Automotive Software: PT-127

610 Pages·2006·93.283 MB·English

by  Jurgen, Ronald K

AUTOMOTIVE SOFTWARE
PT-127
Edited by
Ronald K. Jurgen
Published by
SAE International
400 Commonwealth Drive
Warrendale, PA 15096-0001
U.S.A.
Phone [phone]
Fax [phone]
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of SAE.
For permission and licensing requests contact:
SAE Permissions
400 Commonwealth Drive
Warrendale, PA 15096-0001-USA
Email: [email protected]
Fax: [phone]
Tel: [phone]
Global Mobility Database"
All SAE papers, standards, and selected
books are abstracted and indexed in the
Global Mobility Database.
For multiple print copies contact:
SAE Customer Service
Tel: [phone] (inside USA and Canada)
Tel: [phone] (outside USA)
Fax: [phone]
Email: [email protected]
ISBN 0-7680-1714-9
Library of Congress Catalog Number: 2005937533
SAE/PT-127
Copyright © 2006 SAE International
Positions and opinions advanced in this publication are those of the author(s) and not necessarily those of SAE.
The author is solely responsible for the content of the paper. A process is available by which discussions will be
printed with the paper if it is published in SAE Transactions.
Printed in USA
TABLE OF CONTENTS
Introduction
Complexity Mandates Rapid Software Development V
Ronald K. Jurgen, Editor
Overviews
Upfront Analysis in the Product Development Process (2005-01-1563) 3
Suchit Jain, Tin Bui, Jason Frick, Alain Khella, John Mason,
Richard Naddaf and Stewart Prince
A Software Component Architecture for Improving Vehicle
Software Quality and Integration (2005-01-0327) 11
Brendan Jackman and Shepherd Sanyanga
Why Switch to an OSEK RTOS and How to Address the
Associated Challenges (2005-01-0312) 21
Thierry Rolina and Nigel Tracey
Constraint-Driven Simulation-Based Automatic Task
Allocation on ECU Networks (2004-01-0757) 27
Paolo Giusto and Gary Rushton
Solving the Technology Strategy Riddle - Using TRIZ
to Guide the Evolution of Automotive Software
and Electronics (2004-01-0719) 35
Alex Shoshiev and Victor Fey
A Backbone in Automotive Software Development Based
on XML and ASAM/MSR (2004-01-0295) 45
Bernhard Weichel and Martin Herrmann
Development of Modular Electrical, Electronic, and
Software System Architectures for Multiple Vehicle
Platforms (2003-01-0139) 53
Gary Rushton, Armen Zakarian and Tigran Grigoryan
A New Calibration System for ECU Development (2003-01-0131) 63
Andre Rolfsmeier, Jobst Richert and Robert Leinfellner
Extensible and Upgradeable Vehicle Electrical, Electronic,
and Software Architectures (2002-01-0878) 73
Peter Abowd and Gary Rushton
A Rapid Prototyping Methodology for the Decision Making
Algorithms in Automotive Electronic Systems (2002-01-0754) 77
Michèle Ornato, Rosanna Bray, Massimo Carignano,
Valter Quenda and Francesco Mariniello
Software in Embedded Control Systems
Entire Embedded Control System Simulation Using a Mixed-Signal
Mixed-Technology Simulator (2005-01-1430) 87
Ken G. Ruan
Effective Application of Software Safety Techniques for Automotive
Embedded Control Systems (2005-01-0785) 95
Barbara J. Czerny, Joseph G. D'Ambrosio,
Brian T. Murray and Padma Sundaram
Evolutionary Safety Testing of Embedded Control Software by
Automatically Generating Compact Test Data Sequences (2005-01-0750) 107
Hartmut Pohlheim, Mirko Conrad and Arne Griep
Supporting Model-Based Development with Unambiguous
Specifications, Formal Verification and Correct-By-Construction
Embedded Software (2004-01-1768) 119
Wolfram Hohmann
Managing the Challenges of Automotive Embedded Software
Development Using Model-Based Methods for Design
and Specification (2004-01-0720) 125
Mark Yeaton
A Development Method for Object-Oriented Automotive Control
Software Embedded with Automatially Generated Program
from Controller Models (2004-01-0709) 131
Kentaro Yoshimura, Taizo Miyazaki, Takanori Yokoyama,
Toru Irie and Shinya Fujimoto
Development of an Engineering Training System in Hybrid
Control System Design Using Unified Modeling
Language (UML) (2004-01-0707) 139
Hisahiro Miura, Masahiro Ohba, Masashi Tsuboya,
Atsuko Higashi and Masayuki Shoji
Building Blocks Approach for the Design of Automotive
Real-Time Embedded Software (2004-01-0360) 145
Thierry Rolina
Integrated Modeling and Analysis of Automotive Embedded
Control Systems with Real-Time Scheduling (2004-01-0279) 153
Zonghua Gu, Shige Wang, Jeong Chan Kim and Kang G. Shin
A Practical, C Programming Architecture for Developing
Graphics for In-Vehicle Displays (2004-01-0270) 161
Michael T. Juran
Robust Embedded Software Begins with High-Quality
Requirements (2002-01-0873) 169
Ronald P. Brombach, James M. Weinfurther,
Allen E. Fenderson and Daniel M. King
Virtual Prototypes and Computer Simulation Software
Optimization of Accessory Drive System of the V6
Engine Using Computer Simulation and Dynamic
Measurements (2005-01-2458) 185
Jaspai S. Sandhu, Antoni Szatkowski,
Brad A. Rose and Fong Lau
A Tool for the Simulation and Optimization of the Damping
Material Treatment of a Car Body (2005-01-2392) .191
M. Danti, D. Vigè and G. V. Nierop
How to Do Hardware-in-the-Loop Simulation Right (2005-01-1657)........... 201
Susanne Kôhl and Dirk Jegminat
Virtual Prototypes as Part of the Design Flow of Highly
Complex ECUs (2005-01-1342) 211
Joachim Krech, Aibrecht Mayer and Gerlinde Raab
Nonlinear FE Centric Approach for Vehicle Structural
Integrity Study (2004-01-1344) 219
Cong Wang and Narendra Kota
Virtual Aided Development Process According
to FM VSS201U (2004-01-0188) 233
Christoph Knotz and Bernd Mlekusch
A Semi-Analytical Method to Generate Load Cases for CAE
Durability using Virtual Vehicle Prototypes (2003-01-3667) 237
Joselito Menezes da Cruz, Ivan Lima do Espirito Santo
and Adilson Aparecido de Oîiveira
Tools for Integration of Analysis and Testing (2003-01-1606) 243
Shawn You, Christoph Leser and Eric Young
Simulation Based Reliability Assessment of
Repairable Systems (2003-01-1217) 251
Animësh Dey, Robert Tryon and Loren Nasser
ACE Driving Simulator and Its Applications to Evaluate
Driver Interfaces (2003-01-0124) ....257
Vivek Bhise, Edzko Smid and James Dowd
Development and Correlation of Internal Heat Test Simulation
Using CFD (2003-01-0647).... 267
Corey T. Halgren and Frances K. Hilburger
Virtual Reality Technology for the Automotive
Engineering Area (2002-01-3388) 271
Antonio Valerio Netto, Arnaldo Marin Penachio
and Anésio Tarcisio Anitelle
Enabling Rapid Design Exploration through Virtual
Integration and Simulation of Fault Tolerant
Automotive Application (2002-01-0563) 277
Thilo Demmeler, Barry O'Rourke and Paolo Giusto
Safety Critical Applications
Software Certification for a Time-Triggered Operating
System (2005-01-0784) 291
Peter S. Groessinger
Survey of Software Failsafe Techniques for Safety-Critical
Automotive Applications (2005-01-0779) 297
Eldon G. Leaphart, Barbara J. Czerny, Joseph G. D'Ambrosio,
Christopher L Denlinger and Deron Littlejohn
An Adaptable Software Safety Process for Automotive
Safety-Critical Systems (2004-01-1666) . 313
Barbara J. Czerny, Joseph G. D'Ambrosio, Paravila O. Jacob,
Brian T. Murray and Padma Sundaram
A Design Methodology for Safety-Relevant Automotive
Electronic Systems (2004-01-1665) 323
Stefan Benz, Elmar Diiger, Werner Dieterle and Klaus D. Muller-Glaser
Preserving System Safety Across the Boundary between System
Integrator and Software Contractor (2004-01-1663) 335
Jeffrey Howard
Development of Safety-Critical Software Using Automatic
Code Generation (2004-01-0708) 347
Michael Beine, Rainer Otterbach and Michael Jungmann
Software for Modeling
A Dynamic Model of Automotive Air Conditioning
Systems (2005-01-1884).... ....357
Zheng David Lou
Advances in Rapid Control Prototyping
- Results of a Pilot Project for Engine Control- (2005-01-1350) 365
Frank Schuette, Dirk Berneck, Martin Eckmann and Shigeaki Kakizaki
AutoMoDe ~ Notations, Methods, and Tools for Model-Based
Development of Automotive Software (2005-01-1281) 375
Andreas Bauer, Manfred Broy, Jan Romberg,
Bernhard Schâtz, Peter Braun, Ulrich Freund,
Nuria Mata, Robert Sander and Dirk Ziegenbein
Formal Verification for Model-Based Development (2005-01-0781) 383
Amar Bouali and Bernard Dion
Model Reduction for Automotive Engine to Enhance Thermal
Management of European Modern Cars (2005-01-0700) 395
C. Gamier, J. Bellettre, M. Tazerout,
R. Haller and G. Guyonvarch
Running Real-Time Engine Model Simulation with
Hardware-in-the-Loop for Diesel Engine Development (2005-01-0056) 405
P. J. Shayler, A. J. Allen and A. L. Roberts
Feasibility of Reusable Vehicle Modeling:
Application to Hybrid Vehcles (2004-01-1618) 413
A. Rousseau, P. Sharer and F. Besnier
Model-based Testing of Embedded Automotive Software
using MTest (2004-01-1593) 423
Klaus Lamberg, Michael Beine, Mario Eschmann,
Rainer Otterbach, Mirko Conrad and Ines Fey
integration of a Common Rail Diesel Engine Model into an
industrial Engine Software Development Process (2004-01-0900) 433
J. Baumann, D. D. Torkzadeh, U. Kiencke,
T. Schlegl and W. Oestretcher
A Model for Electronic Control Units Software Requirements
Specification (2004-01-0704) 441
Massimo Annunziata, Ferdinando De Cristofaro,
Carlo Di Guiseppe, Agostino Natale and Stefano Scala
Model-Based System Development ~ Is it the Solution
to Control the Expanding System Complexity
in the Vehicle? (2004-01-0300) 447
Roland Jeutter and Bernd Heppner
Modeling of Steady and Quasi-Steady Flows within a
Flat Disc Type Armature Fuel Injector (2003-01-3131) 455
M. H. Shojaeefard and M. Shariati
Three Dimensional Finite Element Analysis of Crankshaft
Torsional Vibrations using Parametric Modeling
Techniques (2003-01-2711) 465
Ravi Kumar Burla, P. Seshu, H. Hirani,
P. R. Sajanpawar and H. S. Suresh
Defect Identification with Model-Based Test
Automation (2003-01-1031).... 473
Mark Blackburn, Aaron Nauman,
Bob Busser and Bryan Stensvad
Model Based System Development in Automotive (2003-01-1017) 481
Martin Mutz, Michaela Huhn,
Ursula Goltz and Carsten Krornke
Implementation-Conscious Rapid Control Prototying Platform
for Advanced Model-Based Engine Control (2003-01-0355) 491
Minsuk Shin, Wootaik Lee and Myoungho Sunwoo
Software for Testing
integrated Test Platforms: Taking Advantage of Advances in
Computer Hardware and Software (2005-01-1044) 499
Mark D. Robison
Next Generation Instrumentation and Testing Software
Built from the .NET Framework (2005-01-1041) 503
Steven E. Kuznicki
The Bus Crusher and the Armageddon Device -
Part I (2004-01-1762) 509
Ronald P. Brombach
A New Environment for Integrated Development and
Management of ECU Tests (2003-01-1024) 521
Klaus Lamberg, Jobst Richert and Rainer Rasche
Software Source Codes
Verifying Code Automatically Generated from an
Executable Model (2005-01-1665) ....533
Cheryl A. Williams, Michael A. Kropinski,
Onassis Matthews and Michael A. Steele
Automatic Code Generation and Platform Based Design
Methodology: An Engine Management System Design
Case Study (2005-01-1360) 539
Alberto Ferrari, Giovanni Gaviani, Giacomo Gentile,
Monti Stefano, Luigi Romagnoli and Michael Beine
A Source Code Generator Approach to implementing
Diagnostics in Vehicle Control Units (2004-01-0677) 547
Christoph Râtz
Auto-Generated Production Code Development for Ford/Think
Fuel Cell Vehicle Programme (2003-01-0863) 553
C. E. Wartnaby, S. M. Bennett, M. Ellims, R. R R. aju,
M. S. Mohammed, B. Patel and S. C. Jones
Miscellaneous Software Applications
Noise Cancellation Technique for Automotive Intake Noise
Using a Manifold Bridging Technique (2005-01-2368) 567
Colin Novak, Helen Ule and Robert Gaspar
A Benchmark Test for Springback: Experimental Procedures
and Results of a Slit-Ring Test (2005-01-0083)... 575
Z. Cedric Xia, Craig E. Miller, Maurice Lou, Ming F. Shi,
A. Konieczny, X. M. Chen and Thomas Gnaeupel-Herold
Intelligent Fault Diagnosis System of Automotive
Power Assembly Based on Sound Intensity
Identification (2004-01-1656) 583
Chen Xiaohua, Wei Shaohua, Zhang Bingjun and Zhu Xuehua
Highly Responsive Mechatronic Differential for
Maximizing Safety and Drive Benefits of Adaptive Control
Strategies (2004-01 -0859) 587
Stuart Hamilton amd Mircea Gradu
Optimization and Robust Design of Heat Sinks for Automotive
Electronics Applications (2004-01-0685) 601
Fatma Kocer, Sid Medina, Balaji Bharadwaj,
Rodolfo Palma and Roger Keranen
Automotive Body Structure Enhancement for Buzz, Squeak
and Rattle (2004-01-0388) 607
Raj Sohmshetty, Ramana Kappagantu,
Basavapatna P. Naganarayana and S. Shankar
Software Tools for Programming High-Quality
Haptic Interfaces (2004-01-0383) 615
Christophe Ramstein, Henry da Costa and Danny Grant
Software Development Process and Software-Components
for X-by-Wire Systems (2003-01-1288) 623
Andreas Kriiger, Dietmar Kant and Markus Buhlmann
The Software for a New Electric Clutch Actuator
Concept (2003-01-1197) 631
Reinhard Ludes and Thomas Pfund
Future Software Trends
Software's Ever Increasing Role 639
Ronald K. Jurgen, Editor
OVERVIEWS