Introduction to Abaqus/CFD for Multiphysics Applications

18 Pages·2012·1.69 MB·English

Introduction to Abaqus/CFD for Multiphysics Applications
2016
About this Course
Course objectives
Upon completion of this course you will be able to:

Set up and create CFD and FSI models with Abaqus
Perform CFD analyses with Abaqus
Perform FSI analyses with Abaqus
Postprocess CFD and FSI results

Targeted audience
Simulation Analysts

Prerequisites
None
2 days
Day 1
Lecture 1 Review of CFD Fundamentals

Lecture 2 Introduction

Lecture 3 Getting Started with Abaqus/CFD

Workshop 1 Unsteady flow across a circular cylinder

Lecture 4 CFD Modeling Techniques – Part 1

Workshop 2 Fluid flow through a pipe with a constriction
Day 2
Lecture 5 CFD Modeling Techniques – Part 2

Lecture 6 Getting Started with FSI Using Abaqus/CFD

Workshop 1 Unsteady flow across a circular cylinder (continued)

Lecture 7 FSI Modeling Techniques

Workshop 3 Antilock braking system

Lecture 8 Postprocessing CFD/FSI Analyses

Workshop 4 Heat transfer analysis of a component-mounted electronic circuit board
SIMULIA
SIMULIA is the Dassault Systèmes brand for Realistic Simulation solutions

Portfolio of established, best-in-class products

Abaqus, Isight, Tosca, fe-safe

All using a common extended licensing pool
SIMULIA’s Power of the Portfolio
• Routine and Advanced Simulation
• Linear and Nonlinear, Static and Dynamic Realistic Human Simulation
Abaqus • Fluid, Thermal, Electrical, Acoustics High Speed Crash & Impact
Noise & Vibration
• Extended Physics through Co-simulation
• Model Preparation and Visualization
• Process Integration
Material Calibration
• Design Optimization
Isight Workflow Automation
• Parametric Optimization
Design Exploration
• Six Sigma and Design of Experiments
• Non-Parametric Optimization Conceptual/Detailed Design
Tosca • Structural and Fluid Flow Optimization Weight, Stiffness, Stress
• Topology, Sizing, Shape, Bead Optimization Pressure Loss Reduction
• Durability Simulation Safety Factors
fe-safe • Low Cycle and High Cycle Fatigue Creep-Fatigue Interaction
Weld Fatigue
• Weld, High Temperature, Non-metallics
Join the Community!
How can you maximize the robust technology of the SIMULIA Portfolio ?
Go to www.3ds.com/slc
to log in or join!
SIMULIA Training
http://www.3ds.com/products-services/simulia/services/training-courses/
Legal Notices
The software described in this documentation is available only under license from Dassault Systèmes
or its subsidiaries and may be used or reproduced only in accordance with the terms of such license.
This documentation and the software described in this documentation are subject to change without
prior notice.
Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any errors or
omissions that may appear in this documentation.
No part of this documentation may be reproduced or distributed in any form without prior written
permission of Dassault Systèmes or its subsidiaries.
© Dassault Systèmes, 2015
Printed in the United States of America.
Abaqus, the 3DS logo, and SIMULIA are trademarks or registered trademarks of Dassault Systèmes or
its subsidiaries in the US and/or other countries.
Other company, product, and service names may be trademarks or service marks of their respective
owners. For additional information concerning trademarks, copyrights, and licenses, see the Legal
Notices in the Abaqus Installation and Licensing Guide.
Revision Status
Lecture 1 11/15 Updated for Abaqus 2016
Lecture 2 11/15 Updated for Abaqus 2016
Lecture 3 11/15 Updated for Abaqus 2016
Lecture 4 11/15 Updated for Abaqus 2016
Lecture 5 11/15 Updated for Abaqus 2016
Lecture 6 11/15 Updated for Abaqus 2016
Lecture 7 11/15 Updated for Abaqus 2016
Lecture 8 11/15 Updated for Abaqus 2016
Workshop 1 11/15 Updated for Abaqus 2016
Workshop 2 11/15 Updated for Abaqus 2016
Workshop 3 11/15 Updated for Abaqus 2016
Workshop 4 11/15 Updated for Abaqus 2016