Innovative processing and manufacturing of advanced ceramics and composites II : a collection of papers presented at the 10th Pacific Rim Conference on Ceramic and Glass Technology, June 2-6, 2013, Coronado, California

214 Pages·2014·10.368 MB·English

by  Naitō, Makio, Garay, Javier E., Lin, Hua-Tay, Colombo, Paolo, Ohji, Tatsuki

Innovative Processing and
Manufacturing of Advanced
Ceramics and Composites II

Innovative Processing and
Manufacturing of Advanced
Ceramics and Composites II
Ceramic Transactions, Volume 243
A Collection of Papers Presented at the
10th Pacific Rim Conference on
Ceramic and Glass Technology
June 2-6, 2013
Coronado, California
Edited by
Tatsuki Ohji
Paolo Colombo
Makio Naito
Javier E. Garay
Volume Editor
Hua-Tay Lin
The
American
Ceramic# 1
Society
WILEY
Copyright © 2014 by The American Ceramic Society. All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to
the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, [phone], fax
[phone], or on the web at www.copyright.com. Requests to the Publisher for permission should
be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ
07030, [phone], fax [phone], or online at http://www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in
preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of
merchantability or fitness for a particular purpose. No warranty may be created or extended by sales
representatives or written sales materials. The advice and strategies contained herein may not be
suitable for your situation. You should consult with a professional where appropriate. Neither the
publisher nor author shall be liable for any loss of profit or any other commercial damages, including
but not limited to special, incidental, consequential, or other damages.
For general information on our other products and services or for technical support, please contact our
Customer Care Department within the United States at [phone], outside the United States at
[phone] or fax [phone].
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit our web site at
www.wiley.com.
Library of Congress Cataloging-in-Publication Data is available.
ISBN: 978-1-118-77150-1
ISSN: 1042-1122
Printed in the United States of America.
10987654321
Contents
Preface ix
NOVEL, GREEN, AND STRATEGIC PROCESSING AND
MANUFACTURING TECHNOLOGIES
Optimized Shaping Process for Transparent Spinel Ceramic 3
Alfred Kaiser, Thomas Hutzler, Andreas Krell, and Robert Kremer
Thermal Diffusion Coatings for Wear-Resistant Components for Oil 13
and Gas Industry
E. Medvedovski, F.A. Chinski, and J. Stewart
POLYMER DERIVED CERAMICS AND COMPOSITES
Polymer-Derived Ceramics for Development of Ultra-High 33
Temperature Composites
C. J. Leslie, H. J. Kim, H. Chen, K. M. Walker, E. E. Boakye, C. Chen,
C. M. Carney, M. K. Cinibulk, and M.-Y. Chen
Siliconboronoxycarbide (SIBOC) Foam from Methyl Borosiloxane 47
Sreejith Krishnan, Tobias Fey, and Peter Greil
Synthesis of a Porous SiC Material from Poiycarbosilane by Direct 61
Foaming and Radiation Curing
Akira Idesaki, Masaki Sugimoto, and Masahito Yoshikawa
Fabrication of SiOC/C Coatings on Stainless Steel using 71
Poly(Phenyl Carbosilane) and their Anti-Corrosion Properties
Yoon Joo Lee, Jong II Kim, Soo Ryong Kim, Woo Teck Kwon, Dong-Geun Shin,
and Yonghee Kim
v
Photo Luminescent Properties of Polymer Derived Ceramics at Near 79
Stoichiometric Si0 -xSiC-y(H) Compositions
2
Masaki Narisawa and Akihiro Iwase, Seiji Watase and Kimihiro Matsukawa, and
Taketoshi Kawai
Synthesis of Hierarchical Porous SiCO Monoliths from Preceramic 85
Polymer Impregnated with Porous Templates
Xuehua Yan, Jianmei Pan, Xiaonong Cheng, Chenghua Zhang, and Guifang Xu
ADVANCED POWDER PROCESSING AND MANUFACTURING
TECHNOLOGIES
Solid Reaction Mechanism of Li C0 and FePOyC Powder 95
2 3
Takashi Hashizume, Atsushi Saiki, and Kiyoshi Terayama
Development of New Synthesis Route of Lanthanum Germanate 103
Oxyapatite from Homogeneous Aqueous Solution
Shouta Kitajima, Kiyoshi Kobayashi, Toru Higuchi, and Yoshio Sakka
Magnetic Orientation of Bismuth Nano-Particles in a Transparent 109
Medium
Naoyuki Kitamura, Kohki Takahashi, Iwao Mogi, Satoshi Awaji, and
Kazuo Watanabe
Control of Dispersion and Agglomeration of CNTS for their 117
Networking—Mechanical and Electrical Properties of
CNT/Alumina Composites
Mitsuaki Matsuoka, Junichi Tatami, and Toru Wakihara
Synthesis and Microstructure Development in Yttria-Magnesia 121
Ceramics for Infrared Transparency
J. A. Miller and I. E. Reimanis
Fabrication of Flake-Like Boehmite/Ceria or Zinc Oxide Composites 131
for UV Shield Coating
Seizo Obata, Susumu Kawai, Michiyuki Yoshida, Osamu Sakurada, and
Kenji Kido
Thermal Degradation Control Study of Carbon Fiber/Polyamide 6 141
Composite using Hexagonal Boron Nitride Powder
Daisuke Shimamoto, Yusuke Imai, and Yuji Hotta
Sol-Gel Auto-Combustion Synthesis of Co-Doped ZnO Diluted 149
Magnetic Semiconductor Nanopowders
Chuanbin Wang, Xuan Zhou, Fei Chen, Qiang Shen, and Lianmeng Zhang
vi · Innovative Processing and Manufacturing of Advanced Ceramics and Composites II
SYNTHESIS AND PROCESSING OF MATERIALS USING ELECTRIC
FIELDS/CURRENTS
Advanced Usage of SPS Technology for Producing Innovative 159
Materials
Foad Naimi, Ludivine Minier, Cedric Morin, Sophie Le Gallet, and
Frederic Bernard
Fabrication of Transparent MgAI 0 Spinel by Optimizing Loading 173
2 4
Schedule during Spark-Plasma-Sintering
Koji Morita, Byung-Nam Kim, Hidehiro Yoshida, Yoshio Sakka, and
Keijiro Hiraga
Properties of WCCo/Diamond Composites Produced by PPS 181
Method Intended for Drill Bits for Machining of Building Stones
Marcin Rosinski, Joanna Wachowicz, Tomasz Plocinski, Tomasz Truszkowski, and
Andrzej Michalski
Surface Morphology of YSZ Thin Films Deposited from a Precursor 193
Solution under the Electrical Fields
Atsushi Saiki, Kento Hamada, and Takashi Hashizume
Author Index 201
Innovative Processing and Manufacturing of Advanced Ceramics and Composites II ■ vii