1756-PM002

76 Pages·2012·3.77 MB·English

by  Rockwell Automation

Logix 5000 Controllers EDS
AOP Guidelines for Logix
Designer
1756 ControlLogix, 1756 GuardLogix, 1769 CompactLogix,
1769 Compact GuardLogix, 1789 SoftLogix, 5069
CompactLogix, 5069 Compact GuardLogix, Studio 5000
Logix Emulate
Rockwell Automation Publication 1756-PM002E-EN-D - July 2022
Supersedes Publication 1756-PM002D-EN-D - March 2022
Programming Manual Original Instructions
Logix 5000 Controllers EDS AOP Guidelines for Logix Designer
Important User Information
Read this document and the documents listed in the additional resources section about installation, configuration, and
operation of this equipment before you install, configure, operate, or maintain this product. Users are required to familiarize
themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to
be carried out by suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be
impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use
or application of this equipment.
The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and
requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for
actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software
described in this manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc., is
prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
WARNING: Identifies information about practices or circumstances that can cause an explosion in a hazardous environment, which may lead to
personal injury or death, property damage, or economic loss.
ATTENTION: Identifies information about practices or circumstances that can lead to personal injury or death, property damage, or economic loss.
Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.
IMPORTANT Identifies information that is critical for successful application and understanding of the product.
Labels may also be on or inside the equipment to provide specific precautions.
SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage may be present.
BURN HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that surfaces may reach dangerous
temperatures.
ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc Flash. Arc Flash will
cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements for safe work practices and for
Personal Protective Equipment (PPE).
Rockwell Automation recognizes that some of the terms that are currently used in our industry and in this publication are not in
alignment with the movement toward inclusive language in technology. We are proactively collaborating with industry peers to
find alternatives to such terms and making changes to our products and content. Please excuse the use of such terms in our
content while we implement these changes.
2 Rockwell Automation Publication 1756-PM002E-EN-D - July 2022
Summary of changes
This manual includes new and updated information. Use these reference
tables to locate changed information.
Grammatical and editorial style changes are not included in this summary.
Global changes
This table identifies changes that apply to all information about a subject in
the manual and the reason for the change. For example, the addition of new
supported hardware, a software design change, or additional reference
material would result in changes to all of the topics that deal with that subject.
Change Topic
Added the License key section License key on page 16
New or enhanced features
None in this release.
Rockwell Automation Publication 1756-PM002E-EN-D - July 2022 3

Table of Contents
Summary of changes Studio 5000 environment ......................................................................... 10
Preface Access the attachments ............................................................................. 10
Additional resources ................................................................................... 11
Legal Notices ............................................................................................... 11
Chapter 1
Introduction References .................................................................................................. 14
Definitions, acronyms, and abbreviations............................................... 14
General EDS file information .................................................................... 14
EDS file authoring tools ...................................................................... 14
EDS file installation ............................................................................. 15
Icon files ................................................................................................ 15
License key............................................................................................. 16
Chapter 2
Create an EDS file Connections ............................................................................................... 19
Input and Output data structures and parameters ................................ 19
Input tags ............................................................................................. 20
Output tags .......................................................................................... 20
I/O parameter definition ..................................................................... 21
Configuration data structures and parameters ...................................... 22
Configuration tags .............................................................................. 22
Configuration parameter definition ..................................................23
Multiple language support ....................................................................... 25
Chapter 3
Module Configuration General tab ................................................................................................. 27
dialog boxes About Module Profile dialog box ......................................................... 29
Module Definition dialog box ............................................................. 30
Custom Data Type dialog box .......................................................32
Connection tab ........................................................................................... 33
Safety tab ..................................................................................................... 35
Module Info tab .......................................................................................... 35
Safety Configuration tab ........................................................................... 37
Internet Protocol tab ................................................................................. 38
Port Configuration tab ............................................................................... 39
Port Diagnostics dialog box ............................................................... 40
Network tab ............................................................................................... 40
Advanced Network Configuration dialog box ................................... 41
Time Sync tab ............................................................................................ 42
Rockwell Automation Publication 1756-PM002E-EN-D - July 2022 5
Table of Contents
Chapter 4
EDS file sections [File] section ............................................................................................... 43
Revision, CreateDate, CreateTime, ModDate and ModTime
keywords .............................................................................................. 44
[Device] section ......................................................................................... 44
Catalog and ProdName keywords ..................................................... 44
Catalog keyword ...................................................................................45
ProdName keyword ............................................................................ 46
VendName keyword............................................................................. 47
ProdTypeStr keyword ......................................................................... 48
MajRev keyword .................................................................................. 48
MinRev keyword.................................................................................. 49
[Device Classification] section ................................................................. 49
ClassN keyword ................................................................................... 49
[Connection Manager] section ................................................................. 49
ConnectionN keyword ........................................................................ 50
ConnectionN fields ....................................................................... 50
[ParamClass] section ................................................................................. 60
CfgAssembly keyword ......................................................................... 60
CfgAssemblyExa keyword .................................................................. 60
Descriptor keyword.............................................................................. 61
SafetyCfgAssembly keyword ............................................................... 61
[Assembly] section ...................................................................................... 61
AssemN/AssemExaN keyword ............................................................ 61
Supported uses ............................................................................... 61
Nested assemblies .......................................................................... 61
AssemN/AssemExaN fields ........................................................... 61
VariantN/VariantExaN keyword ........................................................ 63
[Params] section ........................................................................................ 64
ParamN keyword................................................................................. 64
Input/Output/Configuration details uses .................................. 64
ParamN fields ................................................................................ 64
ParamN enumeration, EnumN.......................................................... 69
[Groups] section ........................................................................................ 69
[Internationalization] section .................................................................. 69
ProdName keyword ............................................................................ 70
ParamN keyword................................................................................. 70
EnumN keyword ................................................................................. 70
GroupN keyword ................................................................................. 70
AssemN/AssemExaN keyword ........................................................... 70
ConnectionN keyword ........................................................................ 70
[Modular] section ...................................................................................... 70
6 Rockwell Automation Publication 1756-PM002E-EN-D - July 2022
Table of Contents
[Ethernet Link Class] section ................................................................... 70
[TCP/IP Interface Class] section ............................................................... 71
[DLR Class] section ................................................................................... 72
[Time Sync Class] section .......................................................................... 73
Chapter 5
Description of data types Module-Defined data type naming .......................................................... 75
and tags Tag naming................................................................................................. 76
Module-Defined data type member naming ........................................... 77
Chapter 6
Example EDS files Minimum EDS ........................................................................................... 79
Enhanced EDS, single connection .......................................................... 80
Enhanced EDS, single connection, configuration data .......................... 81
Enhanced EDS, multiple choice of connections and multiple
simultaneous connections ........................................................................ 82
Enhanced EDS, safety and standard connections .................................. 84
Index
Rockwell Automation Publication 1756-PM002E-EN-D - July 2022 7

Preface
The document provides an overview of the Logix Designer application EDS
Add-On Profile (AOP) feature, how Electronic Data Sheet (EDS) content is
used by the feature, and guidelines for creating EDS content that integrate
well within the Logix Designer application development environment. The
EDS file format for the Common Industrial Protocol (CIP) networks is defined
by ODVA.
Rockwell Automation recognizes that some of the terms that are currently
used in our industry and in this publication are not in alignment with the
movement toward inclusive language in technology. We are proactively
collaborating with industry peers to find alternatives to such terms and
making changes to our products and content. Please excuse the use of such
terms in our content while we implement these changes.
Rockwell Automation Publication 1756-PM002E-EN-D - July 2022 9
Preface
Studio 5000 environment The Studio 5000 Automation Engineering & Design Environment® combines
engineering and design elements into a common environment. The first
element is the Studio 5000 Logix Designer® application. The Logix Designer
application is the rebranding of RSLogix 5000® software and will continue to
be the product to program Logix 5000™ controllers for discrete, process,
batch, motion, safety, and drive-based solutions.
The Studio 5000® environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. The Studio
5000 environment is the one place for design engineers to develop all
elements of their control system.
Access the attachments The attachments in this PDF file contain EDS files to assist with
configuration.
To use an EDS file, select the attachments link shown in the left ribbon of
the PDF and open the applicable EDS file. If the PDF file opens in a browser
and the attachment link does not show, save the PDF file to a computer and
then reopen the PDF file to view the attachment symbol.
Number Description
Attachment symbol.
10 Rockwell Automation Publication 1756-PM002E-EN-D - July 2022