ADVANCES IN ENERGY SCIENCE AND EQUIPMENT ENGINEERING 2 : proceedings of the 2nd

1161 Pages·2017·146.606 MB·English

by  Shiquan Zhou, Aragona Patty, Shiming Chen

ADVANCES IN ENERGY SCIENCE AND EQUIPMENT ENGINEERING II

PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ENERGY EQUIPMENT
SCIENCE AND ENGINEERING (ICEESE 2016), 12–14 NOVEMBER 2016, GUANGZHOU, CHINA
Advances in Energy Science and
Equipment Engineering II
Editors
Shiquan Zhou
China-EU Institute for Clean and Renewable Energy at Huazhong
University of Science and Technology, Wuhan, China
Aragona Patty
Institute of Applied Industrial Technology Division,
Portland Community College, Portland, OR, USA
Shiming Chen
College of Civil Engineering, Tongji University, Shanghai, China
VOLUME 2
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2017 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
Printed and bound in Great Britain by CPI Group (UK) Ltd, Croydon, CR0 4YY
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Published by: CRC Press/Balkema
P.O. Box 11320, 2301 EH Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-1-138-71798-5 (set of 2 volumes)
ISBN: 978-1-138-05682-4 (Vol 1)
ISBN: 978-1-138-05683-1 (Vol 2)
ISBN: 978-1-315-19610-7 (eBook)
Advances in Energy Science and Equipment Engineering II – Zhou, Patty & Chen (Eds)
© 2017 Taylor & Francis Group, London, ISBN 978-1-138-71798-5
Table of contents
Preface xxv
Organizing committees xxvii
VOLUME 1
Energy and environmental engineering
A study on the usage of activated semi-coke for COD removal in waste water treatment 3
L. Jing & M.L. Du
Research on the spontaneous combustion index of cooking oil tar in fog discharge pipes 7
Z.W. Xie, Z.P. Jiang & S.F. Gong
Determination of tetracycline-resistant bacteria and resistance genes in soils
from Tianjin 13
Y.K. Zhao, N. Wu, L. Jin, F. Yang, X.M. Wang, F.H. Liang & M. Zeng
Differences of auxin transport inhibitor treatment on several development processes
between different Nicotiana varieties seedlings 19
L.J. Zhou, X.L. Zhang, X.Y. Li, W.J. Liu, J.Q. Wu & Y.H. Pang
Cellulose refining of biobutanol 23
R.J. Chen
A study on microbial enhanced oil recovery with the synergy of organic matter CX 31
D.H. Li, Y.H. Suo, W. Li, X.L. Wu, Q. Luo, Z.W. Hou, R. Jin & R. Wang
A novel method for status diagnosis of power equipment based on feature correlation 37
J.-C. Huang
Utilization of comprehensive methods to evaluate the amount of geothermal resources
in Dongqianhu area of Ningbo, Zhejiang province 41
X.J. Cao, B.H. Li & Y. Dong
Effects of storage temperatures on the nutrition quality of Macadamia nuts during
long-term storage 45
L.-Q. Du, X.-H. Tu, Q. Fu, X.-X. Shuai, M. Zhang & F.-Y. Ma
Experimental research on the bubble behavior of the sub-cooled pool boiling process
under microgravity 49
Y.Y. Jie, H.Y. Yong, C.X. Qian & L.G. Yu
Dynamic changes in NDVI and their relationship with precipitation in Ningxia,
NW of China 53
T. Wang
Simulation analysis of photovoltaic inverter under the condition of different
solar radiation 57
M.X. Chen, S.L. Ma, L. Huang, J.W. Wu & P. Wang
Understanding Chinese environmental pollution based on the dialectics of nature 61
P. Gu & W. Teng
v
Suppression of spontaneous combustion based on “three zones” division and anti-fire
control of a large-scale coal mining space 65
Z.H. Lu, Y.Z. Zhang, P.F. Shan, C.H. Zhao & X.J. Yue
Flow field analysis of the transmission line surface in wind and sand environments
based on Fluent 71
G.R. Hua & W.H. Li
An analysis of the domestic tourists’ consumption structure and the behavioral
characteristics in tourism resources destination—based on a domestic tourism sampling
survey in Huangshan city in 2015 75
Y.R. He & J.H. Lu
An analysis of the power grid development level based on cluster analysis 79
J. Li, D. Peng, H. Li & J.F. Shi
A study on farmers’ behavior game evolution of the scale pig breeding ecological energy system 85
B.-B. Leng, Q. Hu, W.-B. Zhang & J.-L. Liu
Surface runoff harvesting in redirecting sustainable water conditions in the UPNM campus 89
M. Vikneswaran & M. Azhar
Leveling marine magnetic survey data using the wavelet multi-scale analysis 95
Q. Liu, X.D. Yin, G. Bian & J.S. Zhao
Risk assessment of surface water quality in the Beijing mountainous area 99
W.W. Zhang & H. Li
Numerical simulation of an internal flow field in a biomass high efficiency hot blast stove 103
G.J. Li & C.Y. Gu
Simulation research of the effect on gas drainage caused by the diameter of drilling in coalbeds 111
J.J. Liu, D. Wang & A. Liu
A study on the compensation mechanisms for cultivated land protection in China 117
Y.F. Yang & J.Q. Xie
Application of a high-precision magnetic survey to the investigation of mineral resources in
Huotuolewusu area, Inner Mongolia 125
Q. Liu & R.M. Peng
A statistical analysis of rainstorm-flood events and disasters in changing
environments in China 129
S.M. Liu, H. Wang, D.H. Yan & W.L. Shi
Determination of soil parameters and initial values in numerical calculations by using
experimental results 137
B.B. Xu
The longitudinal evaluation of scale pig breeding carrying capacity 143

B.-B. Leng, Q. Hu & Y.-Y. Duan
A study on the scale pig breeding trend and technical efficiency 147
B.-B. Leng, Y.-F. Xu & J.-L. Liu
A study on entropy generation in laminar free convection flow along a vertical surface
with uniform heat flux 151
L. Tian, W.H. Wang, F.Z. Wu & Z.X. Cai
Analysis of a Chinese titanium sponge enterprise’s energy usage 159
H.X. Pang, W.H. Wang, F.Z. Wu & Z.C. Wang
Risk management of carbon emission rights 167
Q. Hong
Study on new energy vehicles application strategies in transportation industry 171
L.Y. Gong
vi
Study on the theories and strategies for transportation service in China 179
L.Y. Gong
Mechanical engineering
A tracked robot system for inner surface scanning of industrial pipelines 187
H. Zhong, Z. Ling, W. Tan & W. Guo
The influence of the fuel supply rate on the power performance of the vehicle diesel engine 191
H. Yuan & J. Jin
Multi-phase flow simulation of CO leakage through minor faults 195
2
X.L. Liu, X.C. Li & Q. Chen
Application of staged fracturing technology by using a ball injection sliding sleeve
for horizontal wells’ open-hole completion in Block Ma 131 203
K. Ding, J.M. Li, N. Cheng, H.Y. Zhao, S.Z. Shi & L.R. Wang
Numerical analysis of a suitable number of rigid ribs in the hollow torsion test 207
B.B. Xu
The mechanism of the micro-EDM process 211
S.Y. Liu, Z.H. Han & Y.H. Zhu
Preparation and performance optimization of phosphorescence materials in white
light OLED devices 215
H.J. Zheng, Q. Jiang, Y.D. Jiang & Z. Ruan
A three-dimensional positioning system based on fingerprint positioning algorithm 221
Y.P. Ni, J.P. Chai, Y.X. Bai & J.B. Liu
A study on the electrical conductivity of electrospun MWNTs/PMIA nanofiber mats 227
B. He, T. Liu, C. Liu & D. Tan
Research on Changjiang river waterway maintenance vessels’ spare parts and materials
information coding 231
Q. Wen
Research on the airborne monitoring semi-physical simulation system based on beidou 235
Y.G. Sun & S.X. Wang
A study on CFD simulation of flow rate, sand concentration, and erosion rate in double
cluster hydraulic ejectors on fracturing 243
S.K. Tong, Z.W. Wang, Y.H. Dou & Z.G. Wang
Influence of geometry and operating parameters on the flow field in a cyclone furnace 249
J.X. Guo, D.Q. Cang, L.L. Zhang, D. Wang & H.F. Yin
A study on the temperature field simulation of turbocharger turbines 255
F. Cao, S.R. Wang, G.Q. Wang, P.Q. Guo & X.S. Wang
An obstacle-avoiding path planning method for robots based on improved artificial
potential field 259
B. Zhang, J. Wang, C. Tang & Q. Wang
Target course estimation for a fixed monostatic passive sonar system 263
Z. Chen, Y.C. Wang & W.G. Dai
Two-way fluid-structure coupling simulation of oil film characteristics of hollow shaft
hydrostatic bearings 269
W. Sun & X.J. Yu
Design and bench test of the powertrain for series hybrid electric loaders 275
S.S. Feng
A partial discharge data management platform based on cloud services 281
Z.X. Pan, H. Chen, H. Fu, Y.Y. Mao & G. Chen
vii
Flow simulation of transmission conductors considering the surface characteristics 285
P. Li, B. Liu, J.L. Yang, X.Z. Fei, X.P. Zhan, L.C. Zhang, K.P. Ji, B. Zhao & Y.X. Dong
Research and implementation of vehicle control systems 291
Z. Li
Research on high-frequency isolated interconnection converters and their PWM strategy
in AC/DC hybrid microgrids 295
H.J. Xue & Q.C. Tian
Research on the detecting technology of DC crosstalk with impedance 301
H. Pang, Q. Yin, Y. Ding, H.-B. Yu, B.-C. Wang & G.-Q. Pei
Research on hybrid electric vehicle power switching speeds based on ADVISOR 307
J.T. Guo, N. Wang & Z.M. Cao
The design and implementation of PCI express—SPI bus based on FPGA 311
T.Z. Lv, C.B. Xiang, X.J. Li & F. Wang
A study on the emulsifier fault diagnosis of the BP neural network based on EMD and KPCA 315
Y.S. Wang, L. Wang & H. Li
Design and experiment of the horizontal banana stalks crushing machine 321
C. Wang, E.Y. Zhang, X.R. Zhang, Y. Li & D. Liang
Design and implementation of the multi-granularity hierarchical control system of the safe
based on the mobile intelligent terminal 327
Y.H. Cao, D.W. Zhang, W.H. Wang & F.X. Zhou
A financial products’ innovation method based on modularity technology 333
Z.J. Wang, H. Yin, D. Li & J. Zhang
Research on hybrid electric vehicle power switching control strategy 339
Z.M. Cao, J.T. Guo & L. Wang
Design of a brightness wireless control system for machine vision LED light sources 343
X.J. Yan, X.D. Yang, C.Q. Xu, Q. Liu & X.L. Ju
Path planning for the multi-robot system in intelligent warehouse 349
D.L. Zhang, B. Zheng, S. Fu & X.Y. Sun
Research on non-destructive testing technology for bolt anchoring quality by using the stress
wave method 353
T.Q. Wu, N.C. Xu, B.Y. Zhao, K. Chen & C.F. Li
A study on seat state recognition based on the seating grid 359
Z.Y. Pang, M.F. Wu, W.F. Yang, H.T. Guan & H.W. Zhao
The influence of suspension parameters on the performance of vehicles 363
Y.H. Zhao, D.P. Shi & M.M. Dong
On the graph-spectrum of spatial direction relationships between object groups 369
X.M. Lu, H.W. Yan & Z.H. Wang
Numerical studies on air-decking charge in the fragmentation of concrete 375
X.-J. Li, J. Yang & B.-Q. Yan
Environmental and architectural engineering
Multi-objective vs. single objective automatic calibration of a conceptual hydrological model 381
N. Sun, J.Z. Zhou, H.R. Zhang & J. Wu
A study on measuring methods about pulverized coal concentrations in conveying pulverized
coal pipelines 387
J.L. Wang, J. Zhao, R.P. Zhang & S.G. Hu
Optimization design of residential buildings in Guangzhou based on energy consumption simulation 393
X. Li & X.G. Wu
viii
Design and construction of the key technology of the Hengqin subsea tunnel
with geomembrane bags 397
M.-Y. Li, P.-Y. Jiang & S. Wang
The resolution of lifeline bridges based on the faults position in the perspective of probability:
A case study of the Tangshan area 403
P.W. Cao & J.C. Yu
Construction techniques of the bridge deck pavement of hot-mix and warm-compact
asphaltic concrete under low temperature conditions 407
Z.Q. Cheng, Z.D. Zhao, X. Song & Y. Liu
A study on the evolution law of the tunnel seepage field in the vicinity of the compressive
torsional fault zone 413
S.Z. Yang & Z. Li
A study on treating nitrilon wastewater with Expanded Granule Sludge Bed (EGSB) 417
H.L. Li, N. Dang & H.M. Wang
Experimental study and theoretical analysis on mansard steel beam 423
J.J. Kouadjo Tchekwagep, J. Huang, Z. Zhang & W. Cui
Simulation and visualization of salty soil water and salt migration 429
L. Chai, J.C. Xie, J.C. Liang, R.G. Jiang & H. Han
Multisource data integration and three-dimensional visualization of the interbasin water
transfer project 435
X. Yu, J.C. Xie, R.G. Jiang, D.F. Yan & J.C. Liang
Numerical simulation for the propagation laws of residual shock wave after protective door
destruction in tunnel 441
Z. Liao, D.G. Tang, Z.Z. Li & R.L. Zheng
Design and treatment of landslide engineering in the Three Gorges Reservoir area 447
X. Zhang, Z.-Y. Tan & B.-Y. Gao
Infiltration analysis to evaluate the stability of two-layered slopes 451
J.-D. Huang, H. Tian & Z.-Z. Zhu
Bridge damage pattern identification based on perturbation theory 455
D. Wu & L.-J. Liu
Characteristics of debris flow in Jian Shan-bao ravine 461
A. Chen, S.-Y. Xi, R. Tao, K.-W. Liu & R.-J. Ding
Influence of loess property on ancient circumvallation deformation laws induced by metro
shield tunnelling 467
J.L. Qiu, H. Sun & J.X. Lai
Effect of axial direction on the stress state of a circular roadway in highly vertical in situ
stress fields 473
X. Xi, Q.F. Guo & P. Lv
Modeling of hydraulic fracture for concrete gravity dams considering
hydromechanical coupling 477
S. Sha & G.X. Zhang
Overview of experimental studies on the seismic performance of rectangular hollow reinforced
concrete bridge piers 483
H.G. Wu, X.L. Cao, J.S. Fan & Y. Zhao
Deformation analysis and waterproof safety estimation of GINA gaskets
in immersed tunnels 489
L.L. Chai, Y.D. Wang, X.D. Chen, Y.X. Xia & X.B. Han
In situ observation of loess landslide affected by rainfall 495
G.B. Du & W.K. Ni
ix
Experimental study on parallel strand bamboo lumber beams 499
Y.L. Li, X.H. Xiong, H.T. Li, K.W. Wu, X.C. Mei, Z.X. Zang, W. Qin, C.W. Wang,
Y. Yuan, Y.Q. Xie & Z.W. Yan
Study of the mechanical characteristics of the heavy-haul railway tunnel structure 505
Z.Q. Li, M.N. Wang & L. Yu
Characteristics of climate change in Aksu River Basin in the last 50 years 511
Q.Q. Chen, Z. Yuan, K.K. Sun & J. Feng
Study on the influence of tunnel structure on the upper drum deformation of the tunnel
bottom structure 517
Y. Luo, L. Yu, Y. Yu, Z. Yuan, T.Y. Xu & Z.Q. Li
Study on reservoir-induced seismicity in Three Gorges Reservoir 521
X.X. Zeng, X. Hu, K.Z. Su, T.G. Chang & H.B. Zhu
Water inrush and mud bursting scale prediction of tunnel in water-rich fault 525
Y.H. Tan, S.C. Li, Q.S. Zhang & Z.Q. Zhou
Incorporation of SiC nanoparticles into coatings formed on magnesium by plasma
electrolytic oxidation 531
Y. Liu, F.W. Yang, D.C. He, J.B. Zhang, B.F. Bai & F. Guo
Study of the FSI characteristics of horizontal axis wind turbine under yaw 535
X.M. Chen, X.D. Wang, X.Q. Feng, L. Liu & X.C. Hu
Brief discussion on rural landscape design in Chengdu Plain based on the demand
investigation of farmers 541
T. Jiang, S. Li, C.N. Li, J.Z. Li, L.Y. Fan & Q.B. Chen
Study of mechanical characteristics of prestressed concrete polygonal line cable-stayed bridge 547
Y.-F. Li, L. Liang, H. Zhang & S. Sun
Study on the reliability of dynamic evaluation of highway slope stability 551
Y.F. Li, Z. Guo, Z.W. Liu & S.W. Wang
Architectural form and original research of Keji Hall 555
L. Chen, L.Y. Lang & J.J. Cheng
Protection and utilization of Guangzhou’s industrial building heritage in the context
of urban renewal 559
C. Jia, L.-P. Zheng & M.-H. Wang
The calculation of the anti-floating ability for uplift piles 565
M.X. Tang & H. Chen
Polysemous real concepts and practices of traditional commercial blocks 573
X.N. Hou & L.P. Zheng
Development of early warning criteria for landslide based on internal force calculation
method of rigid piles 579
H.H. Li, W.K. Ni, Y.L. Zhang & Y.H. Wang
Three-dimensional stability analysis of highway embankment in the karst region 585
Z.M. He, S.Z. Liu & Q.F. Liu
Characteristics of satellite-based vegetation health indices in Shaanxi, China: 1982–2015 589
R.G. Jiang, J.C. Xie, F.W. Li, H.H. Liu & B. Li
Compression capacity of bolt and screw-connected built-up cold-formed steel stud column section 595
B.-K. Tan, J.-S. Lim, P.-N. Shek & K.-B.-H. Ahmad
Analysis of multi window spraying merged flame height of buildings based on FDS 599
H. Hai & J.-W. Zhang
Bearing capacity and inversion analysis of long screw drilling uplift pile 603
K.-W. Liu, W. Ling, J.-R. Shen & A. Chen
x