Table Of ContentEditors:
Geotextile encapsulated sand elements are three-dimensional systems manufactured E
d A. Bezuijen
from textile materials, non-woven materials or combinations of textile and non- it
o
woven materials that are fi lled with sand on-site. These systems are relatively new rs E.W. Vastenburg
and the number of applications is growing in river and coastal engineering. Quite : B
e
often Geosystems are mentioned as a possible solution, but planners, designers and z
u
contractors feel rather hesitant about the application of geotextile encapsulated sand ije
n
elements due to a lack of experience and adequate design rules. &
V
a
The use of geosystems has the advantage that local material can be applied and that s
t
e
no (expensive) quarry stone needs to be extracted and transported from the mountains n
b
to the site. Compared to traditional construction methods (with quarry stone) the u
r
g
application of geotextile sand fi lled elements may add considerable operational
advantages to the execution of marine works and may offer attractive fi nancial
opportunities. In the application of geotextile encapsulated sand elements however,
proper attention should be paid to the laying down of different responsibilities of the
parties in the contract.
In Geosystems. Design Rules and Applications four types of geotextile sand
G
elements are distinguished, each with specifi c properties: geo-bags, geo-mattresses,
e
geotextile tubes and geotextile containers. The focus is on the use of geosystems fi lled
o
with sand as a construction in river and coastal engineering. Geosystems fi lled with
s
sludge are not covered. The chapters “Introduction” and “General design aspects” y
s
are followed by four chapters of the same structure dealing with the various systems.
t
Each of these four chapters starts with a general description and applications and e
m
ends with a calculation example. Design aspects are dealt with in the remaining
paragraphs. s
Geosystems. Design Rules and Applications is based on research commissioned D
e Geosystems
by the Dutch Rijkswaterstaat and Delft Cluster. The realisation of the Dutch version s
ig
was coordinated by a CUR-committee. The English version is a translation of the n
R
Dutch version (CUR-publication 217). However, new developments have been added u
and the text was checked once again and improved. Geosystems. Design Rules and le
s
Applications is an essential reference for professionals and academics interested a Design Rules and Applications
n
in River and Coastal Engineering, but aims also at those interested in Geotechnical d
A
Engineering. p
p
lic
a
t
io
n
s
an informa business
Geosystems. Design Rules
and Applications
FFMM..iinndddd ii 1100//1133//22001122 55::3355::0000 PPMM
FFMM..iinndddd iiii 1100//1133//22001122 55::3355::0011 PPMM
Geosystems. Design Rules
and Applications
A. Bezuijen & E.W. Vastenburg
Deltares, Delft, The Netherlands
FFMM..iinndddd iiiiii 1100//1133//22001122 55::3355::0011 PPMM
CRC Press
Taylor & Francis Group
6000 Broken Sound Parkway NW, Suite 300
Boca Raton, FL 33487-2742
© 2013 by Taylor & Francis Group, LLC
CRC Press is an imprint of Taylor & Francis Group, an Informa business
No claim to original U.S. Government works
Version Date: 20130228
International Standard Book Number-13: 978-0-203-07286-8 (eBook - PDF)
This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been
made to publish reliable data and information, but the author and publisher cannot assume responsibility for the valid-
ity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright
holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this
form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may
rectify in any future reprint.
Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or uti-
lized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopy-
ing, microfilming, and recording, or in any information storage or retrieval system, without written permission from the
publishers.
For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://
www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923,
978-750-8400. CCC is a not-for-profit organization that provides licenses and registration for a variety of users. For
organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged.
Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for
identification and explanation without intent to infringe.
Visit the Taylor & Francis Web site at
http://www.taylorandfrancis.com
and the CRC Press Web site at
http://www.crcpress.com
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2013 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in The Netherlands by PrintSupport4U, Meppel
All rights reserved. No part of this publication or the information contained
herein may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, by photocopying, recording or
otherwise, without prior permission in writing from the publisher. Innovations
reported here may not be used without the approval of the authors.
Although all care is taken to ensure integrity and the quality of this publication
and the information herein, no responsibility is assumed by the publishers nor
the author for any damage to the property or persons as a result of operation
or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 447, 2300 AK Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
Library of Congress Cataloging-in-Publication Data
Bezuijen, A.
Geosystems : design rules and applications / A. Bezuijen & E.W. Vastenburg. -- 1st ed.
p. cm.
Includes bibliographical references and index.
ISBN 978-0-415-62148-9 (hardback : alk. paper) -- 1. Geotextiles.
2. Hydraulic engineering--Equipment and supplies. I. Vastenburg, E. W. II. Title.
TA455.G44B49 2013
627--dc23
2012032876
ISBN: 978-0-415-62148-9 (Hbk)
ISBN: 978-0-203-07286-8 (eBook)
FFMM..iinndddd iivv 1100//1133//22001122 55::3355::0011 PPMM
Contents
Preface ix
Notations xi
List of figures xv
1 Introduction 1
1.1 Why there is a need for design rules for geotextile-encapsulated
sand elements 1
1.2 Document structure 1
2 General design aspects 3
2.1 Basic principles of geotextile-encapsulated sand elements 3
2.2 Design approach 4
2.3 Safety considerations 7
2.3.1 Introduction 7
2.3.2 Deterministic method 7
2.3.3 Potential failure mechanisms 8
2.4 Material aspects of geotextiles 9
2.4.1 Raw materials 9
2.4.2 Sand tightness 10
2.4.3 Permeability 11
2.4.4 Tensile strength and strain 11
2.4.5 Seams 12
2.4.6 Damage during installation of gravel layers 14
2.4.7 Durability 14
2.4.8 CE marking 16
3 Geotextile bags 19
3.1 Application and general experimental data 19
3.2 Installation procedure 20
3.3 Geometric design 21
FFMM..iinndddd vv 1100//1133//22001122 55::3355::0011 PPMM
vi Contents
3.4 Failure modes and safety considerations 22
3.5 Design aspects 23
3.5.1 Material choice 23
3.5.2 Required tensile strength 23
3.5.3 Stability in waves 24
3.5.4 Stability when subject to longitudinal current flows 27
3.5.5 Stability when subject to overtopping currents 29
3.5.6 Stability of geotextile bags placed in mounds 30
3.6 Construction aspects 31
3.7 Calculation example 32
4 Geotextile mattresses 37
4.1 Application areas and general experimental data 37
4.2 Installation procedure 39
4.3 Geometric design 39
4.4 Potential failure mechanisms and safety considerations 41
4.5 Design aspects 41
4.5.1 Material choice 41
4.5.2 Required tensile strength 42
4.5.3 Stability in waves 45
4.5.4 Stability in longitudinal currents 45
4.5.5 Geotechnical stability 46
4.6 Construction aspects 46
4.7 Calculation example 47
5 Geotextile tubes 51
5.1 Applications and general experimental data 51
5.2 Installation procedure 52
5.2.1 General 52
5.2.2 Pump speed and pump capacity 53
5.2.3 Fill material 55
5.3 Geometric design 57
5.4 Failure mechanisms and safety considerations 60
5.5 Design aspects 60
5.5.1 Material choice and fabrication 60
5.5.2 Required tensile strength 61
5.5.3 Stability 64
5.6 Construction aspects 66
5.7 Calculation example 67
6 Geotextile containers 71
6.1 Application areas and general experimental data 71
FFMM..iinndddd vvii 1100//1133//22001122 55::3355::0011 PPMM
Contents vii
6.2 Installation procedure 71
6.2.1 General 71
6.2.2 Fill methodology 72
6.2.3 Fill material 72
6.2.4 Degree of filling 73
6.3 Geometric design 74
6.4 Failure mechanisms and safety considerations 77
6.5 Design aspects 78
6.5.1 Material choice 78
6.5.2 Loading on geotextile while opening the split barge 78
6.5.3 Loading on geotextile upon impact on the bottom 79
6.5.4 Required tensile strength 85
6.5.5 Stability in waves 86
6.5.6 Stability in currents over the structure 87
6.5.7 Stacking stability 88
6.5.8 Influence of wave-induced liquefaction 91
6.5.9 Placement accuracy 92
6.6 Construction aspects 94
6.7 Calculation example 95
Appendix A: Permeability of geotextiles 101
Appendix B: CE marking 107
Appendix C: Design charts for the geotechnical stability of geotextile
mattresses and geotextile bags on slope revetments 113
Appendix D: Dimensions and shape of geotextile tubes 115
Appendix E: Shape and forces in geotextile tubes (Timoshenko method) 119
Appendix F: Tensile load in geotextile container during the opening
of the split barge 125
Appendix G: Fall velocity of the geotextile container 131
Appendix H: Placement accuracy for geotextile containers 135
References 139
Subject index 143
FFMM..iinndddd vviiii 1100//1133//22001122 55::3355::0011 PPMM
FFMM..iinndddd vviiiiii 1100//1133//22001122 55::3355::0011 PPMM
