Ceramic materials for energy applications. IV : a collection of papers presented at the 38th International Conference on Advanced Ceramics and Composites, January 27-31, 2014, Daytona Beach, Florida

177 Pages·2015·29.323 MB·English

by  Hua-Tay Lin, Yutai Katoh, Josef Matyas, Andrew L. Gyekenyesi, Michael Halbig

Ceramic Materials
for Energy Applications IV

Ceramic Materials
for Energy Applications IV
A Collection of Papers Presented at the
38th International Conference on
Advanced Ceramics and Composites
January 27–31, 2014
Daytona Beach, Florida
Edited by
Hua-Tay Lin
Yutai Katoh
Josef Matyáš
Volume Editors
Andrew Gyekenyesi
Michael Halbig
Copyright © 2015 by The American Ceramic Society. All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to
the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, [phone], fax
[phone], or on the web at www.copyright.com. Requests to the Publisher for permission should
be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ
07030, [phone], fax [phone], or online at http://www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in
preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of
merchantability or fitness for a particular purpose. No warranty may be created or extended by sales
representatives or written sales materials. The advice and strategies contained herein may not be
suitable for your situation. You should consult with a professional where appropriate. Neither the
publisher nor author shall be liable for any loss of profit or any other commercial damages, including
but not limited to special, incidental, consequential, or other damages.
For general information on our other products and services or for technical support, please contact our
Customer Care Department within the United States at [phone], outside the United States at
[phone] or fax [phone].
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit our web site at
www.wiley.com.
Library of Congress Cataloging-in-Publication Data is available.
ISBN: 978-1-119-04027-9
ISSN: 0196-6219
Printed in the United States of America.
10 9 8 7 6 5 4 3 2 1
Contents
Preface vii
Introduction ix
CERAMICS FOR ENERGY STORAGE AND CONVERSION
Towards the Conversion of a Solid Oxide Cell into a High 3
Temperature Battery
C. M. Berger, O. Tokariev, P. Orzessek, A. Hospach, N. H. Menzler, M.
Bram, W. J. Quadakkers, and H.-P. Buchkremer
Design and Fabrication of All-Solid-State Rechargeable Lithium 13
Batteries for Future Applications
Mao Shoji, Jungo Wakasugi, Ryo Osone, Teruaki Nishioka, Hirokazu
Munakata, and Kiyoshi Kanamura
Nanostructured LiCoO Cathode by Hydrothermal Process 23
2
Kuan-Zong Fung, Chung-Ta Ni, Su-Yi Tsai, Mei-Han Chen, A. F. Orliukas,
and Gunars Bajars
Thermoelectric Properties of Na Co Fe O Ceramic Prepared 35
0.8 1-x x 2
by Spark Plasma Sintering
Cong Chen, Tianshu Zhang, Richard Donelson, Dewei Chu, Thiam Teck Tan,
and Sean Li
Effects of Sintering Temperature on Thermoelectric Properties of 43
Nanocrystalline Ca Yb MnO Prepared by Co-Precipitation
0.9 0.1 3
Method
Rezaul Kabir, Ruoming Tian, Danyang Wang, Richard Donelson, Thiam Teck
Tan, and Sean Li
Effect of Film Thickness on the Photocatalytic Performance of TiO 51
2
Thin Films Deposited by Spin Coating
W.F. Chen, P. Koshy, B. Zhu, and C.C. Sorrell
v
Effect of Heat Treatment Temperature on Properties of 61
Nanocrystalline, Photoactive, Titania, Thin Films on Polymer and
Fused Quartz
Huynh Chau Pham, Pramod Koshy, Julian Michael Cox, and Charles
Christopher Sorrell
Development of Electro-Optical Single Crystals for Energy Saving 77
Kiyoshi Shimamura, Stelian Arjoca, and Encarnación G. Víllora, Daisuke
Inomata, Kazuo Aoki, Akiharu Funaki, Tsubasa Hatanaka, Takeshi Kizaki,
and Kunihiro Naoe
CERAMICS AND COMPOSITES FOR NUCLEAR ENERGY
Modeling Structural Loading of Used Nuclear Fuel under Conditions 95
of Normal Transportation
Kenneth Geelhood, Harold Adkins, Scott Sanborn, Brian Koeppel, and
Nicholas Klymyshyn
Flexural Strength of Composite Tubes for SMR Applications using 111
Pure Bending: Draft ASTM Test Method
Michael G. Jenkins, Janine E. Gallego, and Thomas Nguyen
Hoop Tensile Strength of Ceramic Matrix Composite Tubes for 119
LWRS Applications using Elastomeric Inserts: Draft ASTM Test
Method
Michael G. Jenkins and Jonathan A. Salem
Ceramic Matrix Composites in Ti-B-Cr and Ti-B-Nb Systems 127
Fabricated “In Situ” by Self-Propagating High-Temperature
Synthesis
Marta Ziemnicka-Sylwester
Comparison of Shear Strength of Ceramic Joints Determined by 139
Various Test Methods With Small Specimens
Chunghao Shih, Yutai Katoh, Jim O. Kiggans, Takaaki Koyanagi,
Hesham E. Khalifa, Christina A. Back, Tatsuya Hinoki, and Monica Ferraris
Processing and Characterization of Diffusion-Bonded Silicon 151
Carbide Joints using Molybdenum and Titanium Interlayers
Takaaki Koyanagi, James Kiggans, Chunghao Shih, and Yutai Katoh
Author Index 161
vi · Ceramic Materials for Energy Applications IV
Preface
This proceedings issue contains contributions from two energy related symposia
that were part of the 38th International Conference on Advanced Ceramics and
Composites (ICACC), in Daytona Beach, Florida, January 26-31, 2014. The sym-
posia include Advanced Materials and Technologies for Energy Generation and
Rechargeable Energy Storage and Advanced Ceramics and Composites for Sustain-
able Nuclear Energy and Fusion Energy. These symposia were sponsored by the
ACerS Engineering Ceramics Division and ACerS Nuclear & Environmental Tech-
nology Division, respectively.
The editors wish to thank the authors and presenters for their contributions, the
symposium organizers for their time and labor, and all the manuscript reviewers for
their valuable comments and suggestions. Acknowledgment is also due for finan-
cial support from the Engineering Ceramics Division, the Nuclear & Environmental
Technology Division, and The American Ceramic Society. The editors wish to
thank Greg Geiger at ACerS for all his effort in assembling and publishing the pro-
ceedings.
HUA-TAYLIN,Guangdong University of Technology, China
YUTAIKATOH, Oak Ridge National Laboratory, USA
JOSEFMATYÁŠ,Pacific Northwest National Laboratory, USA
vii