Incident Investigation and Accident Prevention in the Process and Allied Industries

541 Pages·2006·19.6 MB·English

by  Hyatt

Incident Investigation &
Accident Prevention in the
Process & Allied Industries
by
Nigel Hyatt
Copyright © 2006 by Dyadem Engineering Corporation
Important:Carefullyreadthefollowingdisclaimerbeforereadingorothelwiseusingthisbook.Byusingthisbook,you,as
theenduser, acknowledgethatyouhavereadthisdisclaimer, understandandacceptallthetermsandconditionsandthat
youintendtobelegallyboundbythem.Ifyoudonotagreewiththetermsofthisdisclaimer, donotreadorotherwiseuse
this bookandreturn the same to Dyadem (or the Dyadem appointeddistributor) within 15 days ofdeliveryfor afull
refund.
DISCLAIMER
TheinfonnationandmaterialherewithinhasbeenpreparedbytheAuthor,amemberofDyademEngineeringCorporation
(hitherto known as "DEC") and CRC Press. The infonnation is intended, in good faith, to assist you with incident
investigation and accident prevention as a part of a safety management program. It remains your responsibility to
detennineitsapplicability,specificsuitabilityandthemannerinwhichsuchintendedapplicabilityshouldbeexecuted. It
isfurthennore assumedthatyouoryourappointedpersonnelorappointedrepresentativesshallbeappropriatelyqualified
for its interpretation and applicability.This book is solelyto assistyou in the methodologies and techniques herewithin
presentedand are not to be relied upon orintended as asubstitute foryourown specificdecision making requirements,
yourown specific incidentinvestigation and accidentpreventionrequirements, oras asubstitute for professional advice
associatedwith the aforementioned. This book cannotand does notreplace a qualifiedanalysis in incidentinvestigation
and accident prevention either in general or in part. It is incumbent upon you to perfonn your own investigations,
assessmentsandanalysesandtoobtainprofessionaladvice.Whileeveryattempthasbeenmadetopresentthematerialas
accuratelyaspossible,itdoesnotprecludethepossibilityoferror,eitherfactual, typographical,contextual,interpretative,
norofyounoryourpersonnelnorrepresentativesmakinginterpretation(s)unintendedbytheAuthor, DECoreRCPress.
Furthennore,youareremindedthatthisbookisnotintendedtoreplaceinvestigationsandanalysesperfonnedbyqualified
professionalpersonnel.Theentireriskastothedataorinformationsupplied,use,calculations,perfonnanceresultsand/or
consequencesofthisbookandanalysesarewithyou.Youassumefullresponsibilityforcompliancewithrules,regulations
and statutes, and for environmental, quality control, quality assurance liability, statutory or otherwise, risks, and risk
assessments.Youacknowledgeandunderstandthatnoregulatorybodyorassociationendorsesorotherwiseapprovesthis
book.
Theinfonnationpresentedaspartofthisbookdoesnotcontaindataaboutanyspecificknownplant,process,companyor
individual. In addition, this book does not reflect the policies ofany known specific company. The subject matter is
considered to be pertinent at the time ofpublication. However, it does not preclude the possibility ofpartial or total
invalidationthatmayresultfromlaterlegislation,methodologies,standardsandsoforth.
Furthennore,theAuthor'sviewsandopinions,asexpressedherewithin,donotnecessarilyreflecttheviewsandopinions
ofthereviewersandpersonnelreferencedintheAcknowledgementssectionofthisbook,whoareresponsibleneitherfor
thecontentnormannerofpresentationofthisbook.
Inparticular,inrelationtothesubjectmattercontainedwithin,youareremindedthatattemptstopreventnearmissesand
preventpossibleaccidentscanneverbeguaranteed,sinceriskcanneverbetotallyeliminated,howeverdiligenttheefforts
Copyright © 2006 by Dyadem Engineering Corporation
may be. Neither the Author, DEC nor Dyadem International Ltd. (hitherto known as"DIL") nor any oftheir directors,
officers, employees, distributors oragents, shall be held liable for special or consequential damages arising directly or
indirectlyfromtheuseormisuseoftheinformationandmaterialherewithincontainedorreferenced.Innoeventwillthe
Author, DEC, CRC Press DIL, nor any oftheir directors, officers, employees, distributors or agents be liable for any
damages,howsoevercaused,includingbutnotlimitedto,anylostprofitsorrevenue,lossofmarketshare,lostsavings,loss
ofuse orlackofavailability orcorruption offacilities including withoutlimitationcomputerresources, informationand
stored data, indirect, special, incidental, punitive, exemplary, aggravated, economic or consequential damages, adverse
outcomes, personal injuryordeath, contributionorindemnity, arising outoftheuse, orinabilitytousethisbook, orfor
claimbyanyotherparty,eveniftheAuthor,DEC,CRCPress,DILoranyofitslawfulagents,distributorsoremployees
havebeenadvisedofthepossibilityofsuchdamagesorclaim.InnocasewilltheAuthor,DEC,CRCPress,DIL,norany
oftheir directors, officers, employees, distributors or agents be liable in part or in total, whether in contract, tort or
otherwiseandyourexclusiveremedyshallberegardlessofthenumberofclaims,fornomorethantheamountpaidbyyou
forthisbook.Somejurisdictionsdonotallowtheexclusionorlimitationofimpliedwarrantiesorlimitationofliabilityfor
incidentalorconsequentialdamages,sotheabovelimitationorexclusionmaynotapplytoyou.Theforegoingparagraphs
onwarrantydisclaimerandlimitationsonliabilityshallsurviveanytransferofownershiporanyformofreallocation.
Byusing thisbook you acknowledge and understandthatany dispute that arises shall be governedbyand construed in
accordancewiththelawsofOntarioandfederallawsofCanadaapplicablethereinandshallbetreated,inallrespects,asan
Ontario contract. The Parties irrevocably submit to the non-exclusivejurisdiction ofthe courts ofOntario. The Parties
hereby expressly exclude the application ofthe United Nations Convention on Contracts for the International Sale of
GoodsandtheSaleofGoodsAct(Ontario)asamended,replacedorre-enactedfromtimetotime.
COPYRIGHT: All applicable copyright laws governing United States, Canadian and international copyright and
intellectualpropertylaws andtreaties protectthisbook. Youagree thatthisbook(exceptfor anypubliclyavailable data
containedtherein)areconfidentialtoandrightstoorembodiedinthisbookisownedbyDEC.DECretainsallrightsnot
expresslygranted.Copyright©2006DyademEngineeringCorporation.

Copyright © 2006 by Dyadem Engineering Corporation
IncidentInvestigation & AccidentPrevention in theProcess & AlliedIndustries
NigelHyatt
Copyright© 2006 by DyademEngineering Corporation
1stEdition, 1stPrinting- April 2006
ISBN 0-8493-0778-3
Co-Publishedanddistributedby CRC Press, TaylorandFrancis Group
All rightsreserved. No partofthis bookmaybe reproduced inany form orby any means,
electronic, mechanical, photocopying, recording or otherwise, with out the prior written
permissionofthepublisher.
Forinfonnation, write to:
DyademEngineering Corporation,
9050 Yonge Street, Suite401
RichmondHill, Ontario
Canada
L4C 9S6
Phone: [phone]
Fax: [phone]
Website: www.dyadem.com

CoverIllustration: "Refinerywith catcracker, late afternoon" byN. Hyatt
Copyright © 2006 by Dyadem Engineering Corporation
informa
Taylor&Francis is the Academic DivisionofInfonnapIc.

Copyright © 2006 by Dyadem Engineering Corporation
LibraryofCongressCataloging-in-PublicationData
CatalogrecordisavailablefromtheLibraryofCongress
This book contains information obtained from authentic and highly regarded sources. Reprinted material is
quotedwithpermission, andsourcesareindicated.Awidevarietyofreferencesarelisted.Reasonableefforts
have been made to publish reliable data and information, but the author and the publisher cannot assume
responsibilityforthevalidityofallmaterialsorfortheconsequencesoftheiruse.
No part ofthis book may be reprinted, reproduced, transmitted, orutilized in any form by any electronic,
mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and
recording,orinanyinformationstorageorretrievalsystem,withoutwrittenpermissionfromthepublishers.
For permission to photocopy or use material electronically from this work, please access
www.copyright.com (http://www.copyright.com!) or contact the Copyright Clearance Center, Inc. (CCC)
222RosewoodDrive,Danvers,MA01923,978-750-8400. CCCisanot-for-profitorganizationthatprovides

licenses andregistration foravarietyofusers. Fororganizations thathavebeengrantedaphotocopy license
bytheCCC,aseparatesystemofpaymenthasbeenarranged.
Trademark Notice: Productorcorporatenames maybetrademarks orregisteredtrademarks, andareused
onlyforidentificationandexplanationwithoutintenttoinfringe.
VisittheTaylor&FrancisWebsiteathttp://www.taylorandfrancis.com
VisittheCRC PressWebsiteathttp://www.crcpress.com
Copyright © 2006 by Dyadem Engineering Corporation
Aboutthe Author
Nigel Hyatt has extensive expertise and experience in Hazardous Risk Assessment,
Incident Investigation, Hazards Analysis and Risk Management. Mr. Hyatt is a
professional engineerwith almost 40 years ofindustrial experience in design, operations,
development, engineering and risk fields in the Petrochemical, Refinery, Offshore Oil &
Gas, Chemical, Environmental, Power, Biochemicaland FoodIndustries.
Mr. Hyatt has been involved with a wide range ofIncident Investigations involving fires
and explosions that also include major incidents. Over a 24-year period, he worked in a
leadership role for two major engineering companies, managing and completing projects
for significantmultinational firms. In 1987, he was Risk Analysis ProgramManagerfor a
large tar sands expansion study. He was responsible for the creation, setup and
implementation of risk assessment programs that dealt with many leading consulting
companies as well asbeing focused towards meetingthe needs ofinsurance companies.
His experience has not only been focused on risk fields such as assessment, analysis,
incidentinvestigation andrisk managementbut is also an originatorofPHA-Pro®, one of
theworld's bestsellinghazards identification software tools.
Mr. Hyatt is used to working with, and being responsible for, multi-disciplinary teams of
people. He regularly gives courses in the field of risk and safety and is particularly
interested in extending the boundaries and methodologies in order to reduce risk and
preventaccidents.
Mr. Hyatt is registered as a Professional Engineer in Ontario, is a Chartered Engineer of
the U.K. and is also a Member of the Institution of Chemical Engineers. He has 3
children, 2grandchildren andresides with his wife inRichmondHill, Ontario.

Copyright © 2006 by Dyadem Engineering Corporation
Professional associates:
• TimMcGuire • DavidMoore
• Marcello Oliverio • MikeHazzan
• GordonCowan • BrianKelly
• FrankCurry • InderRattan
• Martin Sich
NigelHyatt
RichmondHill
Ontario, 2006

Copyright © 2006 by Dyadem Engineering Corporation
Acknowledgments
In writing this bookIwould liketo acknowledge the following valuedroles:
Principal reviewers oftext:
• AlexVervoom • John Doyle
• BobBaird • Bala Subramanyan
• ProfessorDouglas Napier • AnnaAnandarajan
• Philippe Guillard
Assistance with preparation:
• Narenderpal Marwaha • Rob Bartlett
• DavidBlanchard • Kerry Kelly
• DrAngelaWong • Katherine Park
• Vishal Shah
Dyadem reviewers and commenters:
• SteveBondarewski • Carlos Vargas
• KumarIsrani • SaudAhmed
• Jorge Larez • Hugo Forte
• PaulMainprize
Supporters:
• Michael Hyatt • FionaGoy
• RichardHyatt • Sergey Osipov
• Susan Hyatt • TomWilson
• KevinNorth
Copyright © 2006 by Dyadem Engineering Corporation
TableofContents TC-l
Table of Contents
Preface PR-1
Introduction and Guide IG-1
Purpose IG-l
Who ShouldUse this Book IG-l
Howto Use this Book IG-2
AccidentPrevention IG-8
Chapter 1: Purpose ofIncidentInvestigation 1-1
CompliancewithIncidentReporting Requirements in the USA 1-3
ComplianceunderHealth & Safety Executive(HSE) inthe UK 1-6
BasicPoints when Conductingthe Investigation 1-6
Example 1-9
Chapter2: Onsite Investigation: Initial &OtherIssues 2-1
Categories ofIncidentandInitial Requirements 2-1
Internal andExternal InvestigationCriteria 2-3
Role ofPhotographic Evidence 2-6
Type ofInvestigationTeamNeeded 2-8
Types ofEvidence Required 2-9
Disassembly, Testing and SecuringofEvidence 2-10
Working Hypothesis for Incident 2-11
Dealingwiththe Mass MediaFollowingan Incident 2-12
Dealingwiththe SurroundingCommunity 2-12
Chapter3: Evidence Gathering: Eyewitness Testimonies
and Interviews 3-1
Heinrich's Observations: Ratio ofFatalitiesto Serious and LesserInjuries 3-8
Eyewitness Testimony 3-9
InterviewingWitnesses 3-11
RecordingofWitness Testimony 3-17
Maintaining Confidentiality 3-20
SummaryonInterviewing Witnesses 3-21
IntentionalDamage 3-22
Chapter4: Specific Questions for Evidence Gathering 4-1
Evidence GatheringThroughQuestions 4-1
Differences BetweenEyewitnesses and Interviewees 4-2
Interviewingand BeingOrganized 4-3
Copyright © 2006 by Dyadem Engineering Corporation