Internet of Things: A Hardware Development Perspective

287 Pages·2022·17.739 MB·English

by  Mohammad Ayoub Khan

Internet of Things
Prospects in Networking and Communications – P-NetCom
Series Editor: Mohammad M. Banat
Internet of Things
A Hardware Development Perspective
Mohammad Ayoub Khan
For more information about this series, please visit: https://www.routledge.
com/Prospects-in-Networking-and-Communications/book-series/NETCOM
Internet of Things
A Hardware Development
Perspective
Edited by
Mohammad Ayoub Khan
First edition published 2022
by CRC Press
6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742
and by CRC Press
4 Park Square, Milton Park, Abingdon, Oxon, OX14 4RN
CRC Press is an imprint of Taylor & Francis Group, LLC
© 2022 selection and editorial matter, Mohammad Ayoub Khan; individual chapters, the contributors
Reasonable efforts have been made to publish reliable data and information, but the author and pub-
lisher cannot assume responsibility for the validity of all materials or the consequences of their use.
The authors and publishers have attempted to trace the copyright holders of all material reproduced in
this publication and apologize to copyright holders if permission to publish in this form has not been
obtained. If any copyright material has not been acknowledged please write and let us know so we may
rectify in any future reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced,
transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or here-
after invented, including photocopying, microfilming, and recording, or in any information storage or
retrieval system, without written permission from the publishers.
For permission to photocopy or use material electronically from this work, access www.copyright.com
or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-
750-8400. For works that are not available on CCC please contact [e-mail]
Trademark notice: Product or corporate names may be trademarks or registered trademarks and are
used only for identification and explanation without intent to infringe.
ISBN: 978-0-367-64146-7 (hbk)
ISBN: 978-0-367-64148-1 (pbk)
ISBN: 978-1-003-12235-7 (ebk)
DOI: 10.1201/9781003122357
Typeset in Times
by KnowledgeWorks Global Ltd.
BK-TandF-KHAN_9780367641467-211708-FM.indd 4 28/03/22 12:50 PM
This work is dedicated to my wonderful parents, who always
trusted me and allowed me do anything I wanted. I owe all I
have today to God. This work is also dedicated to my wonderful
wife, son, and little angel Amira Fatimah, who have been a
huge source of encouragement for me to go farther in life.
Mohammad Ayoub Khan

Contents
Preface.......................................................................................................................ix
About the Author ......................................................................................................xi
Contributors ...........................................................................................................xiii
PART I Formal Design Flow for IoT Hardware
Chapter 1 Scalable Design and Processor Technology for IoT Applications........3
Mohammad Ayoub Khan and Amit Kumar
Chapter 2 Design Methods and Approaches for IoT Hardware ..........................13
Ali Nezaratizadeh
Chapter 3 IoT Solution Reference Architectures ................................................39
Vinay Chowdary, Tiyasa Bera, and Arpit Jain
PART II S imulation, Modeling, and Programming
Framework
Chapter 4 Hardware Architecture of IoT and Wearable Devices .......................55
Manoj Sharma
Chapter 5 Cache Memory Design for the Internet of Things .............................75
Reeya Agrawal and Neetu Faujdar
Chapter 6 Investigation of Deep Learning Models for IoT Devices .................107
Swagata Bhattacharya and Debotosh Bhattacharjee
PART III Communication Technologies and Trends
Chapter 7 Communication Technologies for M2M and IoT Domain ...............133
Manoj Kumar and Sushil Kumar
vii
viii Contents
Chapter 8 Security Challenges and Solutions in IoT Networks for the
Smart Cities ......................................................................................161
A. Procopiou and T.M. Chen
Chapter 9 Internet of Vehicles: Design, Architecture, and Security
Challenges ........................................................................................205
Abdullah Alharthi, Qiang Ni, and Richard Jiang
PART IV Use Cases
Chapter 10 A Case Study on the Smart Streetlighting Solution Based
on 6LoWPAN ...................................................................................223
Manoj Kumar, Prashant Pandey, and Salil Jain
Chapter 11 IoT-Enabled Real-Time Monitoring of Assembly Line
Production ........................................................................................239
Maneesh Tewari and Devaki Nandan
Chapter 12 IoT-Enabled Hazardous Gas Leakage Detection System
for Citizen’s Safety ...........................................................................257
Prerna Sharma and Latika Kharb
Index ......................................................................................................................271
Preface
The Internet of Things (IoT) is the fastest growing technology that is being adapted
by market and many industries to improve operational expenses, product life, and
health. The IoT is a hot topic that combines hardware, embedded software, web
services, and electronics to create cutting-edge devices that can be used in many
applications like industry, retail, smart home, smart cities, and healthcare. However,
there is no standard hardware for IoT. The IoT is based on the customized architec-
ture and infrastructures to address needs in application-specific domains such as
transportation, traffic, health, and environment. This book focuses on the hardware
architecture, protocols, communication patterns, architectures, and interoperable
issues important to IoT.
The book has 12 chapters. It starts with the fundamental of hardware and design
flow for an IoT system. We have three chapters on these topics covering “Scalable
Design and Processor Technology for IoT,” “Design Methods and Approaches for IoT
Hardware,” and “IoT Solution Reference Architectures.” The second part of the book
consists of three chapters about the “Hardware Architecture of IoT and Wearable
Devices,” “Cache Memory Design for the Internet of Things,” and “Investigation of
Deep Learning Models for IoT Devices.” In the third part, we have three chapters
on “Communication Technologies for M2M and IoT Domain,” “Security Challenges
and Solutions in IoT Networks for the Smart Cities,” and “Internet of Vehicles:
Design, Architecture, and Security Challenges.” The last part contains the case
studies on real-life system that includes “A Case Study on the Smart Streetlighting
Solution Based on 6LoWPAN,” “An IoT-Enabled Real-Time Monitoring of Assembly
Line Production,” and “IoT-Enabled Hazardous Gas Leakage Detection System for
Citizen’s Safety.”
This book will be a good resource for industry practitioners, research scholars,
and academicians to develop new ideas for the IoT.
ix