Table Of ContentAsphalt Pavements contains the proceedings of the International Volume 1
Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June
2014), and discusses recent advances in theory and practice in asphalt
materials and pavements. The contributions cover a wide range of topics:
Asphalt Pavements
- Environmental protection and socio-economic impacts
- Additives and modifiers for asphalt concrete
- Maintenance and rehabilitation
Asphalt
- Experimental characterization of asphaltic materials
- Life cycle cost analysis/modeling of compaction in the laboratory and in
the field Pavements
- Perpetual pavements
- Pavement management systems
- Sustainable asphalt technologies
1
- Nondestructive testing of asphalt pavement
- Pavement condition survey/pavement smoothness/quality control/quality
assurance
- Microstructural characterization and micromechanics of asphaltic
materials
- Long-term pavement performance prediction
- Mineral aggregate in asphalt concrete/mix design methodology/novel
methods to aid mix design
- Warm mix asphalt technologies
- Innovative pavement analysis and design
- Pavement response analysis under static and moving wheel loads
- Recycling
- Modeling of asphaltic materials and pavements
- Microstructural characterization and micromechanics of asphalt
materials
- Asphalt pavement and environment
- Performance-related specifications
Asphalt Pavements will be of interest to academics and professional
involved in asphalt engineering. Editor
Kim
Editor: Richard Y. Kim
an informa business
ASPHALT PAVEMENTS
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb ii 77//11//22001144 55::3377::4499 PPMM
TThhiiss ppaaggee iinntteennttiioonnaallllyy lleefftt bbllaannkk
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ASPHALT PAVEMENTS
RALEIGH, NORTH CAROLINA, USA, 1–5 JUNE 2014
Asphalt Pavements
Editor
Y. Richard Kim
Distinguished University Professor
Department of Civil, Construction, and Environmental Engineering
North Carolina State University, Raleigh, NC, USA
VOLUME 1
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb iiiiii 77//11//22001144 55::3377::5500 PPMM
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2014 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in the USA by Edwards Brothers Malloy, Lillington, NC
All rights reserved. No part of this publication or the information contained herein may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, elec-
tronic, mechanical, by photocopying, recording or otherwise, without written prior permis-
sion from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the
information herein, no responsibility is assumed by the publishers nor the author for any
damage to the property or persons as a result of operation or use of this publication and/or
the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-02693-3 (Set of two volumes Hbk)
ISBN: 978-1-138-02712-1 (Vol 1)
ISBN: 978-1-138-02713-8 (Vol 2)
ISBN: 978-1-315-73675-4 (eBook PDF)
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb iivv 77//11//22001144 55::3377::5500 PPMM
Asphalt Pavements – Kim (Ed)
© 2014 Taylor & Francis Group, London, ISBN 978-1-138-02693-3
Table of contents
Welcoming remarks xix
ISAP 2014 committees xxi
Sponsors xxiii
VOLUME 1
Plenary papers
Plenary session on design
M-E flexible pavement design: Issues and challenges 3
M.R. Thompson
Plenary session on materials
Insights into binder chemistry, microstructure, properties relationships—usage
in the real world 13
J.-P. Planche
Plenary session on preservation
Why preservation-definitions, treatment types, benefits, and challenges 23
R.G. Hicks & D. Cheng
Podium papers
Environmental protection and socio-economic impacts
Urban heat island effect: Comparing thermal and radiation effects of asphalt
and concrete pavements on adjacent buildings using CFD methods 33
M. Swanson & A. Hobbs
Worker exposure to ultrafine particles in asphalt laboratory 41
S. Asadi & M.M. Hassan
Method for calculating warm mix energy saving based on stack
gas measurements 49
B. Frank & B. Prowell
Additives and modifiers for asphalt concrete—I
Surface energy measurements and wettability investigation of different minerals
and bitumen for cold asphalts 61
A. Khan, P. Redelius & N. Kringos
v
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb vv 77//11//22001144 55::3377::5500 PPMM
Damage in asphalt concrete during the dynamic complex modulus
and flow number tests 71
M.A. Elseifi, L.N. Mohammad, E. Kassem, H. Ying & E. Masad
The Universal Simple Aging Test (USAT): Simulating short- and long term hot
and warm mix oxidative aging in the laboratory 79
M.J. Farrar, J.-P. Planche, R.W. Grimes & Q. Qin
Maintenance and rehabilitation—I
Performance study of fog or rejuvenating seals on gap and open graded surfaces
for Caltrans 91
D. Cheng, L. Lane & P. Vacura
Evaluation of early aggregate retention performance of chip seals with
Polymer-Modified Emulsions 105
J.H. Im & Y.R. Kim
Pavement and Materials Technology Review for municipalities—including
a case study 115
L. Uzarowski & V. Henderson
Experimental characterization of asphaltic materials—I
Field applications of portable infrared spectroscopy to asphalt products 127
I. Yut, A. Bernier & A. Zofka
Experimental investigation of frost/thaw effects on bituminous mixes under
wet conditions 139
C. Mauduit, É. Crégut, S. Joly, S. Liandrat, O. Chupin, F. Hammoum & J.-M. Piau
Determination of discrete retardation spectra of asphalt binders using Modified
Windowing Method 147
Y. Sun, J. Chen, J. Liu & H. Xu
Life cycle cost analysis/modeling of compaction in the
laboratory and in the field
DAsphalt—Innovative asphalt mix for PPP projects
with increased lifetime 157
S. Pahirangan & N. Simmleit
Superpave Gyratory Compactor as a compaction predictor tool for unbound material 167
C. Kumpel, A. Bagriacik, R. Cohen, S. Rossi, C. Yurick, W.H. Ma,
A. Daouadji & M.B. Sukumaran
Including asphalt cooling and rolling regimes in laboratory compaction procedures 177
F.R. Bijleveld & A.G. Dorée
Perpetual pavements
Oxidative aging of long-life asphalt pavements in Hong Kong 191
Y. Wang, Y. Wen, K. Zhao, J. Wei, H. Wang & A.S.T. Wong
Mechanistic responses in perpetual pavement 201
D. Gedafa, M. Hossain & S. Romanoschi
Long life surfaces for busy roads 211
R. Elliott, C. Fergusson, J. Richardson, A. Stevenson & D. James
vi
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb vvii 77//11//22001144 55::3377::5500 PPMM
Optimising long life low noise porous asphalt 221
D. Alabaster, P. Herrington & J. Waters
Pavement management systems
A performance-based Pavement Management System for the road network
of Montreal city—a conceptual framework 233
Md. S.R. Amin & L.E. Amador-Jiménez
Noise related to pavement preservation surfaces in NJ 245
J. Hencken, Ed. Haas, M. Tulanowski & T. Bennert
Significance of non-load related distresses on airfield asphalt pavements:
Review of 25 years of pavement management data 253
J.F. Rushing, J.D. Doyle & A. Harrison
Analysis of rolling resistance models to analyse vehicle fuel consumption
as a function of pavement properties 263
J. Bryce, J. Santos, G. Flintsch, S. Katicha, K. McGhee & A. Ferreira
Additives and modifiers for asphalt concrete—II
Physicochemical characteristics of RAP binder blends 277
S.-C. Huang, A.T. Pauli & Q. Qin
Evaluation of test sections with Polymer Modified Bitumens 287
X. Lu, S. Said, H. Carlsson, H. Soenen, S. Heyrman & P. Redelius
The low temperature characterization of bio-modified shingles 297
D. Oldham, E.H. Fini & A. Onochie
Optical fiber sensors with flexible encapsulation for pavement behavior monitoring 309
W. Liu, X. Xing, Y. Zhao, Z. Wang & L. Kang
Sustainable asphalt technologies—I
New surface layers with low rolling resistance tested in Denmark 323
M. Pettinari, B. Schmidt, B. Bo Jensen & O. Hededal
Design alternative comparison system for pavements 333
D. Andrei
Development of water-based curing reactive cold asphalt repair material 343
H. Moriyasu, H. Taniguchi, K. Koshi & K. Hatakeyama
Effect of moisture on asphalt mastic tensile properties at ambient temperature 355
A.K. Apeagyei, J.R.A. Grenfell & G. Airey
Experimental characterization of asphaltic materials—II
Triaxial Cyclic Compression Testing of hot mix asphalt with cyclic confining pressure 367
B. Hofko, M. Hospodka & R. Blab
Impact of field ageing on low-temperature performance of binder
and hot mix asphalt 381
B. Hofko, M. Hospodka, R. Blab, L. Eberhardsteiner, J. Füssl,
H. Grothe & F. Handle
Advanced Shear Tester for solid and layered samples 397
A. Zofka, A. Bernier, R. Josen & M. Maliszewski
vii
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb vviiii 77//11//22001144 55::3377::5500 PPMM
Effect of cooling rate on the thermo-volumetric, thermo-viscoelastic, and fracture
properties of asphalt mixtures 405
M.Z. Alavi & E.Y. Hajj
Nondestructive testing of asphalt pavement
Study of the cavity problem under the pavement caused by the earthquake in 2011 419
F. Kawana, K. Kubo, N. Ueda, Y. Takeuchi & K. Matsui
Performance of Permeable Friction Course (PFC) pavements over time 427
E. Arambula, C.K. Estakhri, A.E. Martin, M. Trevino, A. Smit & J. Prozzi
Implementation of algorithms for asphalt moduli temperature correction 439
C. Plati, V. Papavasiliou, A. Loizos & C. Tsaimou
Use of distributed fiber optic sensors to detect damage in a pavement 449
X. Chapeleau, J. Blanc, P. Hornych, J.-L. Gautier & J. Carroget
Pavement condition survey/pavement smoothness/quality control/quality assurance
Evaluation of fatigue damage in asphalt pavement using
FWD dissipated work 461
K. Maruyama & M. Kumagai
Estimation of a longitudinal true profile for expressway pavements by a mobile
profiling system 471
K. Tomiyama, A. Kawamura, T. Ohiro & S. Tozuka
A study on profile improvement in pavement repair 481
K. Kamiya, K. Yamaguchi, A. Kawamura & K. Tomiyama
Assess asphalt in-place density with Intelligent Compaction measurements 489
G.K. Chang, V.L. Gallivan & Q. Xu
Microstructural characterization and micromechanics of asphaltic materials—I
Automatic generation of micromechanical numerical simulation model of asphalt
concrete with visco-elastic properties 515
X. Li, L. Li, Y. Huo, X. Wang & C. Shi
Understanding the microstructure of bitumen: A CLSM and fluorescence approach
to model bitumen ageing behavior 521
F. Handle, J. Füssl, S. Neudl, D. Grossegger, L. Eberhardsteiner, B. Hofko,
M. Hospodka, R. Blab & H. Grothe
A constitutive model for simulation of water to ice phase change
in asphalt mixtures 531
A. Varveri, S. Avgerinopoulos, C. Kasbergen, A. (Tom) Scarpas & A. Collop
Comparing image processing techniques for asphalt concrete X-ray CT images 541
T. Papagiannakis, H. Zelelew & S. Agaian
Long-term pavement performance prediction—I
Effect of saturated ageing on fatigue behavior of asphalt pavements 553
A. Bommerla & K.S. Reddy
Military pavement subgrade problems 561
R. Rollings, N. Rollings & M. Rollings
viii
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb vviiiiii 77//11//22001144 55::3377::5511 PPMM
Influence of moisture on Resilient Deformation behaviour of Unbound
Granular Materials 571
M.S. Rahman & S. Erlingsson
Determination of the preferred intervention point for rehabilitation
of dense graded asphalt wearing courses on the sand sub-grades
of the Swan Coastal Plain in consideration of the triple bottom line
(ecological, economic and social impacts) 581
M. Glover
Experimental characterization of asphaltic materials—III
Discrete Element Modelling and experimental study on dilation behaviour
of asphalt mixtures 595
J. Zhang, J. Yang & K. Wang
Fatigue characters of asphalt multilayer surfacing system on steel bridge deck
based on the five-point bending tests 607
X. Liu, G. Tzimiris, T. Scarpas & J. Li
Determination of binder-aggregate adhesion by contact angle measurement 617
R. Aranowski, P. Wojewódka & K. Błażejowski
Investigation of asphalt mixture strength statistics at low temperature based
on size effect analysis 625
A.C. Falchetto, J.-L. Le & M. Marasteanu
Mineral aggregate in asphalt concrete/mix design methodology/novel methods
to aid mix design
Effect of fine aggregate form, angularity and texture on the viscoelastic
properties of asphalt mortar 637
Y. Tan, H. Zhang, H. Xu, Y. Wang & X. Yao
Research on fractal features of basalt aggregate surface topography 649
J. Pei, Y. Li, D. Zhang, Y. Liu & J. Zhang
Design of cement stabilized full depth reclaimed mixes using Superpave
Gyratory Compactor 661
I. Boz & M. Solaimanian
Hot Mix Asphalt for airfield pavements—moving from Marshall mix design
to Superpave 671
N. Garg, Q. Li, H. Brar & I. Song
Implementation of a static strength test for evaluating the rutting resistance
of asphalt mixtures and its application for quality controls 679
S. Angelone, M.C. Casaux & F. Martinez
Warm mix asphalt technologies—I
Moisture susceptibility of Warm-Mix Asphalt 691
L.G. Cucalon, A.E. Martin, E. Arambula, F. Yin, C.K. Estakhri, E.S. Park & J. Epps
Evaluation of Warm Mix Asphalt technology for surface mixtures 701
D. Ayyala, H. Malladi, N.P. Khosla & A.A. Tayebali
Study on the improved recycled asphalt mixtures by microbubble-foamed asphalt 709
K. Koshi, H. Moriyasu, K. Saito & Y. Shimizu
ix
IISSAAPP000000--11440044__VVooll--0011__BBooookk..iinnddbb iixx 77//11//22001144 55::3377::5511 PPMM
