (0) 1865 853333;
email: [email protected]. Alternatively you can submit your request online by
visiting the Elsevier website at http://elsevier.com/locate/permissions, and selecting
Obtaining permission to use Elsevier material.
Notice
No responsibility is assumed by the publisher for any injury and/or damage to persons or
property as a matter of products liability, negligence or otherwise, or from any use or
operation of any methods, products, instructions or ideas contained in the material herein.
Because of rapid advances in the medical sciences, in particular, independent verification
of diagnoses and drug dosages should be made.
British Library Cataloguing-in-Publication Data
A catalogue record for this book is available from the British Library
Library of Congress Control Number: 2014936943
ISBN 978-0-85709-841-2 (print)
ISBN 978-0-85709-847-4 (online)
For information on all Woodhead Publishing publications
visit our website at http://store.elsevier.com/
Typeset by Replika Press Pvt Ltd, India
Printed and bound in the United Kingdom
Contributor contact details
(* = main contact)
Editor and Chapters 9 Institute of Medical and Biological
and 10 Engineering
School of Mechanical Engineering
P. A. Revell
University of Leeds
High Ridge
Leeds, LS2 9JT, UK
7 Exmouth Road
Budleigh Salterton E-mail: [email protected]
Devon EX9 6AF, UK
J. Fisher
E-mail: [email protected] Institute of Medical and Biological
Engineering
Chapter 1 School of Mechanical Engineering
University of Leeds
G. Johnson Leeds, LS2 9JT, UK
School of Mechanical and Systems
Engineering
Chapter 3
Stephenson Building
Newcastle University A. Nair, D. W. Baker and L. Tang*
Newcastle-upon-Tyne NE1 7RU, Box 19138
UK University of Texas at Arlington
Arlington, TX 76019-0138, USA
E-mail: [email protected]
E-mail: [email protected]
Chapter 2
Z. Jin*
State Key Laboratory for
Manufacturing System
Engineering
Xi’an Jiaotong University
Xi’an, China
and
xiv Contributor contact details
Chapter 4 T. Sillat
Department of Medicine
Y. T. Konttinen*
Institute of Clinical Medicine
Department of Medicine
University of Helsinki and Helsinki
Institute of Clinical Medicine
University Central Hospital
University of Helsinki and Helsinki
Haartmaninkatu 8 (Biomedicum
University Central Hospital
Helsinki 1)
Haartmaninkatu 8 (Biomedicum
FI-00029 HUS, Helsinki, Finland
Helsinki 1)
FI-00029 HUS, Helsinki, Finland
S. Virtanen
University of Erlangen-Nuremberg
and
Erlangen, Germany
ORTON Orthopaedic Hospital of
V-M. Tiainen
the Invalid Foundation
Anders Langenskiöld Research
Helsinki, Finland
Laboratory
ORTON Orthopaedic Hospital of
and
the Invalid Foundation
Helsinki, Finland
COXA Hospital for Joint
Replacement
Tampere, Finland
Chapter 5
E-mail: [email protected]
D. Kluess,* P. Bergschmidt, W.
Mittelmeier and R. Bader
I. Milošev
Department of Orthopaedics
Jožef Stefan Institute
University Medicine Rostock
Department of Physical and
D-18057, Rostock, Germany
Organic Chemistry
Slovenia
E-mail: [email protected].
de
and
Chapter 6
Orthopaedic Hospital Valdoltra
Ankaran, Slovenia
R. Lappalainen,* T. Juvonen and
M. Selenius
R. Trebše
University of Eastern Finland
Orthopaedic Hospital Valdoltra
Department of Applied Physics
Ankaran, Slovenia
PO Box 1627
70211 Kuopio, Finland
R. van der Linden and J. Pieper
Signifix B.V.
E-mail: [email protected]
Utrecht, Netherlands
Contributor contact details xv
Chapter 7 Chapter 12
M. J. Cross,* G. J. Roger and J. D. Dowson* and A. Neville
Spycher School of Mechanical Engineering
The Australian Institute of The University of Leeds
Musculoskeletal Research Leeds LS2 9JT, UK
Australia
E-mail: [email protected].,
E-mail: [email protected] [email protected]
Chapter 8 Chapter 13
N. Dunne* and J. Clements R. Botchu and S. L. James
School of Mechanical and Department of Musculoskeletal
Aerospace Engineering Radiology
Queen’s University of Belfast The Royal Orthopaedic Hospital
Belfast, UK Birmingham
The Woodlands
E-mail: [email protected] Bristol Road South
Birmingham B31 2AP, UK
J-S. Wang
Department of Orthopaedics E-mail: [email protected]
Clinical Sciences
Lund University
Chapter 14
Lund, Sweden
M. Revell
The Royal Orthopaedic Hospital
Chapter 11
Birmingham
S. Sivananthan and S. Goodman* The Woodlands
Department of Orthopaedic Surgery Bristol Road South
and Bioengineering Birmingham B31 2AP, UK
Stanford University Medical Center
Outpatient Center E-mail: [email protected]
450 Broadway Street, M/C 6342
Redwood City, CA 94063, USA
Chapter 15
E-mail: [email protected] J. Blaha
University of Michigan Medical
School
M4101 Medical Science Building
1301 Catherine
Ann Arbor, MI 48109-5624, USA
E-mail: [email protected]
xvi Contributor contact details
Chapter 16 Chapter 19
N. J. Hallab* M. Ross*, C. James and G.
Department of Orthopedic Surgery Couzens
Rush University Medical Center Brisbane Hand and Upper Limb
1735 West Harrison Street Research Institute
Chicago, IL 60612, USA Brisbane, Australia
E-mail: [email protected] E-mail: [email protected]
V. Singh J. Klawitter
Medtronic, Inc. – Spinal and Integra Life Sciences
Biologies Austin, TX, USA
2600 Sofamor Danek Drive
Memphis, TN38132, USA
E-mail: [email protected]
Chapter 17
L. De Wilde* and A. Van Tongel
University Hospital of Ghent
Belgium
E-mail: [email protected],
[email protected]
Chapter 18
J. G. Aronowitz and J. Sanchez-
Sotelo*
Department of Orthopedic Surgery
Mayo Clinic
Rochester, MN 55905, USA
E-mail: SanchezSotelo.Joaquin@mayo.
edu
Woodhead Publishing Series in Biomaterials
1 Sterilisation of tissues using ionising radiations
Edited by J. F. Kennedy, G. O. Phillips and P. A. Williams
2 Surfaces and interfaces for biomaterials
Edited by P. Vadgama
3 Molecular interfacial phenomena of polymers and biopolymers
Edited by C. Chen
4 Biomaterials, artificial organs and tissue engineering
Edited by L. Hench and J. Jones
5 Medical modelling
R. Bibb
6 Artificial cells, cell engineering and therapy
Edited by S. Prakash
7 Biomedical polymers
Edited by M. Jenkins
8 Tissue engineering using ceramics and polymers
Edited by A. R. Boccaccini and J. Gough
9 Bioceramics and their clinical applications
Edited by T. Kokubo
10 Dental biomaterials
Edited by R. V. Curtis and T. F. Watson
11 Joint replacement technology
Edited by P. A. Revell
12 Natural-based polymers for biomedical applications
Edited by R. L. Reiss et al
13 Degradation rate of bioresorbable materials
Edited by F. J. Buchanan
xviii Woodhead Publishing Series in Biomaterials
14 Orthopaedic bone cements
Edited by S. Deb
15 Shape memory alloys for biomedical applications
Edited by T. Yoneyama and S. Miyazaki
16 Cellular response to biomaterials
Edited by L. Di Silvio
17 Biomaterials for treating skin loss
Edited by D. P. Orgill and C. Blanco
18 Biomaterials and tissue engineering in urology
Edited by J. Denstedt and A. Atala
19 Materials science for dentistry
B. W. Darvell
20 Bone repair biomaterials
Edited by J. A. Planell, S. M. Best, D. Lacroix and A. Merolli
21 Biomedical composites
Edited by L. Ambrosio
22 Drug–device combination products
Edited by A. Lewis
23 Biomaterials and regenerative medicine in ophthalmology
Edited by T. V. Chirila
24 Regenerative medicine and biomaterials for the repair of connective
tissues
Edited by C. Archer and J. Ralphs
25 Metals for biomedical devices
Edited by M. Ninomi
26 Biointegration of medical implant materials: Science and design
Edited by C. P. Sharma
27 Biomaterials and devices for the circulatory system
Edited by T. Gourlay and R. Black
28 Surface modification of biomaterials: Methods analysis and
applications
Edited by R. Williams
29 Biomaterials for artificial organs
Edited by M. Lysaght and T. Webster
30 Injectable biomaterials: Science and applications
Edited by B. Vernon
