Jewelry to Crochet: 7 Fabulous Sets Crocheted Using Sizes 3, 5 and 10 Crochet Cotton

26 Pages·2016·10.27 MB·English

by  Lowman Susan.

Crochet
Jewelr y

to Crochet

TM
susan lowman
7
Fabulous
sets
crocheted
using sizes
3, 5 and
10 crochet
cotton
871378
Jewelry

to Crochet

TM
Contents
2 Tri-Color Metallic
5 Beaded Copper Compass
8 Vintage Chic
11 Stained Glass
14 Lariat Necklace
17 Tie-Dyed Oval
19 Daisy Bouquet
22 Stitch Guide
23 Metric Conversions
2
Tri-Color
Metallic
SKILL LEVEL NEcKLAcE
STRAND
Make 1 with eaCh Color.
Ch 130, sl st in back bar (see illustration) of 2nd
FINISHED SIZES ch from hook and in back bar of each rem ch
Necklace: 1/2 inch wide x 18 inches long, not across. Fasten off, leaving a long tail. (129 sl sts)
including clasp
Bracelet: 1 inch wide x 81/4 inches long, not
including clasp
Earrings: 11/4 inches in diameter, not including
earring wire
Back Bar of Chain
MATERIALS FINISHING
■ Aunt Lydia’s Fashion Crochet Sew one end of all 3 Strands together. Carefully
Metallics size 5 crochet cotton braid Strands so bottom ends come out even.
(100 yds per ball): Sew other end of Strands together. Sew ends of
20 yds each #12s black/silver (A), #90g braid to necklace barrel clasp.
gold/gold (B) and #410s silver/silver (C)
■ Size D/3/3.25mm crochet hook or size
needed to obtain gauge BRAcELET
■ Necklace barrel clasp STRAND
■ 2 snaps Make 2 with eaCh Color.
■ 1 pair earring wires Ch 55, sl st in back bar (see illustration) of 2nd
■ Tapestry needle ch from hook and in back bar of each rem ch
■ Sewing needle across. Fasten off, leaving a long tail. (54 sl sts)
■ Black sewing thread
EDGING
GAUGE row 1 (rS): Join A with sc in end of 1 A Strand,
6 sts = 1 inch sc in end of 1 B Strand, sc in end of each of 2 C
Gauge is not important for these projects. Strands, sc in end of 2nd B Strand, sc in end of
2nd A Strand, turn. (6 sc)
PATTERN NOTES
Weave in ends as work progresses. rows 2 & 3: Ch 1, sc in each sc across, turn. At
end of last row, fasten off.
Join with slip stitch as indicated unless otherwise
stated. FINISHING
Referring to diagram, carefully braid Strands
so bottom ends come out even. Using A, rep
edging at other end of Strands in whatever
color order braided Strands end up. Sew snaps
to Edging on either end of braid.

4
Tri-Color Metallic
6-Strand Braiding Diagram
EARRING
Make 2.
STRAND
Make 1 with eaCh Color.
Ch 20, sl st in back bar (see illustration) of 2nd
ch from hook and in back bar of each rem ch
across. Fasten off, leaving a long tail. (19 sl sts)
Back Bar of Chain
FINISHING
Tie tails of all 3 Strands together. Carefully braid
Strands so bottom ends come out even. Sew
ends of strands together into a circle. Sew edge
of braided circle seam to bottom loop of earring
wire. ■
5
Beaded Copper
Compass
SKILL LEVEL NEcKLAcE
row 1 (rS): Leaving 9-inch tail, ch 178, working
in back bar (see illustration on page 6) of chs, sc
in 2nd ch from hook and in each of next 8 chs,
FINISHED SIZE picot (see Special Stitches), [sc in each of next 8
Necklace: 3/4 inch wide x 171/2 inches long, not chs, picot] 9 times, sc in each of next 6 chs, sc
including clasp dec (see Stitch Guide) in next 3 chs, sc in each
Bracelet: 3/4 inch wide x 61/2 inches long, not
including clasp
Earrings: 11/4 inches wide x 21/4 inches long, not
including earring wire
MATERIALS
■ Aunt Lydia’s Classic Crochet, size 10
crochet cotton (350 yds per ball):
50 yds #12 black
■ Size 7/1.65mm steel crochet hook or size
needed to obtain gauge
■ Size 6 #G16221 Mill Hill glass beads: 2 beads
for necklace, 2 beads for earrings
■ Size 8 #G18221 Mill Hill glass beads:
20 beads for necklace, 11 beads for bracelet
■ Necklace barrel clasp
■ Bracelet toggle clasp
■ 1 pair earring wires
■ Tapestry needle
GAUGE
3 shells = 21/2 inches; rows 1 & 2 = 3/4 inch
PATTERN NOTE
Weave in ends as work progresses.
SPEcIAL STITcHES
Picot: Ch 3, sl st in top of last st made.
Shell: (Tr, ch 2, tr, picot, ch 2, tr) in indicated st.
Large shell: (Tr, picot, ch 2, tr, ch 2, tr, picot, ch 2,
tr, ch 2, tr, picot) in indicated st.
Small shell: (Dc, ch 1, dc, picot, ch 1, dc) in
indicated st.

7
of next 7 chs, [picot, sc in each of next 8 chs] 10 BRAcELET
times, ch 1, working in unused lps on opposite row 1 (rS): Ch 68, working in back bar (see
side of foundation ch, sl st in each of first 5 chs, illustration) of chs, sc in 2nd ch from hook and
*ch 2, sk next 3 chs, shell (see Special Stitches) in in each rem ch across, ch 1, working in unused
next ch, ch 2, sk next 3 chs, sl st in next ch, rep lps on opposite side of foundation ch, sl st in
from * 9 times, ch 2, sk next 3 chs, large shell first ch, *ch 1, sk next 2 chs, small shell (see
(see Special Stitches) in next ch, ch 2, sk next Special Stitches) in next ch, ch 1, sk next 2 chs,
3 chs, sl st in next ch, **ch 2, sk next 3 chs, shell sl st in next ch, rep from * across. Do not turn.
in next ch, ch 2, sk next 3 chs, sl st in next ch, (11 small shells)
rep from ** 9 times, sl st in each of last 5 chs.
Fasten off, leaving a 24-inch tail. (1 large shell, row 2: Ch 1, working in sc at beg of row 1, sl st
20 shells) in first sc, *ch 1, sk next 2 sc, small shell in next
sc, ch 1, sk next 2 sc, sl st in next sc, rep from *
across, ch 1, sl st in next sl st. Fasten off, leaving
an 18-inch tail. (11 small shells)
FINISHING
Back Bar of Chain
On WS of Bracelet, weave tail through center,
PENDANT adding a small bead to RS at center of each
row 1 (rS): Ch 10, sc in back bar of 2nd ch from shell. Sew ends of Bracelet to bracelet toggle
hook and in back bar of each rem ch across, clasp. Wash and block if desired.
ch 1, working in unused lps on opposite side of
foundation ch, sl st in first ch, ch 2, sk next 3
chs, shell in next ch, ch 2, sk next 3 chs, sl st in EARRING
last ch, sc in sk ch at beg of row 1, picot. Do not Make 2.
turn. (1 shell) row 1: Rep row 1 of Pendant.
row 2: Working in sc at beg of row 1, sl st in row 2: Working in sc at beg of row 1, sl st in
first sc, ch 2, sk next 3 sc, shell in next sc, first sc, ch 2, sk next 3 sc, shell in next sc, ch 2,
ch 2, sk next 3 sc, sl st in last sc, ch 1, remove sk next 3 sc, sl st in last sc, sl st in next ch-1 sp,
lp from hook, insert hook from front to back ch 9, remove lp from hook, insert lp in bottom
in center picot on large shell of Necklace and loop of earring wire, insert hook in lp, sl st in
pull dropped lp through picot, sl st in next sl st. 2nd ch from hook and in each of next 7 chs, sl st
Fasten off, leaving a 9-inch tail. (1 shell) in next sl st. Fasten off, leaving a 6-inch tail.
FINISHING FINISHING
On WS of Necklace, weave tail through sc of On WS, weave tails to center of Earrings and add
row 1, adding a small bead to RS at center of a large bead to RS of each.
each shell and larger bead to RS at center of
large shell. Secure end. Sew ends of Necklace to Wash and block if desired. ■
necklace barrel clasp.
On WS of Pendant, weave tail to center and add a
large bead to RS.
Wash and block if desired.
8
V intage
Chic
SKILL LEVEL NEcKLAcE
row 1 (wS): With A, ch 4, (dc, ch 1, 2 dc) in 4th
ch from hook (beg 3 sk chs count as a dc), turn.
(4 dc, 1 ch-1 sp)
FINISHED SIZE
Necklace: 11/4 inches wide x 18 inches long, not row 2 (rS): Ch 5, dc in each of first 2 dc, ch 1, dc
including clasp in each of last 2 dc, turn. (4 dc, 1 ch-5 sp, 1 ch-1 sp)
Bracelet: 13/4 inches wide x 71/2 inches long, not
including clasp row 3: Ch 2 (see Pattern Notes), dc in next dc,
ch 1, dc in each of last 2 dc, turn.
MATERIALS
■ Aunt Lydia’s Fashion Crochet size 3 rows 4–49: [Rep rows 2 and 3 alternately]
crochet cotton (150 yds per ball): 23 times.
30 yds #12 black (A)
■ Aunt Lydia’s Fashion Crochet Metallics row 50: Rep row 2.
size 5 crochet cotton (100 yds per ball):
10 yds #90g gold/gold (B) row 51: Ch 2, dc dec (see Stitch Guide) in next
■ Size D/3/3.25mm crochet hook or size 3 sts. Fasten off. (2 dc)
needed to obtain gauge
■ Mill Hill #G05557 glass pebble beads: EDGING
13 beads Note: String gold beads on A.
■ Necklace barrel clasp
■ Bracelet toggle clasp With RS facing, join (see Pattern Notes) A in
■ Tapestry needle right-hand end of row 1, ch 1, working across
long side in ends of rows, [6 sc in next ch-5 sp,
GAUGE sc in next row] 10 times, 7 sc in next ch-5 sp, *sc
4 dc and ch-1 sp = 3/4 inch; 6 dc rows = 2 inches in next row, 3 sc in next ch-5 sp, turn.
PATTERN NOTES Note: Remainder of Edging is worked in steps.
Weave in ends as work progresses.
Chain-2 at beginning of row counts as a double A. Ch 6, sk first 7 sc, sl st in next sc, turn;
crochet unless otherwise stated.
Join with slip stitch as indicated unless otherwise B. [sc, fbsc (see Special Stitch), 2 sc, fbsc,
stated. 2 sc, fbsc, sc) in ch-6 sp, 4 sc in same ch-5 sp
as beg 3 sc made*;
SPEcIAL STITcH
Front bead single crochet (fbsc): Slide bead up to C. sc in next row, 7 sc in next ch-5 sp, sc in next
hook, pull up a lp in indicated st or sp, yo and row, 3 sc in next ch-5 sp, turn;
draw through 2 lps on hook.
D. ch 3, sk first 5 sc, tr in next sc, [ch 3, sk next
sc, tr in next sc] twice, ch 3, sk next
5 sc, sl st in next sc, turn;