Atas Brochure

28 Pages·2012·6.26 MB·English

ATAS International, Inc.
Energy Efficient Building Envelope Technology
Metal Roofing Systems
Featuring
Batten Seam, Standing Seam,
Shingles & Tile
Metal Wall Panels
Featuring
Facades, Mansards,
Curved Panels
Sustainable
Featuring
BIPV, Cool Roofing &
Transpired Solar Collector
Accessories
Featuring
Ceilings, Light Gauge Framing,
Rainware & Soffits
www.atas.com
email: [email protected]
6612 Snowdrift Rd.
Allentown, PA 18106
800.468.1441 toll-free
610.395.8445 phone
610.395.9342 fax
Mesa, AZ
480.558.7210 phone
480.558.7217 fax
Maryville, TN
800.468.1441
Big enough to cover the world,
small enough to serve your needs
The headquarters of ATAS International, Inc. is located in Allentown, consistent with continued growth, enhanced customer and
PA. In this modern manufacturing facility, ATAS produces quality employee satisfaction, and harnessing growth responsibility.
metal roofing, wall, energy-efficient building envelope technology
and ceiling systems. Accessories include soffit and facade panels, ATAS also functions sustainably to keep costs down for customers,
valleys, ridge caps, gable and eave trim and rainware. ATAS’ to promote energy efficiency and because it is the right thing
production team consistently manufactures precise products, meeting to do. Upgrades to equipment and lighting, stringent recycling
customer specifications and designs. other manufacturing facilities in programs, reusing skids and other materials, and reducing the use
mesa, AZ, and maryville, TN, enable ATAS to serve customers worldwide. of non-biodegradable objects are a few steps we have taken to
embrace a sustainable lifestyle.
ATAS has experienced drafting and technical personnel to assist
you with the design, development and implementation of your Seminars
project. Prompt order processing with the Rapid Response system • Knowledge is Key to Success
saves both time and expense for our valued customers. we are • Understanding Metal Roofing
able to provide our customers with the industry-leading service • Transpired Solar Collectors
that has been synonymous with ATAS for years. • Energy Efficient Building Envelope Technology
• Test methods related to metal roofing- the test and the reality!
To offer information on a 24-hour basis, ATAS has developed
several programs for your convenience. Product information is Training seminars are available for metal roofing installers
available at www.atas.com or by e-mailing [email protected]. A to expand their experience and knowledge with metal roof
specification program is also available at www.atas.com. Simply installation for residential and commercial applications. AIA/CES
answer a few questions about the project, and allow the program seminars for Architects are available throughout the country. For
to create customized three-part specs for you in seconds! more detailed information, visit www.atas.com or call 610.395.8445
our belief in quality craftsmanship and prompt service has allowed Cost Evaluation
us to expand. In growing, we hope to provide our current and In evaluating the cost of any roof system, the installation,
future customers with unequaled product quality, courtesy and maintenance and repair cost over the life of the roof must be
fast order processing. call us, and let us prove ourselves. considered. Independent studies have shown, in most cases, a
metal roof system is the most economical when all these factors
ATAS operations have been certified to the ISo 9001:2008 with are taken into account. This applies to both new construction and
design International Quality System Standard in all locations. This reroofing.
certification assists ATAS with maintaining industry leadership
utilizing a customer focus and quality improvements that are Visit www.atas.com for the latest product updates!
2 www.ATAS.com
MonarchTM Batten Seam
monarch is a “batten” style panel with an integral batten and seam. Dutch Seam is a continuous standing seam panel with an integral
The batten seam and lock are an integral part of the panel, and a seam. with the lock and seam an integral part of the panel, there are
vertical “leg” is formed as an extra water barrier. A clip is hooked no seam caps to install. This prevents “blow-off” or “creeping” of the
over the leg; this allows for the expansion of the system. The panels cap or seam. mechanical field seaming of the panel is not required.
interlock with each other. All clips and fasteners required to install Just snap the panel onto the previously installed panel, fasten the clip
the panel are concealed with the batten of the consecutive panel. and the panel is in place. The Dutch Seam is a structural panel and
Continuous panel lengths eliminate cross seams. Easy one-piece can be fastened directly to purlins or solid substrate. The minimum
installation lowers on-site labor cost, and there are no extra caps or slope requirement for a roof is 2:12. A flat roof can be converted
strips to install. Also, no special equipment is required to zip or seam to the correct slope with the simple addition of a lightweight truss
the panels together. system.
SKU: MRB120, MRB160 SKU: MRD110, MRD150, MRD194
Gauge: .032, .040, .050* Aluminum Gauge: .032, .040 Aluminum
24, 22*, ga. metallic coated Steel, 24, 22* ga. metallic coated Steel
24* ga. 55% Al-Zn alloy coated Steel with 24* ga. 55% Al-Zn alloy coated Steel with
acrylic coating acrylic coating
Panel width: 12”, 16” 16*, 20* oz. copper
(Stiffening ribs standard, specify without) .027 Zinc* (MRD110 Only)
Panel Length: cut to customer specifications with a Panel width: 11”, 15”, 19 1/4”
minimum of 4’-0”, maximum to transportation (Stiffening ribs standard, specify without)
limitations and/or product and project design Panel Length: cut to customer specifications with a
considerations minimum of 2’-0”, maximum to transportation
Batten Height: 2” limitations and/or product and project design
Texture: Embossed, Smooth considerations
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Seam Height: 1 1/2”
colors: choice of 30 standard colors Texture: Embossed, Smooth
Anodized: Clear, Dark Bronze Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Accessories: A complete line of trims available in matching colors: choice of 30 standard colors
colors, gauge and finish or as specified Anodized: Clear, Dark Bronze
minimum Slope: 2:12 Accessories: A complete line of trims available in matching
*Subject to minimum quantities and lead time colors, gauge and finish or as specified
Inquire for availability minimum Slope: 2:12
*Subject to minimum quantities and lead time
Inquire for availability
12”, 16”
11”, 15”, 19 ¼”
2” Stiffening Ribs 1 ½” Stiffening Ribs
www.ATAS.com 3
TM
2 3/8” Field-Lok Panel 2” Field-Lok Panel
The Field-Lok, FLS Series, Standing Seam panel features a Triple-Lok The FLR series is a mechanical field seamed panel system. The double-
design that has been proven to outperform all roof systems in testing for
locked structural panel can meet severe load requirements. For
wind uplift resistance. The Field-Lok incorporates a “hooked in” standing
aesthetic reasons or personal preference, the panel can be seamed
seam with a double folded design to resist seam failure between
supports, inhibit sidelap unfurling or unzipping, and add structural with a single fold displaying a broader seam. The single fold meets
integrity to the roof system. Installed with “floating” clips, Field-Lok the needs for a structural panel while providing the reliability of a
accommodates for expansion and contraction of the roof system. weathertight roof. The panel system is installed with a sliding clip.
The adjacent panel conceals the fasteners and clips. A power-driven
mechanical seamer is used to interlock the panels at the site. Field-Lok
has the flat pan/vertical rib profile preferred by architects for superior
performance with traditional appearance. Because of its strength, SKU: FLR154, FLR195, FLR999
watertightness and aesthetics, Field-Lok meets the new stringent Gauge: .032 Aluminum,
building codes and specifications and is suitable for a wide range of 24, 22* ga. metallic coated Steel,
climatic conditions. The extra-high locked standing seam adds structural
24* ga. 55% Al-Zn alloy coated Steel with
integrity to the roof system.
acrylic coating
Panel Width: 15 ¼”, 19 1/2”, Custom
SKU: FLS137, FLS180
(Plank ribs standard, specify without)
Gauge: .032, .040 Aluminum,
Panel Length: cut to customer specifications with a
24, 22* ga. metallic coated Steel,
24* ga. 55% Al-Zn alloy coated Steel with acrylic minimum of 4’-0”, maximum to transportation
coating limitations and/or product and project design
Panel width: 13 ¾”, 18” considerations
(Stiffening ribs standard, specify without) Seam Height: 2”
Panel Length: cut to customer specifications with a minimum of Texture: Smooth
4’-0”, maximum to transportation limitations and/ Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
or product and project design considerations colors: choice of 30 standard colors
Seam Height: 2 3/8”
Anodized: clear
Texture: Smooth
Accessories: A complete line of trims available in matching
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
colors, gauge and finish or as specified
colors: choice of 30 standard colors
Minimum Slope: 1/2:12
Accessories: A complete line of trims available in matching
optional sealant is available
colors, gauge and finish or as specified
Minimum Slope: 1/2:12 *Subject to minimum quantities and lead time
optional sealant is available Inquire for availability
*Subject to minimum quantities and lead time
Inquire for availability
13 ¾”, 18"
Optional
Seam Sealant
2 3⁄8” Stiffing Ribs
13 ¾”, 18" 15 ¼", 19 ½"
Optional
Seam Sealant
2 3⁄8” Optional Striations (Specify) 2" Optional Plank Ribs
Seam Sealant
4 www.ATAS.com
TM
1 ½” Field-Lok Panel 1” Field-Lok Panel
Installed with a sliding clip, the 1 1/2” Field-Lok panel is a non-structural 1” Field-Lok Panel with 1” high seam FLL is a non-structural double-
double-locked roof panel. The FLm series is mechanically seamed in locked roof panel. FLL has passed industry performance tests in
the field and provides the traditional appearance of standing seam. accordance with UL 580 class 90. It can be curved (FLX) for special
Plank ribs are standard. The FLm series may also be curved, but plank accents, as well as over entrances and walkways. The panel system is
ribs are not available when the panels are curved. contact ATAS for installed with either a sliding or fixed clip.
radius limitations.
SKU: FLL135, FLL175, FLL217, FLL999
SKU: FLM125, FLM165, FLM207, FLM999 Gauge: .032 Aluminum,
Gauge: .032 Aluminum, 24 ga metallic coated Steel
24 ga. metallic coated Steel, 24* ga. 55% Al-Zn alloy coated Steel with
24* ga. 55% Al-Zn alloy coated Steel acrylic coating
with acrylic coating Panel Width: 13 1/2”, 17 1/2”, 21 3/4” , Custom
Panel Width: 12 1/2”, 16 1/2”, 20 3/4” , Custom (Plank ribs standard, specify without)
(Plank ribs standard, specify without) Panel Length: cut to customer specifications with a
Panel Length: cut to customer specifications with a minimum of 4’-0”, maximum to transportation
minimum 4’-0”, maximum to transportation limitations and/or product and project design
limitations and/or product and project design considerations
considerations Seam Height: 1”
Seam Height: 1 1/2” Texture: Smooth
Texture: Smooth Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF colors: choice of 30 standard colors
colors: choice of 30 standard colors Accessories: A complete line of trims available in matching
Accessories: A complete line of trims available in matching colors, gauge and finish or as specified
colors, gauge and finish or as specified minimum Slope: 2:12 depending on climate conditions
minimum Slope: 2:12 depending on climate conditions optional sealant is available
optional sealant is available *Subject to minimum quantities and lead time
*Subject to minimum quantities and lead time Inquire for availability
Inquire for availability
Both 1 1/2” and 1” Field-Lok Panels can be curved. Contact ATAS for radius
limitations. For aesthetic reasons or personal preference, the panel can
be seamed with a single fold displaying a broader seam. Plank Ribs not
available when curved, see Curved Standing Seam in this catalog for more
information.
12 ½”, 16 ½”, 20 ¾”
13 ½”, 17 ½”, 21 ¾”
1 ½” Plank Ribs 1” Plank Ribs
www.ATAS.com 5
Curved Standing
Seam
curved Standing Seam is a convex panel with concealed clip and The Eco-Seam panel is an economical, one-piece, positive-locking,
fastener system. mechanically field locked seam gives increased standing seam panel. There are no extra caps, strips or clips needed.
weathertightness. This system is available in 1 1/2” and 1” seam heights. Installation is accomplished by hooking the panel into the previous
contact ATAS for radius limitations. panel and fastening with mechanical fasteners through pre-punched
holes to allow for expansion and contraction. The fasteners are
SKU: FLX covered by the adjacent panel. The positive locking action makes it
Gauge: .032 Aluminum, virtually impossible for the panels to slide apart.
24, 22* ga. metallic coated Steel,
24* ga. 55% Al-Zn alloy coated Steel with SKU: ECO120, ECO160
acrylic coating Gauge: .032 Aluminum,
Panel Width: 1” high: 13 1/2”, 17 1/2”, 21 3/4” 24 ga. metallic coated Steel
1 1/2” high: 12 1/2”, 16 1/2”, 20 3/4” Panel width: 12”, 16”
Panel Length: cut to customer specifications with a Panel Length: cut to customer specifications with a
minimum of 2’-0”, maximum to transportation minimum of 2’-0”, maximum of 20’-0” for
limitations and/or product and project design aluminum and 25’-0” for steel
considerations Seam Height: 1 ¼”
Seam Height: 1” or 1 1/2” Texture: Embossed, Smooth
curve: convex Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
minimum Radius: 28’-0” (Steel) colors: choice of 30 standard colors
16’-0” (Aluminum) Accessories: A complete line of trims available in matching
Texture: Smooth colors, gauge and finish or as specified
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF minimum Slope: 3:12
colors: choice of 30 standard colors Inquire for availability
Accessories: A complete line of trims available in matching
colors, gauge and finish or as specified
minimum Slope: 2:12 depending on climate conditions
optional Sealant is available for all panels
*Subject to minimum quantities and lead time
Inquire for availability
½”
1” @ 13 ½”, 17 ½”, 21 ¾” widths
1 ½” @ 12 ½”, 16 ½”, 20 ¾” widths
1 ¼”
1”, 1 ½” Fastener
12" Slots
6 www.ATAS.com
PC™ SNAP-ON SYSTEM
The Pc systems consist of two parts, the flat panel and a separate CURVED PC™ SYSTEM
seam or batten. The seam is snapped over the clips concealing the
fastening system. with the batten style, the system is installed with a
Curved PC System (PCX, PCV) is a standing seam panel consisting of
spacer clip and is snapped in place. The Pc systems are not structural
a snap-on-seam with concealed clip and fastener system. The panel
panels and must be applied to a solid substrate. Pc panels can be
comes in 11 ¼”, 12 5/8”, 14 5/8” (copper only) and 15 ¼” standard widths.
used for tapered and curved installations.
custom widths are available. The panel system can be curved in
concave or convex styles.
PC Pan SKU: PCP110, PCP120, PCP150, PCP999
PC Seam SKU: PCS114
Curved PC SKU: PCX, PCV
PC Batten SKU: PCB001, PCB002
Gauge: .032 or .040 Aluminum,
PC Copper SKU: PCP147
24 ga. metallic coated Steel
Gauge: .032 and .040 Aluminum,
16 oz. copper
24 ga. metallic coated Steel,
Panel Width: 11 ¼”, 12 5/8”, 14 5/8” *, 15 ¼”
16 oz. copper (PcP147 only)
*Copper and Dark Bronze Anodized Only
Panel Width: 11 ¼”, 12 5/8”, 14 5/8”*, 15 ¼” , Custom
Panel Length: cut to customer specifications with a minimum
*Copper and Dark Bronze Anodized Only
of 3’-0”, maximum to transportation limits and/
Panel Length: cut to customer specifications with a
or product and project design considerations
minimum of 2’-0”, maximum to transportation
Seam Height: 1” (Batten not available)
limits and/or product and project design
curve: convex or concave
considerations
minimum Radius: 2’-9” (PcX)
Seam Height: Standing Seam 1”,
4’-0” (PCV)
Batten Seam 1” x 1 1/2”
Texture: Embossed, Smooth
And 2” x 1 1/2”
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Available: Straight, Tapered, convex or concave
colors: choice of 30 standard colors
Texture: Embossed, Smooth
Anodized: Clear, Dark Bronze
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Accessories: A complete line of trims available in matching
colors: choice of 30 standard colors
colors, gauge and finish or as specified
Anodized: Clear, Dark Bronze
minimum Slope: 3:12
Accessories: A complete line of trims available in matching
Inquire for availability
colors, gauge and finish or as specified
minimum Slope: 3:12
Inquire for availability
2
0
0
B
C
1 P 2”
CB00 Ba1tt” en Batten 114 Standing cstuarnvdeidn 1g” sheiagmh
P PCS seam concave &
1”
convex
1 ¼” 1 ¼”
Batten Seam Styles Standing Seam Styles
www.ATAS.com 7
TM
® and
TM
Advanta, a simulated dimensional shingle, is easily installed from eave Permashake panels simulate the look of wood grained shingles
to ridge with concealed fasteners. The shingle has prepunched direct without the maintenance problems associated with such a roof.
fastening points with a four-way interlock for weathertightness. It is metal shake panels have the advantage of fire resistance and will
lightweight, allowing for installation over an existing roof without the not crack, split, warp or rot. Panels are installed from eave to ridge
need for tear-off and disposal*. Typical applications for Advanta are with concealed fasteners. Panels should be staggered for a natural
roofs on either commercial or residential buildings. It also is suitable appearance. The interlocking modules are fastened with an anchor
for walls and mansards. clip and lock system. Typical applications for Permashake are
decorative accents for mansards with a recommended minimum
*Subject to local codes slope of 12:12 or greater. Typical applications for Permashake II are
commercial or residential buildings with a minimum slope of 4:12.
SKU: HAS300
Gauge: 29 ga. metallic coated Steel SKU: HPS106 (Permashake), HPS300 (Permashake II)
16* oz. copper Gauge: .032 Aluminum (HPS106 only)
Panel Size: 12” by 36” exposed 29 ga. Metallic Coated Steel (HPS300 only)
Texture: Embossed Panel Size: 60” by 10” (Permashake)
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF 36” by 12” (Permashake II)
colors: 10 standard colors: mission Red, Forest Green, Texture: wood Grain
Char Brown, Sierra Tan, Slate Grey, Rocky Grey, Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Redwood, Bone White, Coppertone, Brite Red Colors: HPS106: 30 standard colors
6 designer colors ADVANTA®AMERICANA HPS300: 6 standard colors: Forest Green,
SERIES: Carolina Pine Green, Cape Cod Redwood, Sierra Tan, Slate Grey, Smokey
Grey, Grand Canyon Red, Kodiak Island Brown, mountain Grey and carolina Pine Green
Mojave Desert Tan and Smokey Mountain Grey Accessories: A complete line of trims available in matching
Accessories: A complete line of trims available in matching colors, gauge and finish or as specified
colors, gauge and finish or as specified Fasteners: concealed fasteners and clips
Fasteners: concealed fasteners Minimum Slope: HPS106: 12:12 or greater for decorative accents
minimum Slope: 3:12 HPS300: 4:12
*Subject to minimum quantities and lead time Inquire for Availability
Inquire for availability
60”
10”
1”
36”
Permashake (HPS106)
36"
1
1 2"
2"
1"
Permashake II (HPS300)
8 www.ATAS.com
®
Standing Seam Shingles are elegant in their style and feature a castleTop is a diamond-shaped flat metal shingle for a unique roof
four-way interlock to ensure weathertightness. These panels are appearance. The shingles offer easy install from eave to ridge with
installed with concealed fasteners from eave to ridge and over a concealed fasteners. An expanded polystyrene backer board gives
solid substrate. Transverse seams are staggered to provide a historic strength to allow for light foot traffic during installation. In some
standing seam appearance. The metal roof allows for snow and ice cases, the shingles may be applied directly over the existing roof,
to slide off easily, preventing damage from freeze and thaw cycles. eliminating the need for tear-off and disposal*. Different colors may
Typical applications for the Standing Seam Shingle are mansards, be combined to create interesting patterns. castleTop may be used
entryways, commercial and residential roofs with a minimum for commercial or residential roof applications with a recommended
recommended slope of 4:12. minimum slope of 3:12. The tile also is suitable for walls and
mansards.
SKU: HSS164 (36”), HSS165 (60”)
Gauge: .032 Aluminum, 16 oz. copper *Subject to local codes
Panel Size: 16” by 36” or 60”
Texture: Smooth SKU: HCT160
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Gauge: .032 Aluminum, .028 Zinc, 16 oz. copper
colors: choice of 30 standard colors Panel Size: 15 ¾” by 15 ¾”; actual exposure is
Accessories: A complete line of trims available in matching 13 1/2” by 13 1/2”
colors, gauge and finish or as specified Texture: Embossed (Aluminum only),
Fasteners: concealed fasteners and clips Smooth (copper and Zinc only)
minimum Slope: 4:12 Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Inquire for availability colors: choice of 30 standard colors (Aluminum only)
Anodized: Clear, Dark Bronze
Accessories: A complete line of trims available in matching
colors, gauge and finish or as specified
Fasteners: concealed fasteners
minimum Slope: 3:12
Inquire for availability
15
¾”
36” or 60” Lengths
16”
Nom.
www.ATAS.com 9
Rumba Shake
™
®
Rumba Shake, a Bermuda style roof panel, is easily installed from eave ScanRoof, a scalloped tile with a Northern European flair, is an
to ridge with concealed fasteners and clips. It is lightweight, allowing easy-to-install metal roof panel. The panels are structural, practical
for installation over an existing roof without the need for tear-off and economically efficient for any project. ScanRoof is the ideal
and disposal*. Typical applications for the Rumba Shake are roofs on roof system to stand up against mother Nature’s storms, typhoons,
either commercial or residential buildings with a minimum slope of hurricanes, damaging winds and driving rains. The panel is installed
4:12. It also is suitable for walls and mansards. horizontally, from eave to ridge, on a solid deck. ScanRoof has a 2”
high integral Z purlin allowing for air flow between the panel and
*Subject to local codes substrate. It is lightweight, allowing installation over an existing
roof without the need for tear-off and disposal*. Typical applications
SKU: HBS090 for ScanRoof are commercial and residential roofing with a
Gauge: .032, .040* Aluminum, recommended minimum slope of 3:12. It also is suitable for mansards.
24, 22* ga. metallic coated Steel,
16* oz. copper; *Subject to local codes
24*, 22* 55% Al-Zn alloy coated Steel with
acrylic coating SKU: SCP163
Panel Size: 9” by 11’-6” or 19’-6” Gauge: 24 ga. metallic coated Steel
Texture: Smooth Panel Width: 21” (16 1/2” exposed)
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Panel Length: 13’-10” (13’-2” exposed)
colors: choice of 30 standard colors Texture: Smooth
Anodized: Clear, Dark Bronze Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Accessories: A complete line of trims available in matching colors: 26 standard colors
colors, gauge and finish or as specified Premium finishes are not available
Fasteners: concealed fasteners and clips Accessories: A complete line of trims available in matching
minimum Slope: 4:12 colors, gauge and finish or as specified
optional sealant is available minimum Slope: 3:12
*Subject to minimum quantities and lead time Inquire for availability
Inquire for availability
13'-10" OVERALL
13'-2" COVERAGE
7 7⁄8”
L
L
A
9 ¾” R
E
9” 21" OV 16 ½” VERAGE
O
Optional Sealant C
1”
10 www.ATAS.com