diy arcade games list

106 Pages·2017·6.26 MB·English

build your own arcade
diy arcade games list
manual
www.diyarcade.com
www.facebook.com/diyarcade
Table of Contents
1 USB ARCADE 11 What Should The Buttons Look
Like Afterwards?
1 Pin Layouts
13 Deciding on the COIN-IN system
2 Wiring the buttons
Connecting Buttons 13 Free Play
2 What Should The Buttons Look Like 14 Arcade Button(s)
Afterwards?
16 Connecting the AMP and
3 Wiring the Joystick Speakers
4 Coin-In Arcade Button 16 Connecting up the Amp
4 Testing your Joystick and Buttons. 17 Connecting the JAMMA PCB
Windows 7 to the JAMMA Harness
5 Windows XP

JAMMA ARCADE Ultimate kit DIY ARCADE GAMES LIST
19 19 in 1 Games List
6 Safety Information
Electrical Safety 20 60 in 1 Games List
7 Wiring the Arcade Power Supply 21 138 in 1 Games List
7 Directly wiring and Arcade Power 23 161 in 1 Games List
Supply
24 412 in 1 Games List
8 Wiring the Power Socket
32 621 in 1 Games List
9 Wiring the JAMMA harness to PSU
41 645 in 1 Pandora 4 Games List
10 Sorting the JAMMA Harness wires
47 1033 in 1 Games List
11 Wiring the buttons
62 2100 in 1 Games List
11 Wiring the 6th Button
94 680 in 1 Pandora 4s Games List
USB ARCADE
Version 1.0
Pin Layouts
www.diyarcade.com 1
Wiring the buttons
Connecting Buttons
1. Connect COM to ground Bundle
2. Connect NO to the Up/down/left/right btn1/btn2 etc..
3. Repeat steps 1 to 2 to connect the rest
What
What Should The Buttons Look Like
Afterwards?
Once the buttons are connected, the wiring should look something like this,
notice the ground wire daisy chains from microswitch to microswitch.
2 www.diyarcade.com
Wiring the Joystick
Wiring the joystick micro switches are the same as the buttons, see below
diagram for directions.
www.diyarcade.com 3
Coin-In Arcade Button
Player 1 Coin-In
Connect the black Coin-In button to the player 1 bundle, Later you’ll map this
as the Coin-In button.
Testing your Joystick and Buttons.
Windows 7
Go to Start Control Panel
7
● Search for USB
● Select “Setup USB game Controllers”
● Click Properties
● Select TEST tab
● Play around with buttons and joysticks and it should show you on screen.
4 www.diyarcade.com
Windows XP
● Go to Start 7 Control Panel
● Under Install game controllers click the controller and select
properties.
www.diyarcade.com 5
JAMMA ARCADE Ultimate kit
Version 2.0
Safety Information
Electrical Safety
!!WARNING!! Working with 240volts is dangerous please get a fully qualified
electrician to wire this, 240volts CAN KILL !!WARNING!!
6 www.diyarcade.com
Wiring the Arcade Power Supply
Depending on the kit you’ve purchased there are two ways to connecting the
Arcade Power Supply. The first way is directly wiring in a power cable and the
second is using a power socket with fuse to the Arcade Power Supply.
Directly wiring and Arcade Power Supply
!!WARNING!! Working with 240volts is dangerous please get a fully qualified
electrician to wire this, 240volts CAN KILL !!WARNING!!
1. Get a 10 amp Rated Power cord (i.e. extension cord)
2. Strip and expose the wires , Allowing enough length to reach the power point.
3. Connect the wires to the screw down as shown in the diagram below
www.diyarcade.com 7
Wiring the Power Socket
!!WARNING!! Working with 240/110volts is dangerous please get a fully
qualified electrician or contractor to wire this, 240/110volts CAN
KILL !!WARNING!!
Wire the socket as shown below then connect the following
Power Socket Arcade Power Supply
Ground FG
Active AC 1
Neutral AC 2
8 www.diyarcade.com