Introduction to Fluid Mechanics, Fourth Edition

738 Pages·2010·9.829 MB·English

by  Janna, William S

Introduction to
Fluid
Mechanics
FOURTH EDITION
This page intentionally left blank
Introduction to
Fluid
Mechanics
FOURTH EDITION
William S. Janna
University of Memphis
Memphis, Tennessee, U.S.A.
Boca Raton London New York
CRC Press is an imprint of the
Taylor & Francis Group, an informa business
CRC Press
Taylor & Francis Group
6000 Broken Sound Parkway NW, Suite 300
Boca Raton, FL 33487-2742
© 2010 by Taylor and Francis Group, LLC
CRC Press is an imprint of Taylor & Francis Group, an Informa business
No claim to original U.S. Government works
Printed in the United States of America on acid-free paper
10 9 8 7 6 5 4 3 2 1
International Standard Book Number: 978-1-4200-8524-2 (Hardback)
This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been
made to publish reliable data and information, but the author and publisher cannot assume responsibility for the valid-
ity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright
holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this
form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may
rectify in any future reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or uti-
lized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopy-
ing, microfilming, and recording, or in any information storage or retrieval system, without written permission from the
publishers.
For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://
www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923,
978-750-8400. CCC is a not-for-profit organization that provides licenses and registration for a variety of users. For
organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged.
Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for
identification and explanation without intent to infringe.
Library of Congress Cataloging-in-Publication Data
Janna, William S.
Introduction to fluid mechanics / William S. Janna. -- 4th ed.
p. cm.
Includes bibliographical references and index.
ISBN 978-1-4200-8524-2 (hardcover : alk. paper)
1. Fluid mechanics. I. Title.
TA357.J36 2010
620.1’06--dc22 2009026753
Visit the Taylor & Francis Web site at
http://www.taylorandfrancis.com
and the CRC Press Web site at
http://www.crcpress.com
Dedication
To Him who ordered the Universe by a word;
Whose love and glory are seen in the
beauty of natural science and in
the accomplishments of simple men;
And to my lovely wife Marla, who daily reflects
this love and glory to me.
This page intentionally left blank
Contents
Preface............................................................................................................................................xiii
Acknowledgments...........................................................................................................................xv
Introduction toFluid Mechanics...................................................................................................xvii
Author............................................................................................................................................xix
Chapter 1 Fundamental Concepts................................................................................................1
1.1 Definitionof a Fluid..............................................................................................................1
1.2 Dimensions and Units............................................................................................................2
1.3 Properties ofFluids................................................................................................................7
1.3.1 Viscosity...................................................................................................................7
1.3.1.1 Time-Independent Fluids............................................................................9
1.3.1.2 Time-Dependent Fluids...............................................................................9
1.3.1.3 ViscoelasticFluids......................................................................................9
1.3.2 Pressure...................................................................................................................12
1.3.3 Density....................................................................................................................12
1.3.4 Kinematic Viscosity................................................................................................13
1.3.5 Surface Tension......................................................................................................13
1.3.6 Specific Heat...........................................................................................................16
1.3.7 Internal Energy........................................................................................................18
1.3.8 Enthalpy..................................................................................................................19
1.3.9 Compressibility Factor=Bulk Modulus...................................................................19
1.3.10 Ideal Gas Law.........................................................................................................21
1.4 Liquids and Gases................................................................................................................22
1.5 Continuum............................................................................................................................22
Problems..........................................................................................................................................23
Chapter 2 Fluid Statics...............................................................................................................35
2.1 Pressure and PressureMeasurement....................................................................................35
2.2 Hydrostatic Forces onSubmerged Plane Surfaces..............................................................47
2.3 Hydrostatic Forces onSubmerged Curved Surfaces...........................................................55
2.4 Equilibriumof AcceleratingFluids.....................................................................................61
2.5 Forces on Submerged Bodies..............................................................................................67
2.6 Stability of Submergedand FloatingBodies.......................................................................71
2.7 Summary..............................................................................................................................75
Problems..........................................................................................................................................76
Chapter 3 Basic Equationsof Fluid Mechanics.......................................................................101
3.1 Kinematics ofFlow............................................................................................................101
3.2 Control Volume Approach.................................................................................................103
3.3 Continuity Equation...........................................................................................................107
3.4 Momentum Equation.........................................................................................................112
3.4.1 Linear Momentum Equation.................................................................................113
3.4.2 Angular Momentum Equation..............................................................................117
vii
viii Contents
3.5 Energy Equation...............................................................................................................120
3.6 Bernoulli’sEquation........................................................................................................126
3.7 Summary..........................................................................................................................135
Problems........................................................................................................................................135
Chapter 4 Dimensional Analysisand Dynamic Similitude.....................................................155
4.1 Dimensional Homogeneity and Analysis........................................................................155
4.1.1 RayleighMethod...................................................................................................157
4.1.2 BuckinghamPi Method........................................................................................161
4.2 Dimensionless Ratios.......................................................................................................163
4.2.1 Flow ina Pipe orConduit....................................................................................163
4.2.2 Flow over ImmersedBodies.................................................................................164
4.2.3 Open-Channel Flow..............................................................................................164
4.2.4 Unbounded Flows.................................................................................................165
4.3 Dimensional Analysisby Inspection...............................................................................165
4.4 Similitude.........................................................................................................................167
4.4.1 Geometric Similarity.............................................................................................168
4.4.2 DynamicSimilarity...............................................................................................169
4.4.3 Modeling...............................................................................................................171
4.5 Correlation ofExperimentalData....................................................................................175
4.6 Summary..........................................................................................................................180
Problems........................................................................................................................................180
Chapter 5 Flow in Closed Conduits.........................................................................................193
5.1 Laminarand TurbulentFlow...........................................................................................193
5.2 Effect of Viscosity...........................................................................................................196
5.2.1 Entrance Effects....................................................................................................197
5.3 PipeDimensions andSpecifications................................................................................199
5.3.1 EquivalentDiametersfor NoncircularDucts........................................................201
5.4 Equationof Motion..........................................................................................................203
5.5 The Friction Factor and Pipe Roughness........................................................................206
5.5.1 Flow throughPipes ofNoncircular Cross Sections..............................................211
5.5.2 Flow throughan Annulus.....................................................................................213
5.5.3 Miscellaneous Geometries....................................................................................216
5.6 Simple Piping Systems....................................................................................................216
5.7 Minor Losses....................................................................................................................227
5.8 Forces Exerted on Fittings byMoving Fluids.................................................................240
5.9 Pipes in Parallel...............................................................................................................243
5.10 Pumps and PipingSystems..............................................................................................247
5.11 Summary..........................................................................................................................250
Problems........................................................................................................................................251
Chapter 6 Flow over Immersed Bodies...................................................................................269
6.1 Boundary-Layer Growthand Separation.........................................................................269
6.1.1 Boundary-Layer Growth.......................................................................................269
6.1.2 Separation..............................................................................................................275
6.2 Drag on Various Two-DimensionalBodies....................................................................276
6.3 Drag on Various Three-Dimensional Bodies..................................................................283
Contents ix
6.4 Applications toGroundVehicles.....................................................................................287
6.4.1 Bicycle–Rider Combinations................................................................................288
6.4.2 Automobiles..........................................................................................................293
6.4.3 Tractor-Trailer Trucks...........................................................................................293
6.5 Lift on Airfoils.................................................................................................................298
6.6 Summary..........................................................................................................................305
Problems........................................................................................................................................305
Chapter 7 Flow in Open Channels...........................................................................................325
7.1 Types ofOpen-Channel Flows........................................................................................325
7.2 Open-Channel Geometry Factors....................................................................................326
7.3 Energy Considerations inOpen-Channel Flows..............................................................329
7.3.1 Flow under aSluice Gate.....................................................................................329
7.3.2 Flow througha Venturi Flume.............................................................................331
7.4 Critical Flow Calculations...............................................................................................335
7.5 Equationsfor Uniform Open-Channel Flows..................................................................338
7.5.1 LaminarOpen-Channel Flow...............................................................................338
7.5.2 Reynolds NumberandTransition.........................................................................341
7.5.3 TurbulentOpen-Channel Flow.............................................................................342
7.6 Hydraulically Optimum Cross Section............................................................................348
7.7 Nonuniform Open-Channel Flow....................................................................................351
7.7.1 GraduallyVariedFlow.........................................................................................351
7.7.2 RapidlyVariedFlow.............................................................................................361
7.8 Summary..........................................................................................................................367
Problems........................................................................................................................................367
Chapter 8 Compressible Flow..................................................................................................377
8.1 Sonic Velocity and Mach Number..................................................................................378
8.2 Stagnation Properties and IsentropicFlow......................................................................382
8.3 Flow througha Channelof Varying Area.......................................................................386
8.4 Normal ShockWaves......................................................................................................397
8.5 Compressible Flow with Friction....................................................................................404
8.6 Compressible Flow with Heat Transfer...........................................................................409
8.7 Summary..........................................................................................................................416
Problems........................................................................................................................................416
Chapter 9 Turbomachinery......................................................................................................423
9.1 Equationsof Turbomachinery..........................................................................................424
9.2 Axial-Flow Turbines........................................................................................................430
9.3 Axial-Flow Compressors, Pumps, andFans....................................................................453
9.4 Radial-Flow Turbines......................................................................................................466
9.5 Radial-Flow Compressors and Pumps.............................................................................470
9.6 Power-Absorbing versus Power-Producing Machines....................................................476
9.7 Dimensional Analysisof Turbomachinery......................................................................478
9.8 Performance Characteristics ofCentrifugal Pumps.........................................................479
9.9 Performance Characteristics ofHydraulic Turbines........................................................487
9.10 Summary..........................................................................................................................488
Problems........................................................................................................................................489