Table Of ContentETSI TS 136 521-1
V9.3.0
(2011-01)
Technical Specification
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA);
User Equipment (UE) conformance specification;
Radio transmission and reception;
Part 1: Conformance testing
(3GPP TS 36.521-1 version 9.3.0 Release 9)
3GPP TS 36.521-1 version 9.3.0 Release 9 1 ETSI TS 136 521-1 V9.3.0 (2011-01)
Reference
RTS/TSGR-0536521-1v930
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM, TIPHONTM, the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 2 ETSI TS 136 521-1 V9.3.0 (2011-01)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or
GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables.
The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under
http://webapp.etsi.org/key/queryform.asp.
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 3 ETSI TS 136 521-1 V9.3.0 (2011-01)
Contents
Intellectual Property Rights ................................................................................................................................ 2
Foreword ............................................................................................................................................................. 2
Foreword ........................................................................................................................................................... 15
Introduction ...................................................................................................................................................... 15
1 Scope ...................................................................................................................................................... 16
2 References .............................................................................................................................................. 17
3 Definitions, symbols and abbreviations ................................................................................................. 18
3.1 Definitions ........................................................................................................................................................ 18
3.2 Symbols ............................................................................................................................................................ 18
3.3 Abbreviations ................................................................................................................................................... 19
4 General ................................................................................................................................................... 21
5 Frequency bands and channel arrangement ............................................................................................ 22
5.1 General ............................................................................................................................................................. 22
5.2 Operating bands ................................................................................................................................................ 22
5.3 TX–RX frequency separation ........................................................................................................................... 22
5.4 Channel arrangement ........................................................................................................................................ 23
5.4.1 Channel spacing .......................................................................................................................................... 23
5.4.2 Channel bandwidth ..................................................................................................................................... 23
5.4.2.1 Channel bandwidths per operating band ............................................................................................... 24
5.4.3 Channel raster ............................................................................................................................................. 25
5.4.4 Carrier frequency and EARFCN ................................................................................................................. 25
6 Transmitter Characteristics ..................................................................................................................... 27
6.1 General ............................................................................................................................................................. 27
6.2 Transmit power ................................................................................................................................................ 27
6.2.1 Void ............................................................................................................................................................ 27
6.2.2 UE Maximum Output Power ...................................................................................................................... 27
6.2.2.1 Test purpose .......................................................................................................................................... 27
6.2.2.2 Test applicability ................................................................................................................................... 27
6.2.2.3 Minimum conformance requirements ................................................................................................... 27
6.2.2.4 Test description ..................................................................................................................................... 28
6.2.2.4.1 Initial condition ............................................................................................................................... 28
6.2.2.4.2 Test procedure ................................................................................................................................. 29
6.2.2.4.3 Message contents ............................................................................................................................. 30
6.2.2.5 Test requirements .................................................................................................................................. 30
6.2.3 Maximum Power Reduction (MPR) ........................................................................................................... 31
6.2.3.1 Test purpose .......................................................................................................................................... 31
6.2.3.2 Test applicability ................................................................................................................................... 31
6.2.3.3 Minimum conformance requirements ................................................................................................... 31
6.2.3.4 Test description ..................................................................................................................................... 31
6.2.3.4.1 Initial condition ............................................................................................................................... 31
6.2.3.4.2 Test procedure ................................................................................................................................. 32
6.2.3.4.3 Message contents ............................................................................................................................. 33
6.2.3.5 Test requirements .................................................................................................................................. 33
6.2.4 Additional Maximum Power Reduction (A-MPR) ..................................................................................... 35
6.2.4.1 Test purpose .......................................................................................................................................... 35
6.2.4.2 Test applicability ................................................................................................................................... 35
6.2.4.3 Minimum conformance requirements ................................................................................................... 35
6.2.4.4 Test description ..................................................................................................................................... 36
6.2.4.4.1 Initial condition ............................................................................................................................... 36
6.2.4.4.2 Test procedure ................................................................................................................................. 43
6.2.4.4.3 Message contents ............................................................................................................................. 44
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 4 ETSI TS 136 521-1 V9.3.0 (2011-01)
6.2.4.5 Test requirements .................................................................................................................................. 46
6.2.5 Configured UE transmitted Output Power .................................................................................................. 56
6.2.5.1 Test purpose .......................................................................................................................................... 56
6.2.5.2 Test applicability ................................................................................................................................... 56
6.2.5.3 Minimum conformance requirements ................................................................................................... 56
6.2.5.4 Test description ..................................................................................................................................... 57
6.2.5.4.1 Initial conditions .............................................................................................................................. 57
6.2.5.4.2 Test procedure ................................................................................................................................. 58
6.2.5.4.3 Message contents ............................................................................................................................. 58
6.2.5.5 Test requirement ................................................................................................................................... 58
6.3 Output Power Dynamics .................................................................................................................................. 59
6.3.1 Void ............................................................................................................................................................ 59
6.3.2 Minimum Output Power ............................................................................................................................. 59
6.3.2.1 Test purpose .......................................................................................................................................... 59
6.3.2.2 Test applicability ................................................................................................................................... 59
6.3.2.3 Minimum conformance requirements ................................................................................................... 59
6.3.2.4 Test description ..................................................................................................................................... 60
6.3.2.4.1 Initial conditions .............................................................................................................................. 60
6.3.2.4.2 Test procedure ................................................................................................................................. 60
6.3.2.4.3 Message contents ............................................................................................................................. 61
6.3.2.5 Test requirement ................................................................................................................................... 61
6.3.3 Transmit OFF power ................................................................................................................................... 61
6.3.3.1 Test purpose .......................................................................................................................................... 61
6.3.3.2 Test applicability ................................................................................................................................... 61
6.3.3.3 Minimum conformance requirement ..................................................................................................... 61
6.3.3.4 Test description ..................................................................................................................................... 62
6.3.3.5 Test requirement ................................................................................................................................... 62
6.3.4 ON/OFF time mask ..................................................................................................................................... 62
6.3.4.1 General ON/OFF time mask ................................................................................................................. 62
6.3.4.1.1 Test purpose .................................................................................................................................... 62
6.3.4.1.2 Test applicability ............................................................................................................................. 62
6.3.4.1.3 Minimum conformance requirement ............................................................................................... 62
6.3.4.1.4 Test description ............................................................................................................................... 63
6.3.4.1.4.1 Initial conditions ........................................................................................................................ 63
6.3.4.1.4.2 Test procedure ............................................................................................................................ 64
6.3.4.1.4.3 Message contents ....................................................................................................................... 64
6.3.4.1.5 Test requirement .............................................................................................................................. 65
6.3.4.2 PRACH and SRS time mask ................................................................................................................. 65
6.3.4.2.1 PRACH time mask .......................................................................................................................... 66
6.3.4.2.2 SRS time mask ................................................................................................................................ 68
6.3.5 Power Control ............................................................................................................................................. 72
6.3.5.1 Power Control Absolute power tolerance ............................................................................................. 72
6.3.5.1.1 Test purpose .................................................................................................................................... 72
6.3.5.1.2 Minimum conformance requirement ............................................................................................... 72
6.3.5.1.3 Test applicability ............................................................................................................................. 73
6.3.5.1.4 Test description ............................................................................................................................... 73
6.3.5.1.5 Test requirement .............................................................................................................................. 74
6.3.5.2 Power Control Relative power tolerance ............................................................................................... 75
6.3.5.2.1 Test purpose .................................................................................................................................... 75
6.3.5.2.2 Test applicability ............................................................................................................................. 75
6.3.5.2.3 Minimum conformance requirement ............................................................................................... 75
6.3.5.2.4 Test description ............................................................................................................................... 76
6.3.5.2.5 Test requirement .............................................................................................................................. 83
6.3.5.3 Aggregate power control tolerance ....................................................................................................... 90
6.3.5.3.1 Test purpose .................................................................................................................................... 90
6.3.5.3.2 Test applicability ............................................................................................................................. 90
6.3.5.3.3 Minimum conformance requirement ............................................................................................... 90
6.3.5.3.4 Test description ............................................................................................................................... 91
6.3.5.3.5 Test requirement .............................................................................................................................. 93
6.4 Void .................................................................................................................................................................. 93
6.5 Transmit signal quality ..................................................................................................................................... 93
6.5.1 Frequency Error .......................................................................................................................................... 94
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 5 ETSI TS 136 521-1 V9.3.0 (2011-01)
6.5.1.1 Test purpose .......................................................................................................................................... 94
6.5.1.2 Test applicability ................................................................................................................................... 94
6.5.1.3 Minimum conformance requirements ................................................................................................... 94
6.5.1.4 Test description ..................................................................................................................................... 94
6.5.1.4.1 Initial condition ............................................................................................................................... 94
6.5.1.4.2 Test procedure ................................................................................................................................. 95
6.5.1.4.3 Message contents ............................................................................................................................. 96
6.5.1.5 Test requirement ................................................................................................................................... 96
6.5.2 Transmit modulation ................................................................................................................................... 96
6.5.2.1 Error Vector Magnitude (EVM) ............................................................................................................ 96
6.5.2.1.1 Test Purpose .................................................................................................................................... 96
6.5.2.1.2 Test applicability ............................................................................................................................. 96
6.5.2.1.3 Minimum conformance requirements .............................................................................................. 96
6.5.2.1.4 Test description ............................................................................................................................... 97
6.5.2.1.5 Test requirement ............................................................................................................................ 101
6.5.2.1A PUSCH-EVM with exclusion period .................................................................................................. 101
6.5.2.1A.1 Test purpose .................................................................................................................................. 101
6.5.2.1A.2 Test applicability ........................................................................................................................... 101
6.5.2.1A.3 Minimum conformance requirement ............................................................................................. 101
6.5.2.1A.4 Test description ............................................................................................................................. 102
6.5.2.1A.5 Test requirement ............................................................................................................................ 103
6.5.2.2 Carrier leakage .................................................................................................................................... 104
6.5.2.2.1 Test Purpose .................................................................................................................................. 104
6.5.2.2.2 Test applicability ........................................................................................................................... 104
6.5.2.2.3 Minimum conformance requirements ............................................................................................ 104
6.5.2.2.4 Test description ............................................................................................................................. 104
6.5.2.2.5 Test requirement ............................................................................................................................ 106
6.5.2.3 In-band emissions for non allocated RB ............................................................................................. 106
6.5.2.3.1 Test Purpose .................................................................................................................................. 106
6.5.2.3.2 Test applicability ........................................................................................................................... 106
6.5.2.3.3 Minimum conformance requirements ............................................................................................ 106
6.5.2.3.4 Test description ............................................................................................................................. 107
6.5.2.3.5 Test requirement ............................................................................................................................ 109
6.5.2.4 EVM equalizer spectrum flatness ....................................................................................................... 110
6.5.2.4.1 Test Purpose .................................................................................................................................. 110
6.5.2.4.2 Test applicability ........................................................................................................................... 110
6.5.2.4.3 Minimum conformance requirements ............................................................................................ 110
6.5.2.4.4 Test description ............................................................................................................................. 112
6.5.2.4.5 Test requirement ............................................................................................................................ 113
6.6 Output RF spectrum emissions ....................................................................................................................... 114
6.6.1 Occupied bandwidth ................................................................................................................................. 114
6.6.1.1 Test purpose ........................................................................................................................................ 114
6.6.1.2 Test applicability ................................................................................................................................. 114
6.6.1.2 Minimum conformance requirements ................................................................................................. 114
6.6.1.4 Test description ................................................................................................................................... 115
6.6.1.4.1 Initial conditions ............................................................................................................................ 115
6.6.1.4.2 Test procedure ............................................................................................................................... 116
6.6.1.4.3 Message contents ........................................................................................................................... 116
6.6.1.5 Test requirement ................................................................................................................................. 116
6.6.2 Out of band emission ................................................................................................................................ 116
6.6.2.1 Spectrum Emission Mask .................................................................................................................... 116
6.6.2.1.1 Test purpose .................................................................................................................................. 116
6.6.2.1.2 Test applicability ........................................................................................................................... 116
6.6.2.1.3 Minimum conformance requirements ............................................................................................ 117
6.6.2.1.4 Test description ............................................................................................................................. 117
6.6.2.1.5 Test requirements .......................................................................................................................... 119
6.6.2.2 Additional Spectrum Emission Mask .................................................................................................. 119
6.6.2.2.1 Test purpose .................................................................................................................................. 119
6.6.2.2.2 Test applicability ........................................................................................................................... 120
6.6.2.2.3 Minimum conformance requirements ............................................................................................ 120
6.6.2.2.4 Test description ............................................................................................................................. 121
6.6.2.2.5 Test requirements .......................................................................................................................... 127
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 6 ETSI TS 136 521-1 V9.3.0 (2011-01)
6.6.2.3 Adjacent Channel Leakage power Ratio ............................................................................................. 129
6.6.2.3.1 Test purpose .................................................................................................................................. 129
6.6.2.3.2 Test applicability ........................................................................................................................... 129
6.6.2.3.3 Minimum conformance requirements ............................................................................................ 129
6.6.2.3.4 Test description ............................................................................................................................. 131
6.6.2.3.5 Test requirement ............................................................................................................................ 133
6.6.2.4 Void..................................................................................................................................................... 134
6.6.3 Spurious emissions ................................................................................................................................... 134
6.6.3.1 Transmitter Spurious emissions .......................................................................................................... 134
6.6.3.1.1 Test purpose .................................................................................................................................. 134
6.6.3.1.2 Test applicability ........................................................................................................................... 134
6.6.3.1.3 Minimum conformance requirements ............................................................................................ 134
6.6.3.1.4 Test description ............................................................................................................................. 135
6.6.3.1.5 Test requirement ............................................................................................................................ 136
6.6.3.2 Spurious emission band UE co-existence ........................................................................................... 137
6.6.3.2.1 Test purpose .................................................................................................................................. 137
6.6.3.2.2 Test applicability ........................................................................................................................... 137
6.6.3.2.3 Minimum conformance requirements ............................................................................................ 137
6.6.3.2.4 Test description ............................................................................................................................. 140
6.6.3.2.5 Test requirement ............................................................................................................................ 141
6.6.3.3 Additional spurious emissions ............................................................................................................ 145
6.6.3.3.1 Test purpose .................................................................................................................................. 145
6.6.3.3.2 Test applicability ........................................................................................................................... 145
6.6.3.3.3 Minimum conformance requirements ............................................................................................ 145
6.6.3.3.3.4 Minimum requirement (network signalled value “NS_09”) .......................................................... 147
6.6.3.3.4 Test description ............................................................................................................................. 147
6.6.3.3.5 Test requirement ............................................................................................................................ 153
6.7 Transmit intermodulation ............................................................................................................................... 154
6.7.1 Test purpose .............................................................................................................................................. 154
6.7.2 Test applicability ...................................................................................................................................... 155
6.7.3 Minimum conformance requirements ....................................................................................................... 155
6.7.4 Test description ......................................................................................................................................... 155
6.7.4.1 Initial conditions ................................................................................................................................. 155
6.7.4.3 Test procedure ..................................................................................................................................... 156
6.7.4.3 Message contents ................................................................................................................................ 156
6.7.5 Test requirement ....................................................................................................................................... 157
7 Receiver Characteristics ....................................................................................................................... 158
7.1 General ........................................................................................................................................................... 158
7.2 Diversity characteristics ................................................................................................................................. 158
7.3 Reference sensitivity level .............................................................................................................................. 158
7.3.1 Test purpose .............................................................................................................................................. 158
7.3.2 Test applicability ...................................................................................................................................... 158
7.3.3 Minimum conformance requirements ....................................................................................................... 159
7.3.4 Test description ......................................................................................................................................... 161
7.3.4.1 Initial conditions ................................................................................................................................. 161
7.3.4.2 Test procedure ..................................................................................................................................... 162
7.3.4.3 Message contents ................................................................................................................................ 162
7.3.5 Test requirement ....................................................................................................................................... 163
7.4 Maximum input level ..................................................................................................................................... 165
7.4.1 Test purpose .............................................................................................................................................. 165
7.4.2 Test applicability ...................................................................................................................................... 166
7.4.3 Minimum conformance requirements ....................................................................................................... 166
7.4.4 Test description ......................................................................................................................................... 166
7.4.4.1 Initial conditions ................................................................................................................................. 166
7.4.4.2 Test procedure ..................................................................................................................................... 167
7.4.4.3 Message contents ................................................................................................................................ 167
7.4.5 Test requirement ....................................................................................................................................... 168
7.5 Adjacent Channel Selectivity (ACS) .............................................................................................................. 168
7.5.1 Test purpose .............................................................................................................................................. 168
7.5.2 Test applicability ...................................................................................................................................... 168
7.5.3 Minimum conformance requirements ....................................................................................................... 168
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 7 ETSI TS 136 521-1 V9.3.0 (2011-01)
7.5.4 Test description ......................................................................................................................................... 169
7.5.4.1 Initial conditions ................................................................................................................................. 169
7.5.4.2 Test procedure ..................................................................................................................................... 170
7.5.4.3 Message contents ................................................................................................................................ 171
7.5.5 Test requirement ....................................................................................................................................... 171
7.6 Blocking characteristics ................................................................................................................................. 172
7.6.1 In-band blocking ....................................................................................................................................... 172
7.6.1.1 Test Purpose ........................................................................................................................................ 172
7.6.1.2 Test Applicability ................................................................................................................................ 172
7.6.1.3 Minimum Conformance Requirements ............................................................................................... 173
7.6.1.4 Test Description .................................................................................................................................. 173
7.6.1.4.1 Initial Conditions ........................................................................................................................... 173
7.6.1.4.2 Test Procedure ............................................................................................................................... 174
7.6.1.4.3 Message Contents .......................................................................................................................... 175
7.6.1.5 Test Requirement ................................................................................................................................ 175
7.6.2 Out-of-band blocking ................................................................................................................................ 176
7.6.2.1 Test Purpose ........................................................................................................................................ 176
7.6.2.2 Test Applicability ................................................................................................................................ 176
7.6.2.3 Minimum Conformance Requirements ............................................................................................... 177
7.6.2.4 Test Description .................................................................................................................................. 177
7.6.2.4.1 Initial Conditions ........................................................................................................................... 177
7.6.2.4.2 Test Procedure ............................................................................................................................... 178
7.6.2.4.3 Message Contents .......................................................................................................................... 179
7.6.2.5 Test Requirement ................................................................................................................................ 179
7.6.3 Narrow band blocking .............................................................................................................................. 180
7.6.3.1 Test Purpose ........................................................................................................................................ 180
7.6.3.2 Test Applicability ................................................................................................................................ 180
7.6.3.3 Minimum Conformance Requirements ............................................................................................... 180
7.6.3.4 Test Description .................................................................................................................................. 180
7.6.3.4.1 Initial Conditions ........................................................................................................................... 180
7.6.3.4.2 Test Procedure ............................................................................................................................... 181
7.6.3.4.3 Message Contents .......................................................................................................................... 182
7.6.3.5 Test Requirement ................................................................................................................................ 182
7.7 Spurious response ........................................................................................................................................... 183
7.7.1 Test Purpose.............................................................................................................................................. 183
7.7.2 Test Applicability ..................................................................................................................................... 183
7.7.3 Minimum Conformance Requirements ..................................................................................................... 183
7.7.4 Test Description ........................................................................................................................................ 183
7.7.4.1 Initial Conditions ................................................................................................................................. 183
7.7.4.2 Test Procedure ..................................................................................................................................... 183
7.7.4.3 Message Contents ............................................................................................................................... 184
7.7.5 Test Requirement ...................................................................................................................................... 184
7.8 Intermodulation characteristics ...................................................................................................................... 185
7.8.1 Wide band Intermodulation ...................................................................................................................... 185
7.8.1.1 Test purpose ........................................................................................................................................ 185
7.8.1.2 Test applicability ................................................................................................................................. 185
7.8.1.3 Minimum conformance requirements ................................................................................................. 185
7.8.1.4 Test description ................................................................................................................................... 186
7.8.1.4.1 Initial condition ............................................................................................................................. 186
7.8.1.4.2 Test procedure ............................................................................................................................... 187
7.8.1.4.3 Message contents ........................................................................................................................... 187
7.8.1.5 Test requirements ................................................................................................................................ 187
7.8.2 Void .......................................................................................................................................................... 188
7.9 Spurious emissions ......................................................................................................................................... 188
7.9.1 Test Purpose.............................................................................................................................................. 188
7.9.2 Test Applicability ..................................................................................................................................... 188
7.9.3 Minimum Conformance Requirements ..................................................................................................... 188
7.9.4 Test Description ........................................................................................................................................ 189
7.9.4.1 Initial Conditions ................................................................................................................................. 189
7.9.4.2 Test Procedure ..................................................................................................................................... 189
7.9.4.3 Message Contents ............................................................................................................................... 189
7.9.5 Test Requirement ...................................................................................................................................... 189
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 8 ETSI TS 136 521-1 V9.3.0 (2011-01)
8 Performance Requirement .................................................................................................................... 191
8.1 General ........................................................................................................................................................... 191
8.1.1 Dual-antenna receiver capability .............................................................................................................. 191
8.1.1.1 Simultaneous unicast and MBMS operations...................................................................................... 191
8.1.1.2 Dual-antenna receiver capability in idle mode .................................................................................... 191
8.2 Demodulation of PDSCH (Cell-Specific Reference Symbols) ...................................................................... 191
8.2.1 FDD (Fixed Reference Channel) .............................................................................................................. 191
8.2.1.1 FDD PDSCH Single Antenna Port Performance (Cell-Specific Reference Symbols) ........................ 192
8.2.1.1.1 FDD PDSCH Single Antenna Port Performance ........................................................................... 192
8.2.1.1.2 FDD PDSCH Single Antenna Port Performance with 1 PRB in presence of MBSFN ................. 195
8.2.1.2 FDD PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) .......................... 197
8.2.1.2.2 FDD PDSCH Transmit Diversity 4x2 ........................................................................................... 199
8.2.1.3 FDD PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) .... 201
8.2.1.3.1 FDD PDSCH Open Loop Spatial Multiplexing 2x2...................................................................... 201
8.2.1.3.2 FDD PDSCH Open Loop Spatial Multiplexing 4x2...................................................................... 203
8.2.1.4 FDD PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) .. 206
8.2.1.4.1 FDD PDSCH Closed Loop Single/Multi Layer Spatial Multiplexing 2x2 .................................... 206
8.2.1.4.2 FDD PDSCH Closed Loop Single/Multi Layer Spatial Multiplexing 4x2 .................................... 209
8.2.2 TDD (Fixed Reference Channel) .............................................................................................................. 213
8.2.2.1 TDD PDSCH Single Antenna Port Performance (Cell-Specific Reference Symbols)........................ 215
8.2.2.1.1 TDD PDSCH Single Antenna Port Performance .......................................................................... 215
8.2.2.1.2 TDD PDSCH Single Antenna Port Performance with 1 PRB in the presence of MBSFN ........... 218
8.2.2.2 TDD PDSCH Transmit Diversity Performance (Cell-Specific Reference Symbols) .......................... 221
8.2.2.2.1 TDD PDSCH Transmit Diversity 2x2 ........................................................................................... 221
8.2.2.2.2 TDD PDSCH Transmit Diversity 4x2 ........................................................................................... 222
8.2.2.3 TDD PDSCH Open Loop Spatial Multiplexing Performance (Cell-Specific Reference Symbols) .... 224
8.2.2.3.2 TDD PDSCH Open Loop Spatial Multiplexing 4x2 ..................................................................... 227
8.2.2.4 TDD PDSCH Closed Loop Spatial Multiplexing Performance (Cell-Specific Reference
Symbols) ............................................................................................................................................. 229
8.2.2.4.1 TDD PDSCH Closed Loop Single/Multi Layer Spatial Multiplexing 2x2 .................................... 229
8.2.2.4.2 TDD PDSCH Closed Loop Single/Multi Layer Spatial Multiplexing 4x2 .................................... 233
8.3 Demodulation of PDSCH (User-Specific Reference Symbols)...................................................................... 237
8.3.1 FDD .......................................................................................................................................................... 237
8.3.2 TDD .......................................................................................................................................................... 237
8.3.2.1 TDD PDSCH Single-layer Spatial Multiplexing Performance (UE-Specific Reference Symbols) .... 238
8.3.2.1.1 TDD PDSCH Single-layer Spatial Multiplexing on antenna port 5 .............................................. 238
8.3.2.1.1.1 Test purpose .................................................................................................................................. 238
8.3.2.1.1.2 Test applicability ........................................................................................................................... 238
8.3.2.1.1.3 Minimum conformance requirements ............................................................................................ 239
8.3.2.1.1.4 Test description ............................................................................................................................. 239
8.4 Demodulation of PCFICH/PDCCH................................................................................................................ 241
8.4.1 FDD .......................................................................................................................................................... 241
8.4.1.1 FDD PCFICH/PDCCH Single-antenna Port Performance .................................................................. 241
8.4.1.1.1 Test purpose .................................................................................................................................. 241
8.4.1.1.2 Test applicability ........................................................................................................................... 241
8.4.1.1.3 Minimum conformance requirements ............................................................................................ 241
8.4.1.1.4 Test description ............................................................................................................................. 242
8.4.1.1.5 Test requirement ............................................................................................................................ 242
8.4.1.2 FDD PCFICH/PDCCH Transmit Diversity Performance ................................................................... 243
8.4.1.2.1 FDD PCFICH/PDCCH Transmit Diversity 2x2 ............................................................................ 243
8.4.1.2.1.1 Test purpose .................................................................................................................................. 243
8.4.1.2.1.2 Test applicability ........................................................................................................................... 243
8.4.1.2.1.3 Minimum conformance requirements ............................................................................................ 243
8.4.1.2.1.4 Test description ............................................................................................................................. 244
8.4.1.2.2 FDD PCFICH/PDCCH Transmit Diversity 4x2 ............................................................................ 245
8.4.1.2.2.1 Test purpose ............................................................................................................................. 245
8.4.1.2.2.2 Test applicability ...................................................................................................................... 245
8.4.1.2.2.3 Minimum conformance requirements ...................................................................................... 245
8.4.1.2.2.4 Test description ........................................................................................................................ 245
8.4.1.2.2.5 Test requirement ...................................................................................................................... 246
8.4.2 TDD .......................................................................................................................................................... 246
8.4.2.1 TDD PCFICH/PDCCH Single-antenna Port Performance ................................................................. 246
ETSI
3GPP TS 36.521-1 version 9.3.0 Release 9 9 ETSI TS 136 521-1 V9.3.0 (2011-01)
8.4.2.1.1 Test purpose .................................................................................................................................. 246
8.4.2.1.2 Test applicability ........................................................................................................................... 246
8.4.2.1.3 Minimum conformance requirements ............................................................................................ 247
8.4.2.1.4 Test description ............................................................................................................................. 247
8.4.2.1.5 Test requirement ............................................................................................................................ 248
8.4.2.2 TDD PCFICH/PDCCH Transmit Diversity Performance ................................................................... 248
8.4.2.2.1 TDD PCFICH/PDCCH Transmit Diversity 2x2 ........................................................................... 248
8.4.2.2.1.1 Test purpose .................................................................................................................................. 248
8.4.2.2.1.2 Test applicability ........................................................................................................................... 249
8.4.2.2.1.3 Minimum conformance requirements ............................................................................................ 249
8.4.2.2.1.4 Test description ............................................................................................................................. 249
8.4.2.2.1.5 Test requirement ............................................................................................................................ 250
8.4.2.2.2 TDD PCFICH/PDCCH Transmit Diversity 4x2 ........................................................................... 251
8.4.2.2.2.1 Test purpose ............................................................................................................................. 251
8.4.2.2.2.2 Test applicability ...................................................................................................................... 251
8.4.2.2.2.3 Minimum conformance requirements ...................................................................................... 251
8.4.2.2.2.4 Test description ........................................................................................................................ 252
8.4.2.2.2.4.1 Initial conditions ................................................................................................................. 252
8.4.2.2.2.4.2 Test procedure .................................................................................................................... 252
8.4.2.2.2.4.3 Message contents................................................................................................................ 252
8.4.2.2.2.5 Test requirement ...................................................................................................................... 252
8.5 Demodulation of PHICH ................................................................................................................................ 253
8.5.1 FDD .......................................................................................................................................................... 253
8.5.1.1 FDD PHICH Single-antenna Port Performance .................................................................................. 253
8.5.1.1.1 Test purpose .................................................................................................................................. 253
8.5.1.1.2 Test applicability ........................................................................................................................... 253
8.5.1.1.3 Minimum conformance requirements ............................................................................................ 253
8.5.1.1.4 Test description ............................................................................................................................. 254
8.5.1.1.5 Test requirement ............................................................................................................................ 255
8.5.1.2 FDD PHICH Transmit Diversity Performance ................................................................................... 256
8.5.1.2.1 FDD PHICH Transmit Diversity 2x2 ............................................................................................ 256
8.5.1.2.2 FDD PHICH Transmit Diversity 4x2 ............................................................................................ 258
8.5.1.2.2.1 Test purpose ............................................................................................................................. 258
8.5.1.2.2.2 Test applicability ...................................................................................................................... 258
8.5.1.2.2.3 Minimum conformance requirements ...................................................................................... 258
8.5.1.2.2.4 Test description ........................................................................................................................ 259
8.5.1.2.2.5 Test requirement ...................................................................................................................... 260
8.5.2 TDD .......................................................................................................................................................... 261
8.5.2.1 TDD PHICH Single-antenna Port Performance .................................................................................. 261
8.5.2.1.1 Test purpose .................................................................................................................................. 261
8.5.2.1.2 Test applicability ........................................................................................................................... 261
8.5.2.1.3 Minimum conformance requirements ............................................................................................ 261
8.5.2.1.4 Test description ............................................................................................................................. 262
8.5.2.1.5 Test requirement ............................................................................................................................ 263
8.5.2.2 TDD PHICH Transmit Diversity Performance ................................................................................... 263
8.5.2.2.1 TDD PHICH Transmit Diversity 2x2 ............................................................................................ 263
8.5.2.2.2 TDD PHICH Transmit Diversity 4x2 ............................................................................................ 266
8.6 Demodulation of PBCH ................................................................................................................................. 268
8.7 Sustained downlink data rate provided by lower layers ................................................................................. 268
8.7.1 FDD .......................................................................................................................................................... 269
8.7.1.1 FDD sustained data rate performance ................................................................................................. 269
8.7.1.1.1 Test purpose .................................................................................................................................. 269
8.7.1.1.2 Test applicability ........................................................................................................................... 269
8.7.1.1.3 Minimum requirements ................................................................................................................. 269
8.7.1.1.4 Test description ............................................................................................................................. 271
8.7.1.1.5 Test requirement ............................................................................................................................ 273
8.7.2 TDD .......................................................................................................................................................... 274
8.7.2.1 TDD sustained data rate performance ................................................................................................. 274
8.7.2.1.1 Test purpose .................................................................................................................................. 274
8.7.2.1.2 Test applicability ........................................................................................................................... 274
8.7.2.1.3 Minimum requirements ................................................................................................................. 274
8.7.2.1.4 Test description ............................................................................................................................. 276
ETSI
