Table Of ContentLecture Notes in Mechanical Engineering
Sergej Hloch
Dagmar Klichová
Grzegorz M. Krolczyk
Somnath Chattopadhyaya
Editors
Lucie Ruppenthalová
Advances in
Manufacturing
Engineering and Materials
Proceedings of the International
Conference on Manufacturing
Engineering and Materials
(ICMEM 2018), 18–22 June, 2018,
Nový Smokovec, Slovakia
Lecture Notes in Mechanical Engineering
LectureNotesinMechanicalEngineering(LNME) publishes the latest develop-
ments in Mechanical Engineering—quickly, informally and with high quality.
Originalresearchreportedin proceedings andpost-proceedings represents thecore
of LNME. Also considered for publication are monographs, contributed volumes
and lecture notes of exceptionally high quality and interest. Volumes published in
LNME embrace all aspects, subfields and new challenges of mechanical
engineering. Topics in the series include:
(cid:129) Engineering Design
(cid:129) Machinery and Machine Elements
(cid:129) Mechanical Structures and Stress Analysis
(cid:129) Automotive Engineering
(cid:129) Engine Technology
(cid:129) Aerospace Technology and Astronautics
(cid:129) Nanotechnology and Microengineering
(cid:129) Control, Robotics, Mechatronics
(cid:129) MEMS
(cid:129) Theoretical and Applied Mechanics
(cid:129) Dynamical Systems, Control
(cid:129) Fluid Mechanics
(cid:129) Engineering Thermodynamics, Heat and Mass Transfer
(cid:129) Manufacturing
(cid:129) Precision Engineering, Instrumentation, Measurement
(cid:129) Materials Engineering
(cid:129) Tribology and Surface Technology
More information about this series at http://www.springer.com/series/11236
á
Sergej Hloch Dagmar Klichov
(cid:129)
Grzegorz M. Krolczyk Somnath Chattopadhyaya
(cid:129)
á
Lucie Ruppenthalov
Editors
Advances in Manufacturing
Engineering and Materials
Proceedings of the International Conference
on Manufacturing Engineering and Materials
– ý
(ICMEM 2018), 18 22 June, 2018, Nov
Smokovec, Slovakia
123
Editors
SergejHloch SomnathChattopadhyaya
Faculty of Manufacturing Technologies Indian Schoolof Mines (ISM)
TechnicalUniversityofKošicewithaseatin Indian Institute of Technology
Prešov Dhanbad, Jharkhand,India
Prešov, Slovakia
LucieRuppenthalová
Dagmar Klichová Institute of Geonics of theCAS
Institute of Geonics of theCAS Ostrava-Poruba, Czech Republic
Ostrava-Poruba, Czech Republic
Grzegorz M.Krolczyk
Faculty of MechanicalEngineering
OpoleUniversity of Technology
Opole, Poland
ISSN 2195-4356 ISSN 2195-4364 (electronic)
Lecture Notesin MechanicalEngineering
ISBN978-3-319-99352-2 ISBN978-3-319-99353-9 (eBook)
https://doi.org/10.1007/978-3-319-99353-9
LibraryofCongressControlNumber:2018952477
©SpringerNatureSwitzerlandAG2019
Thisworkissubjecttocopyright.AllrightsarereservedbythePublisher,whetherthewholeorpart
of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations,
recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission
orinformationstorageandretrieval,electronicadaptation,computersoftware,orbysimilarordissimilar
methodologynowknownorhereafterdeveloped.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publicationdoesnotimply,evenintheabsenceofaspecificstatement,thatsuchnamesareexemptfrom
therelevantprotectivelawsandregulationsandthereforefreeforgeneraluse.
The publisher, the authors and the editors are safe to assume that the advice and information in this
book are believed to be true and accurate at the date of publication. Neither the publisher nor the
authorsortheeditorsgiveawarranty,expressorimplied,withrespecttothematerialcontainedhereinor
for any errors or omissions that may have been made. The publisher remains neutral with regard to
jurisdictionalclaimsinpublishedmapsandinstitutionalaffiliations.
ThisSpringerimprintispublishedbytheregisteredcompanySpringerNatureSwitzerlandAG
Theregisteredcompanyaddressis:Gewerbestrasse11,6330Cham,Switzerland
Preface
ItisverydelightfulforustowritetheintroductiontothisvolumeofLectureNotesof
MechanicalEngineeringwithsubtitle“AdvancesinManufacturingEngineeringand
Materials”. This volume comprises the papers presented during the International
Conference on Manufacturing Engineeringand Materials, held from 18 to 22 June
2018, in Nový Smokovec and organised by the Faculty of Manufacturing
Technologies TUKE in Prešov, under the auspices of the Dean of the Faculty
Dr.h.c.Prof.Ing.JozefZajac,PhD.,incollaborationwiththeInstituteofGeonics
oftheCASinOstrava-Poruba,undertheauspicesofitsDirectorIng.JosefFoldyna,
CSc., Indian Institute of Technology (Indian School of Mines), Dhanbad,
India, Faculty of Mechanical Engineering at Opole University of Technology,
Mechanical Engineering Faculty in Slavonski Brod under auspices of dean
Prof. Dr. Sc. Ivan Samardzić the TEAM International Society, under the auspices
of the President Prof. dr. sc. Dražan Kozak with the further cooperation of
Baden-Wuerttemberg Cooperative State University and Istanbul Medipol
University.
The conference captures various aspects of progress in the (un)conventional
manufacturing technologies contributing to the increase of competitiveness of
industry with regard to the sustainable development, preservation of the environ-
mentandnaturalresources.ThemainspiritoftheconferenceisYourScience=Our
Future. The conference aims at creating synergies of “practice and research”
increasing the potential and commercial viability of research and development in
the field of advanced technologies and materials in industries. The conference was
attendedbydelegatesfrom 18countries around theworld (Austria,Croatia, Czech
Republic,France,Germany,GreatBritain,Greece,India,Italy,Iran,Korea,Poland,
Russia, Serbia, Slovakia, Slovenia, Spain and Turkey). For the motivation of the
researchers, a competition for the best scientific research work in two areas, i.e.
waterjettechnologyandconventionaltechnologies,endowedwith€300,€200and
€100, has been organised during the conference. The competition was financially
supported by two companies from Germany: ANT—Applied New Technologies
and Company Klenk in Balzheim (toolmaker). In addition to the accepted papers,
the following prominent researches from renowned research institutions have been
v
vi Preface
invitedtogivekeynotelecturesintheirrespectivefieldsofcompetence:vice-rector
Prof. Dr.Sc. Dražan Kozak from J. J. Strossmayer University in Osijek, Prof. Dr.
FrankPudefromSteinbeisConsultingCentreHigh-PressureWaterjetTechnology,
Prof.Dr.JanOlafandProf.Dr.ManfredSchlatterbothfromBaden-Wuerttemberg
Cooperative State University Loerrach, Germany, Mr. Martin Marek from
EuroVienna, Dr. Witold Habrat from Rzeszow University of Technology, Poland,
Prof.SomnathChattopadhyayafromIndianInstituteofTechnologyDhanbad,Prof.
AlessandroRuggierofromUniversityofSalerno,Prof.HakanTozanfromMedipol
University and vice-rector Prof. Petr Valášek from University of Life Sciences.
A special thanks also go to Dr. Dagmar Klichová and Dr. Lucie Ruppenthalová
from the Institute of Geonics of the CAS, v.v.i, Ostrava-Poruba, for their help in
formattingofthepapers.WearealsoverygratefultoMissLeontinaDiCeccoand
Miss Divya Meiyazhagan from Springer (Lecture Notes in Mechanical
Engineering) for their endless patience during processing of this book.
The winners of the best paper are:
Water Jet Technology supported by ANT Company
GoldAward:MadhulikaSrivastava fromDepartmentofMechanicalEngineering,
Indian Institute of Technology Dhanbad, India
Silver Award: Dr. Jiří Klich and Dr. Petr Hlaváček both from the Institute of
Geonics of the CAS, v.v.i, Ostrava-Poruba, Czech Republic
Bronze Award: Dr. Dominika Lehocká from Faculty of Manufacturing
Technologies TUKE with a seat in Prešov and Dr. Michal Zeleňák from the
Institute of Geonics of the CAS, v.v.i, Ostrava-Poruba, Czech Republic
Conventional Machining supported by KLENK Company:
Gold Award: Fabian Lissek from Institute of Production Engineering and
Materials Testing, Ulm University of Applied Sciences, Germany
Silver Award: Dr. Radoslaw Maruda, Faculty of Mechanical Engineering,
University of Zielona Gora
BronzeAward:Dr.WitoldHabrat,RzeszowUniversityofTechnology,Facultyof
Mechanical Engineering and Aeronautics
Moreover, it is also a pleasure to acknowledge the support of Illimité, Lemur,
Technická Diagnostika, Prešov and media support Strojarstvo/Strojirenstvi, the
portal Veda na dosah and Vedecký kaleidoskop. The organizers hope that this
conference is a great opportunity for useful exchange of scientific opinions among
participantswithagreaterimpactontheinternationalplatformoftherelatedfields.
The book contains the collection of the rigorously peer-reviewed papers pre-
sentedattheICMEM 2018reflectingtheideasoftheresearchers fromalloverthe
world.Itincludesvariousaspectsoftheadvancementsinthefieldofmanufacturing
processes and materials that can be practically used by the industries for better
growth.
Preface vii
Smooth running of the ICMEM 2018 can be hardly imagined without the
proactive work of Management of Atrium Hotel especially. A big thanks go to
directorofthehotelandeventmanagerMgr.MiškaŽembová,thestuffofthehotel.
Big thanks go to Mgr. Ľubica Ferencová, MSc. Daniela Hatalová and MSc. Alena
Mihaľovová from Faculty of Manufacturing Technologies, for their administration
backup and to Dr. Svetlana Radchenko for arranging of Faculty brochures for
participants.
Moreover,Iwouldliketothank,namelytotwopersons,MSc.BeátaPuobišová
(ScientificToy)andMSc.MichalFigura(MagicalPhysics).Manyofusunderstood
how important is science popularisation not only for children. Everybody knows
that currently words such as Mathematics and Physics have become the worst
words ever. If you remember words from keynote address of Prof. Dražan Kozak,
there is direct correlation between economic growth and education within STEM
(science,technology,engineeringandmathematics).IthinkMSc.BeátaPuobišová
and MSc. MichalFigura remind us how curiosity in thestudents can be awakened
and how important it is. This part was finacially supported by Technická diag-
nostika, s.r.o in Prešov. Thanks also belong to Ing. Eugen Knotek, PhD., from
Vysoke Tatry town for his opening speech.
Sergej Hloch
Contents
Invited Papers
Study Programs in STEM Field in Eastern European
Countries vs. Brain Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Dražan Kozak
Manufacturing in Times of Digital Business and Industry 4.0 -
The Industrial Internet of Things Not Only Changes the World
of Manufacturing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Jan M. Olaf and Eckhart Hanser
A New Method for Gear Chamfering. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Manfred Schlatter and Niklas Müller
Water Jet Technology Session
New Approach of Recycling of Abrasives for Water Jet Cutting . . . . . . 29
Miroslav Duspara, Tomislav Palatinuš, Dejan Marić, Ivan Samardžić,
Željko Ivandić, and Antun Stoić
The Use of Areal Parameters for the Analysis of the Surface
Machined Using the Abrasive Waterjet Technology. . . . . . . . . . . . . . . . 36
Dagmar Klichová, Jiří Klich, and Tomáš Zlámal
Research on Water Jet Cutting of Polymer Composites Based
on Epoxy/Waste Fibres from Coconut Processing . . . . . . . . . . . . . . . . . 45
Müller Miroslav, Valášek Petr, Novotný Jan, Ruggiero Alessandro,
D’Amato Roberto, and Habrová Karolína
Recent Developments in Pulsating Water Jets . . . . . . . . . . . . . . . . . . . . 54
Josef Foldyna
Investigation on Pulsating Liquid Jet with Physiological Saline
on Aluminium Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Akash Nag, Sergej Hloch, Amit Rai Dixit, and Dominik Cuha
ix
x Contents
Parametric Study During Abrasive Water Jet Turning of Hybrid
Metal Matrix Composite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Ashish Kumar Srivastava, Akash Nag, Amit Rai Dixit, Sandeep Tiwari,
and Vishal Shankar Srivastava
Effect of Frequency Change During Pulsed Waterjet Interaction
with Stainless Steel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Madhulika Srivastava, Sergej Hloch, Miroslav Muller,
Monika Hromasová, Jaromír Cais, Somnath Chattopadhyaya,
Amit Rai Dixit, and Jiří Klich
Microstructure, Properties and Damage Mechanisms by Water
Jet Cutting of TiB -Ti Cermets Prepared by SPS . . . . . . . . . . . . . . . . . 97
2
Viktor Puchý, Martin Fides, Róbert Džunda, Richard Sedlák,
Jaroslav Kováčik, Sergej Hloch, Petr Hlaváček, and Pavol Hvizdoš
Investigation on Feed Rate Influence on Surface Quality in Abrasive
Water Jet Cutting of Composite Materials, Monitoring Acoustic
Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
IoanAlexandruPopan,VladBocanet,NicolaeBalc,andAlinaIoanPopan
Comparison of Non-destructive Sensing Methods on Surface
Created by Waterjet Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Jiří Klich, Dagmar Klichová, and Kamil Souček
Investigation of Limestone Cutting Efficiency by the Abrasive
Water Suspension Jet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Andrzej Perec
Erosion Test with High-speed Water Jet Applied on Surface
of Concrete Treated with Solution of Modified Lithium Silicates. . . . . . 135
Petr Hlaváček, Libor Sitek, Rudolf Hela, and Lenka Bodnárová
Analysis of Micro Continuous Water Jet Based on Numerical
Modelling and Flow Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Michal Zelenak, Zdenek Riha, Kamil Soucek, and Frank Pude
An Acoustic Emission Study of Rock Disintegration
by Pulsating Water-Jet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
RupamTripathi,SergejHloch,SomnathChattopadhyaya,PavelAdamcik,
and Alok Kumar Das
Evaluation of Possibility of AISI 304 Stainless Steel Mechanical
SurfaceTreatmentwithUltrasonicallyEnhancedPulsatingWaterJet ... 163
Dominika Lehocká, Vladimír Simkulet, Jiří Klich, Zdeněk Štorkan,
Lucie Krejčí, Ján Kepič, and Jaroslav Birčák
Non–traditional Machining of Inconel 600 Material. . . . . . . . . . . . . . . . 173
Fuat Kartal and Sergej Hloch
