Table Of ContentELECTROMECHANICAL CONTROL TECHNOLOGY AND TRANSPORTATION
IICCEECCTTTT__BBooookk..iinnddbb ii 44//1111//22001177 99::3344::1122 AAMM
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTROMECHANICAL
CONTROL TECHNOLOGY AND TRANSPORTATION (ICECTT 2017), 14–15 JANUARY 2017,
ZHUHAI, CHINA
Electromechanical Control Technology
and Transportation
Editors
Xiaoling Jia
Tongji University, Shanghai, China
Feng Wu
Wuhan University, Wuhan, China
IICCEECCTTTT__BBooookk..iinnddbb iiiiii 44//1111//22001177 99::3344::1188 AAMM
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2017 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4YY
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-06752-3 (Hbk)
ISBN: 978-1-315-15857-0 (eBook)
IICCEECCTTTT__BBooookk..iinnddbb iivv 44//1111//22001177 99::3344::1188 AAMM
Electromechanical Control Technology and Transportation – Jia & Wu (Eds)
© 2017 Taylor & Francis Group, London, ISBN 978-1-138-06752-3
Table of contents
Preface xi
Organizing committees xiii
Mechanical manufacturing system and automation
Experimental research on the catalytic synthesis of hydrocarbon fuel from Jatropha curcas oil 3
Y.B. Chen, Y.J. Hao, Y.Y. Zhao, S.P. Yang, Y.N. Gao, D. Souliyathai, J.C. Du & A.M. Zhang
Measurement of the lithium battery internal resistance using the sampling integral method 9
J.A. Lou & D.J. Yang
The influence of fiber angle on the mechanical performances of a composite cylindrical part 13
H.J. Gao, Y.D. Zhang, Q. Wu & W.B. Zhou
SmartFES: Reliable retreat route selection and navigation for indoor firefighters using exit signs 17
J. Tang, Z. Zhang, D.S. Yang, Y. Huang, L. Hu, Z.G. Zhao & H.C. Liu
A new detection method for short-circuit current based on a combination of criteria 25
Q. Wu, S.H. Ma, Z.Y. Cai, W.C. Wu & Z.J. Ni
Study on high-temperature characteristics of a 1200 V 40A SiC JBS diode 31
L. Wang, R.H. Huang, A. Liu, G. Chen & S. Bai
Thermal design and simulation analysis of rectifier cabinet for nuclear power generating stations 35
Q. Yin, Z.-C. Xiong, C.-T. Zhu, Y.-F. Wang & R.-H. Li
Design of supplementary excitation damping controller for damping SSR based
on projective theorem 39
D.P. Xu, L. Li, L.M. Zhao, S. Chen & K. Li
Analysis of the loss in the region of damper winding in a large tubular hydro-generator
by 3D electromagnetic field calculation 45
D.-W. Zhang, J. Zhang, W.-J. Li & Z.-N. Fan
Loss and heat calculation of damper winding in a damper winding shifted 600 MW
large hydro-generator 49
D.-W. Zhang, J. Zhang, W.-J. Li & Z.-N. Fan
Design and implementation of feeder automation 53
P.H. Liu
Distance protection operation characteristics analysis of the AC/DC system based
on MMC-HVDC interconnection 57
M.L. Tang, R. Yu, X. Zhang, C. Xiao, J.X. Ouyang & X.F. Xiong
Research on the impact of generator tripping considering wind power participating
in frequency regulation 65
J.F. Shi, G.C. Zhao & C. Wang
Research on the credit risk of direct trade and countermeasures of large power users 73
C. Ma, L. Guo, Z.C. Yu, L. Wang, Z.Q. Zhao & G.J. He
Application and simulation of active disturbance rejection technology in distributed
power supply control 77
F. Ou, H.J. Xiong & D.M. Lei
v
IICCEECCTTTT__BBooookk..iinnddbb vv 44//1111//22001177 99::3344::1188 AAMM
Research on vector control system of SMC material transverse-flux PMSM 81
B. Cui, Y.L. Xu, Y. Zhang & W. Yin
Current control of LCL grid-connected inverter based on ADRC 89
J. Sun, H.J. Xiong & D.M. Lei
Design and application of cold water storage technique for a foreign-related oil
fuel power plant project 93
D.C. Yan, Q. Xu & Z.Y. Gu
Research on software requirements dependencies 101
Y.Q. Yan
LQR based optimal voltage control of rural electric power grid with high penetration of PVs 107
C. Zhang, Z.Q. Deng, J. Zhou, H.F. Bian, A.N. Xiao & W.X. Zhang
Overvoltage analysis and suppression in the double-neutral section electrical sectioning device 111
Y.X. Liu & G.H. Liu
Control strategy of a car component stiffness test based on RBF neural network PID 115
Z.M. Wang & Y.H. Yan
A new preference-based model to solve the cold start problem in a recommender system 121
K. Liu, W. Liu & X.Y. Chen
Low-power single-supply stimulator based on Cortex-M0+ 127
Y. Sun, L. Liu, H. Gao, K. Xu, L. Qin & S. Ye
Combining carrier-phase and Doppler observations for precise velocity estimation
with a stand-alone GPS receiver 133
F. Li, Q. Li & W. Qi
Research on the influence of non-scene factors on visual-based loop closure detection 139
Z.H. Zhang & R.F. Dong
Analysis of residential electricity consumption behavior based on the improved Apriori algorithm 145
B. Zhang
Triaxial test analysis of flax fiber Xigeda soil 151
Y.H. Liang, J. Wang, K.C. Chen & J. Zhang
Study on the control measures of the loose accumulation body slope 155
F. Wang & B.Y. Chen
Analysis of an allocation plan for urban complex air conditioning cold and heat sources
in Changchun 161
Y.D. Zhu, C.Q. Wang & H.B. Li
Analysis of the effect of the solar cell layout in photovoltaic greenhouses 167
Z.W. Ge & Y. Li
Review of the space requirements for environmental protection 173
A.L. Cai, R. Wang & B.J. Sun
Analysis of the light hydrocarbon recovery rate in the negative pressure crude stabilization system 179
H.S. Bi, H.X. Wang, J.F. Chen, X. Zhang & D.D. Hu
Control strategy optimization and experimental study on startup of range extender
for extended range electric vehicles 185
L.M. Wang, Z.H. Song, S.M. Wang, D.H. Yi, Y.Y. Wei, Z.Y. Zhang & J.L. Zhou
Application of metal additive manufacturing in shipping and marine engineering 191
C. Chao, L.M. Liu & J.M. Xu
Research of assembly line balance at F company decelerator 197
W. Jiang, Y.H. Ma & X.Y. Zhu
Fractal study on the surface topography of shearing marks based on the double spectrum method 201
B.C. Wang, C. Jing & L.T. Li
vi
IICCEECCTTTT__BBooookk..iinnddbb vvii 44//1111//22001177 99::3344::1188 AAMM
Research on the end effect of the linear phase-shifting transformer 205
X. Xiong, J.H. Zhao, H.B. Ding, P. Sun & W. Peng
A method of building a high-precision landmark library for landmark navigation 211
D.L. Zhang & B. Yang
Design of a wireless power supply electromagnetic coupler for the underwater unmanned vehicle 219
P. Sun, J.H. Zhao, X.S. Wu, W. Gao & P. Jiang
A nonlinear time–frequency analysis method for the low probability of interception 223
H. Xu & F.L. Zeng
Research on the fault diagnosis of the high-voltage circuit breaker based on the feature
extraction of the stroke signal 227
K. Zhao, H.T. Li, J.G. Yang, Y.Y. Jia, D.G. Li, J.W. Wu, S.L. Ma, Y. Feng, C.T. Liang & X.L. Feng
Fault diagnosis for thin-walled rolling bearing based on EEMD and TKEO 237
X.D. He & M. Qiu
Equipment technology research on profile controlling and oil displacement in the frigid zone
of the Erlian region 241
J. Wang, J. You, M. Bin, J.L. Hu, P. Li & S.C. Wang
An efficient and reliable meter registration method for the power information collection system 245
Z.X. Wu, W.F. Wang, X.Q. Liu & L.N. Zhang
Research on the optimal capacity configuration of the energy storage system for an electric
vehicle fast-charging station 255
R.M. Yuan, Q.Q. Li, K. Zhong, Z.Y. Jiang, Q.D. Yin & W.G. Zhang
Optimal control for dry dual clutch overlap operations during torque phase in shift 261
M.X. Wu
A nonlinear programming method for solving LCCL resonant structure parameters 267
J.X. Gao, X.S. Wu, W. Gao, W. Peng & X. Xiong
Sliding rate analysis of the single loop CDSV transmission system 273
B.F. Zhang, Y.H. Cui, M.R. Wang & K. Liu
Research on the power conversion circuit of a single-phase AC input PMSM control system 279
Y. Zhang, B. Cui, Z.X. Wang & X. Huang
Signal processing and computer science
Optimization study on the coal powder conveying system of utility boilers 287
F.S. Liu, J. Zhao & S.G. Hu
Attack detection technology based on depth feature representation 293
J.D. Liu
Research on classification and recognition of Peking opera facial images based on SIFT
features and support vector machine 297
P. Zhang, Q. Zhu & Z.-Q. Wang
Sparse fast Fourier transform implementation on multicore DSP 301
Y.F. Liu, H.H. Gong & Y.H. Zhou
A hybrid level-of-detail modeling and rendering approach for the visualization of large-scale urban scenes 305
Z.H. Zhang, H.Y. Wang, Z.B. Hu, J.Y. Zhang & S.C. Zhou
Study on quantitative terrain analysis based on DEM 311
M. Jiang, H.T. Wei, W.T. Sun, J.T. Wang & J.Z. Liu
A novel interest point detector based on convolutional features with unsupervised feature learning 317
Q. Jia, X.D. Wang & L.E. Zhou
Frame extraction method for indoor scene images 323
Y. Liu, Q.J. Wei & Y. Qian
vii
IICCEECCTTTT__BBooookk..iinnddbb vviiii 44//1111//22001177 99::3344::1188 AAMM
Design of a modified particle analyzer for the automatic identification of the globular
foam’s boundary 329
J.J. Xia, X.C. Fu, Z.M. Bao, T. Chen, X.Z. Zhang, Y. Chen, R.J. Wang, C. Hu & L.S. Jing
Application of wireless detection technology in the evaluation of the load-carrying capacity
of offshore workover derrick 335
Y.B. Qian, H.W. Zhu, W.X. Wu, J. Hua & D. Feng
Visualization of the trade information of agricultural products 341
J.Q. Hou & F.C. Wan
Research and design of multilingual agricultural e-commerce logistics information
management system 345
S. Dai, N. Ma, Y.-R. Cao & J.-J. Li
Codebook design based on the particle swarm algorithm 349
B.Y. Qu & Y. Qian
New lossless compression method for BMP true color images 355
Z.Z. Ma & Y. Wan
Research and implementation of an image compression scheme based on the BTC algorithm 361
Y.-Q. Zhang & Y. Qian
Research on a plan of making suburb leisure tourism suitable for characteristics of the western
Sichuan forest district—taking Sichuan Xinjin Huayuan Town as an example 367
P.C. Xiang, T.Y. Du & H.Y. Gu
A novel distributed control strategy for VSC-MTDC 373
G.Q. Sun, Y.P. Zheng, Z.N. Wei, Y. Yuan & Z.J. Lin
Cyber-attack feature processing approach based on MA-LSSVM 379
Y.Y. Ma & G.F. He
Design of remote smart home control system based on the internet of things 387
Y.J. Che
Risk evaluation and method of complex information system 391
Z. Guo & H. Wang
Development and application of the load simulation software for shearer drum 397
R. Zeng, Y. Zhang, J.K. Sun & J. Li
Advantages and disadvantages of FBG sensors and strain gauges in the pullout test
of GFRP soil nails 401
Z. Song & H.W. Zhu
Research on the sport city model—based on data of outdoor activities 407
Q.H. Qin, Y. Luo & Y. Liu
An improved algorithm of trend surface filtering based on the natural neighboring points range 415
Z.H. Zhang, R.C. Peng, W.Q. Huang & J. Dong
Research on dynamic energy consumption-aware task scheduling of computing resources
in the cloud platform 421
H.-K. Zhou & M.-D. Gu
A classification method for artistic images on feature computation 425
R.S. Xu, Z.X. Sun & C. Ma
Research and design of the paperless electronic business card 431
G.L. Peng, T. Shen, S. Jiang, S.B. Wang & W. Li
Research on the optimization method of the purchasing plan for fresh product e-commerce 435
X. Wang, J. Sun & K. Chen
The CS-OMP estimation algorithm for OFDM-based LV-PLC channels 441
R.M. Yuan, J.L. Guo, Z.Y. Jiang, X.W. Wang & S.S. Ma
viii
IICCEECCTTTT__BBooookk..iinnddbb vviiiiii 44//1111//22001177 99::3344::1188 AAMM
Application of information technology in the digitalization construction of an animation library 447
Y.L. Tang
Teaching android development class for noncomputer majors 451
A.B. Wang
Assessing the impact of design intent 3D annotations on model reusability 457
Q.Y. Ma, L.H. Song, D.P. Xie, M.J. Zhou & H.H. Jin
A CAE intelligent assisted system 461
Q.Y. Ma, D.P. Xie, L.H. Song, M.J. Zhou & J.L. Shi
Research and design of a random encryption scheme based on ECC and RSA 465
S. Zhang
Discussion of an e-commerce platform for shipping logistics enterprises 469
Y.-L. Li, H.-P. Wang, P.-X. Tong & X.-Q. Sun
A genetic fuzzy classification system based on computing with words 473
H. Ji & M. Ma
Error analysis and accuracy of a 6-DOF parallel manipulator 477
X.Y. Sun, Y.T. Zhao & D.L. Zhang
Traffic and transportation
A case study on the traffic impact evaluation of building constructions 483
W. Yang
Study on the design and protection of a subgrade side slope in the distribution area of loose
accumulation bodies 487
B.Y. Chen & F. Wang
Traffic investigation of urban intersections 493
C.X. Zhu & T.Y. Wang
An experimental study on the fire extinguishing characteristics of water mist and compressed
air foam in a railway tunnel rescue station 497
K. Yao, W.F. Liu, W.P. Han, J.J. Xia, Y. Liu & S. Zhong
A numerical study on heat release rate in a multichannel parallel test system for smoke spillover
from the tunnel rescue station 503
Y. Liu, W.F. Liu, W.P. Han, J.J. Xia, K. Yao & S.Y. Zhong
Design and application of a model carriage for a fire characteristic test 509
W.P. Han, X.Z. Zhang, J.J. Xia, B.J. Yang, C. Hu, Y. Chen, L.S. Jing, Z.M. Bao,
L.W. Tian, D.X. Yu, R.J. Wang, W.F. Liu, S.Y. Zhong, Y. Liu & K. Yao
Author index 515
ix
IICCEECCTTTT__BBooookk..iinnddbb iixx 44//1111//22001177 99::3344::1188 AAMM
