complete solution for your ammo lifecycle

28 Pages·2015·4.34 MB·English

MSM GROUP
CHEAPER FASTER BETTER: COMPLETE SOLUTION FOR YOUR AMMO LIFECYCLE
AMMO: SALES | DEVELOPMENT | PRODUCTION | REVISION | MODERNIZATION | ECOLOGICAL LIQUIDATION
DEFENCE TECHNICS: DESIGN AND DEVELOPMENT | PRODUCTION | SERVICE | MODERNIZATION | SALES
ABOUT US
MSM GROUP
MSM GROUP Ltd. was established in 2015 by transformation of MSM Martin Ltd., which The resources and the competence to cover whole ammo life cycle:
dealt with construction, development, production and sales mainly with military material.
1. Development of the product and the production process included complete documentation
MSM Martin Ltd. was founded in 2004 on the base of MSM Ltd. In next years the MSM
2. Engineering construction of product including the prototype production and the pre-
Martin Ltd. took over several military companies located in the middle of Slovakia, and built
serial testing
on its traditional manufacturing activities in military and civil production.
3. Production line, tools and jigs engineering construction, and production
Due to ZVS company inclusion into the group structure we can state that the origin of 4. Production of various types of small, middle and large caliber ammunition and associated
MSM GROUP Ltd. comes back to 1927 when then Škoda Works in Plzeň, as a monopoly charges, fuses and primers for guns and cannons. Deliveries with all of necessary
producer of ammunition technics decided to build so called „spare factory“ in Slovakia. The documentation, and certificates
company was totally destroyed during the World War II, and it took several years while the 5. Services during the ammo life cycle: Testing, Revision, Modernization, Life cycle
production was restored to such extend, that its products were supplied not only for the prolongation, Disassembly, Ecological disposal
Ministry of National Defense, but for many countries worldwide as well. 6. In the case also the production line development, production and the transfer with whole
Today the MSM GROUP Ltd. makes use of rich experiences from the past and know-how necessary technical support to customer plant
of highly qualified workers and vast archive of technical documentation for all necessary 7. Services for military vehicles including the diagnostics (Tanks, Armoured vehicles, Self-
procedures. propelled gun systems, ...)
In 2009 the biggest Czech military holding EXCALIBUR ARMY entered MSM as a co-owner.
Design, development, manufacturing and servicing of the radio navigation systems (NDB) for
air traffic control. Repairing and modernization of various kinds of Armed Forces equipment
Why to cooperate with us:
in the segment of air defence equipment.
More than 70 years experiences in the ammunition development, production and complete
services in this field.
More information at www.msm.sk
Long tradition in the MSM locations for the ammunition production processes with significant
effects as the deep skilled personal, support industries, development fields, education etc.
2 MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk
SCOPE OF FIELD
Ammo Production and Industry:
ZVS Dubnica nad Váhom: Production of various types of small, middle and large caliber
SNINA
ammunition and associated charges, fuzes and primers for guns and cannons. Also transfer DUBNICA NNADNVÁHOM
of technology for production, testing and assembly of the ammunition including variety of
components.
Bratislava
Industry production of welded construction, metal and metal sheet processing and also the
transformators production.
Ammo Services:
MSM Nováky: Aimed at the ammunition area
production covered whole ammo life cycle including the
life cycle prolongation and the testing.
NOVÁKY
Technological possibilities with munitions
1. Delaboration and disposal Bratislava
2. Repair and revision (extension of life cycle)
3. Live, training and drill ammunition manufacturing
Military vehicle service:
MSM Trenčín: Welding, assembly and finalization of
vehicles cabine, mainly the TATRA trucks.
TRENČÍN
Complete service for military vehicles includes the
diagnostics (Tanks, Armoured vehicles, Self-propelled Bratislava
gun systems, ...)
Electronic Industry:
MSM Banská Bystrica: Design, manufacturing and BANSKÁ bBYSTRICA
servicing of the radio navigation systems (NDB) for air
traffic control (civil and military) as well as repairing
Bratislava
and modernization of various kinds of Armed Forces
equipment, especially in the segment of air defence
equipment.
Another important product of the portfolio is own development and production of
Ground Power Unit (GPU) for the aircraft starting.
MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk 3
AMMO PRODUCTION – 7,62 CALIBER
Live ammunition 
7.62-43
Sharp charge of with normal bulet. The charge consists of cartridge cases, primers,
powder charge and bullet. The weight is 16.5 grams ammunition, bullet weight
8.05 g, maximum range of 2,800 meters. 
Special ammunition 
7.62-43 Sv 
Luminous, the illuminating missile contains Il. composition. The charge is indicated
by a green tip on bullets. 
7.62-43 PZ
Penetrating incendiary charge. It is marked with a black tip and a red stripe on bulet.
7.62-43 Z 7.62 x 39 blank
Incendiary charge. It is marked with a red tip on bulet.
Training Ammunition 
Cartridge 7.62 x 39 BLANK has wide aplication for training purposes and for acoustical
MSM Martin, s.r.o. , Thurzova 16, 036 01 Martin, Slovak Republic, www.msm.sk
effects.
7.62-43 Cv
Used for training and imitation shooting. It consists of cartridge cases, primers and
smokles powder. The Charge does not have missiles.(bulet).  Technical data:
7.62-43 Red  Caliber 7.62 x 39 mm
Reduced charge for shooting at shorter distances. The maximum range 1100 meters.
Cartridge length 48.2 mm
Charge has pistol bulet and quantity smokles powder is reduced. It is marked with
a white tip.  Cartridge weight max. 10.4 g
Cartridge case Brass CuZn30
7.62-43 RedSv
Reduced and luminous. It is marked with a green tip and a white stripe.  Primer type Berdan
Propellant type Single base powder
7.62-43 Šk
School charge for training. Rehearses the charge, discharge activity with container, Packages Retail paper box = 130 pcs
slide and trigger. It is only an imitation sharp ammunition. Does not contain
any smokeless powder or incendiary compound. It is marked with longitudinal Technical data:
overpresses on the body of the cartridge.
Cartridge 7.62 x 39 SA-58, AK-47, etc.
Cartridge 7.62 x 39 AP-T SA-58, AK-47, etc.
Cartridge 7.62 x 39 AP SA-58, AK-47, etc.
Cartridge 7.62 x 39 Practice SA-58, AK-47, etc.
Cartridge 7.62 x 54R Machine gun RPK, PKT, AKM UK-59
4 MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk
AMMO PRODUCTION – 9 mm LUGER
Full metal jacket bullet
with lead core
9.0 g
8.0 g
7.5 g
Brass case with powder
charge and primer
The 9 x 19 mm LUGER has become the most popular caliber for law enforcement agencies
and modern sports shooting, because of wide range of self-loading compact pistols and
sub-machine guns with large magazine capacity of such ammunition.
9 mm Luger
Important factor, that contributing to the increasing popularity of such caliber, is low price
compared to other calibers and availability.
The 9 mm Luger cartridge combines a flat projectile trajectory with moderate recoil.
Technical data: Together with sufficient wounding effect it makes an ideal cartridge for sports shooting
or self-defense.
Bullet 7,5 g / 115 grs 8,0 g / 124 grs 9,0 g / 139 grs
Bullet type FMJ RN FMJ RN FMJ RN 9 mm Luger – case
Length (mm) 29.69 29.69 29.69
The caliber 9 x 19 mm CuZn30 case is intended for inserting the
Velocity (m.s-1) - v 370 360 320 powder charge, primer and bullet.
0
Kinetic energy (J) - E 513 518 461 9 mm Luger – bullet
0
Velocity (m.s-1) - v 365 355 312
5 The full metal jacket bullets with lead core are produced in weight 7,5 g / 8,0 g / 9,0 g. The
Kinetic energy (J) - E 500 504 438 jacket is made from CuZn30 and the bullet core is made from Pb 99,5.
5
Test barrel length (mm) 285 285 285
9 mm Luger – bullet
Cartridges per box (pcs) 50 50 50
Weight (g) 7.5 8.0 9.0
Boxes per carton (pcs) 20 20 20
Height (mm) 15.0-0.4 15.4-0.4 16.6-0.4
Carton weight (kg) 12.7 13.2 14.2
Diameter (mm) 9.02-0.02 9.02-0.02 9.02-0.02
Material Lead core Pb 99,5 / Bullet jacket CuZn30
MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk 5
AMMO PRODUCTION – HAND GRENADES, PYROTECHNIC COMPOSITIONS
Production of Training
URG-86
Grenades URG-86
1. Primers
URG-86 is universal hand-grenade, designated for Reduced Universal Hand Grenade (URG-86-Rd) is Primers are used to ignite the spotting and powder charges.
antipersonell pruposes. Grenade is consists of basic parts: destined for the grenade usage training at the army. By They are initiated by firing pin percussions onto bottom
Plastic body of Grenade, combined fuze (which enables the its design the reduced grenade responds to a live grenade of the primer. They consist of brass anvil into which cup
explosion following the impact or after time period of 3.2 specified for the military application. In term of the output with percussion priming composition is moulded. Crimped
– 4.6 seconds after the activation of the fuze), PL-U-EP 14 the effect of the reduced grenade is considerably lowered. priming composition in the cup is covered with tinfoiled
filling and shards. The function of URG 86 is secured even Only the booster (primer) output is used at the grenade disc.
in case of adverse climatic conditions in the range between explosion
-50°C to +50°C. 2. Igniters
Universal Hand Grenade Training (URG-86-Šk) is
intended to theoretical military units education. It is the
maquette. „Šk“ means „Školný“ (School). The body and Igniters serve for igniting the detonators or delay elements
the fuse of the maquette are black instead of green, and in artillery ammunition fuzes. They are initiated by sharp
Technical data: there is on the fuse the red cross marking. needle injecting. They consist of copper cup, into which the
stabbing priming composition of cooper cover is molded.
Weight 440 g
3. Detonators
Lenght 117 mm
Diameter 60 mm Detonators serve for initiating the explosives. They consist
of aluminium cup and cover, primary and base charge.
Filling PL-U-EP 14
Primary charge consists of two primary explosives and
Filling weight 43 g secondary charge consists of high explosive. Ignition hole
on the cover is closed by silk cloth disc
6 MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk
AMMO PRODUCTION – 30 MM CALIBER

30 mm Ammunition
30 mm HE-T
Production program of 30 mm ammunition features following types of rounds:
(High-Explosive round with Tracer)
30 mm AP-T
is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for defeating
ground and air targets by bursting effect of the projectile at the range up to
(Armour Piercing round with Tracer)
3,000 meters. The impact fuze has also a self-destruction function.
Legend:
is designed for firing from 2A42, 2A38 and 2A72 guns for engaging light-
1. Shell body, 2. Steel cartridge case, 3. Impact fuze, 4. Bursting charge
armored ground and air targets. 5. Propelling charge, 6. Priming screw, 7. Tracer, 8. Driving band
Legend:
1. Shell body, 2. Steel cartridge case, 3. Ballistic cap
30 mm HE-T PRACTICE
4. Tracer, 5. Propelling charge, 6. Priming screw
7. Decopperizer, 8. Driving band
(High-Explosive Practice round with Tracer)
30 mm HE-I
is designed for practice firing from 2A42, 2A38 and 2A72 guns against
(High-Explosive Incendiary round) ground and air targets. The projectile is equipped with two fuzes. Both
fuzes have self-destruction function only. The self-destruction occurs within
an interval of 5,5–9,5 seconds after fire. Splinters of the projectile do not
is designed for firing from 2A42, 2A38 and 2A72 guns. It is used for
exceed range of 5,000 meters.
defeating ground and air targets by incendiary effect induced by the shell
splinters after a target has been engaged and its explosive charge activated. Legend:
The impact fuze has also a self-destruction function, which is activated in 1. Shell body, 2. Steel cartridge case, 3. Front self-destructive fuze
4. Bursting charge, 5. Bottom self-destructive fuze , 6. Propelling charge
case of missing the target.
7. Priming screw , 8. Tracer, 9. Driving band
Legend:
1. Shell body, 2. Steel cartridge case, 3. Impact fuze
4. Incendiary charge, 5. Propelling charge, Packing:
6. Priming screw, 7. Driving band
Number of rounds in metal sheet case pcs 18
Dimensions of metal sheet case mm 325 x 230 x 127
Technical data: Weight of full metal sheet case kg 17
Number of metal sheet cases in wooden box pcs 3
AP-T HE-I HE-T HE-T PRACTICE
Dimensions of wooden box mm 875 x 398 x 206
Caliber (mm) 30 30 30 30
Weight of empty wooden box kg 8.7
Weight of round (kg) 0.858 0.835 0.835 0.835
Weight of full wooden box kg 60
Lenght of round (mm) 288.5–291.8 288.5–291.8 288.5–291.8 288.5–291.8
Number of wooden boxes on pallet pcs 15
Muzzle velocity (m.s-1) 970 960 960 960
Dimension of pallet mm 1.200 x 800 x 1.100
Min. burning time of tracer (s) 3.5 – 9.0 4.5
Weight of full pallet kg 930
Self-destruction time (s) – 9.0–14.0 9.0–14.0 5.5–9.5
u 4C1/Y65/year of production SK/1003M/
Type of priming screw percussion Packing code
n TSU104000095/10R
Impact, self- Impact, self-
Fuze – 2x self-destructive only Hazard Class ADR 1.2 F
destructive destructive
MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk 7
AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21
122 mm Rocket „GRAD“ for RM-70 / BM-21
Technological line for inspection of artillery rockets 122 mm JROF RM70 is designed for
repair, modernization and inspection in order to extend the life.
At the inspection procedures is performed:
– modernization, which is caused by the requirement to increase the safety of rockets and
resistance against unintentional initiation of induction or action of static electric charges
– replacement of damaged parts, which affect its function, internal and external ballistics
– check of alignment of centering ring and the warhead, high of locating pin, position of
locating pins to the longitudinal axis, position of the contact cap, geometry of the open
stabilizer, circuit and resistance of rockets, air tightness of the tin for fuses
– complete repair of packages
Technical data:
MSM Martin, s.r.o. , Thurzova 16, 036 01 Martin, Slovak Republic, www.msm.sk
Caliber 122 mm
Lenght of missile with fuze 2867.31–2882.60 mm
Weight of missile with fuze 66.6–66.75 kg
Max. range 20.4 km
Min. range 3 km
Type of the warhead High Explosive (HE) Warhead
Fuse MRV-U Impact fuse (with immediate, short and long delay)
Rocket motor Double-based solid propellant
Weight of the rocket motor 48.2 kg
Weight of the propellant 20.5 kg
Color silver
Limits of temperature
Storage -40°C / +60°C
Fire -32°C / +50°C
Packing One rocket and one fuze in each box
8 MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk
AMMO PRODUCTION – 122 MM ROCKET „GRAD“ FOR RM-70 / BM-21 – MODERNIZATION
Engine Modernization Fuse Modernization
Basic version range: Basic version fuse: Impact fuse (with immediate, short and long delay)
Max: 20.4 km
Min: 3 km Possibility for fuse modernization:
Product name: Forad-1
Possibility for engine modernization:
Operation regime: Proximity & Impact as the option
36 km (over sea)
Max. range
Initiation process: Mechanical (Impact, Delayed) / Electrical)
40 km (in 600 m altitude)
h=1÷30 m
16 km (over sea) Height of explosion:
Min. range Regular settings in 2 levels:
h=1÷15 m
21 km (in 600 m altitude)
Fuzes are protected against specific electric defense
equipment
Protection:
Warhead Modernization Fuzes will not be activated by clouds, fog, storm or
sandstorm.
Operational temperatures: -40°C ÷ +50°C
Basic warhead: High Explosive (HE)
Min. 10 years – if stored in original package and all
Lifespan:
Possibilities for warhead modernization: storage conditions are met.
Number of fragments (shrapnels): 1050 pcs
Warranty for technology and equipment: 2 years
HEAP Armour penetration:
Radius = 15 m Thickness 10 mm
Warranty for rockets:
Radius = 32 m Thickness 6 mm
Lifespan is prolonged by 5 years (from 10 years to 15 years)
Number of fragments (balls): 9100 pcs In the case of modernization the lifespan is prolonged by 10 years
Fragments density (pcs/m2) at lethal radius: Revision costs are aprox. 1/3 of total costs of provision of new rockets
HEF R = 7 m 118.1
R = 15 m 34.6
R = 20 m 21.5
R = 40 m 4.6
122 mm HEF 122 mm HEAP
MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk 9
Possibilities for the Modernization of 122 mm Rockets for RM-70
AMMO PRODUCTION – 122 MM ROCKET „GRAD – MODULAR“
MODULAR
Improved system of Launcher designed for multiple use of 122 mm JROF.
MODULAR container loaded with 122 mm missiles can be transported on carriage body of vehicle, or snuged on RM 70/85 MODULAR rocket launcher and is suited for air
and naval transport.
It is possible to launch 122 mm JROF and 122 JROF-M missiles directly from container. Contains 28 pcs of missiles. 
– Loads and unloads using built-in crane
– Automatic identification of type of rocket
– Operation from inside the crew cabin
– Autonomous mission capabilities
– Air – transportability
10 MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk MSM GROUP, Kasárenská 8, 911 05 Trenčín, Slovak Republic, www.msm.sk