Volume I: Static and Dynamic Analyses

881 Pages·2011·40.17 MB·English

Abaqus Example Problems Manual
Abaqus 6.11
Example Problems Manual
Volume I: Static and Dynamic Analyses
AbaqusVersion6.11ID:
Printed on:

Abaqus
Example Problems Manual
Volume I
AbaqusVersion6.11ID:
Printed on:
Legal Notices
CAUTION:ThisdocumentationisintendedforqualifieduserswhowillexercisesoundengineeringjudgmentandexpertiseintheuseoftheAbaqus
Software.TheAbaqusSoftwareisinherentlycomplex,andtheexamplesandproceduresinthisdocumentationarenotintendedtobeexhaustiveortoapply
toanyparticularsituation.Usersarecautionedtosatisfythemselvesastotheaccuracyandresultsoftheiranalyses.
DassaultSystèmesanditssubsidiaries,includingDassaultSystèmesSimuliaCorp.,shallnotberesponsiblefortheaccuracyorusefulnessofanyanalysis
performedusingtheAbaqusSoftwareortheprocedures,examples,orexplanationsinthisdocumentation.DassaultSystèmesanditssubsidiariesshallnot
beresponsiblefortheconsequencesofanyerrorsoromissionsthatmayappearinthisdocumentation.
TheAbaqusSoftwareisavailableonlyunderlicensefromDassaultSystèmesoritssubsidiaryandmaybeusedorreproducedonlyinaccordancewiththe
termsofsuchlicense.Thisdocumentationissubjecttothetermsandconditionsofeitherthesoftwarelicenseagreementsignedbytheparties,or,absent
suchanagreement,thethencurrentsoftwarelicenseagreementtowhichthedocumentationrelates.
Thisdocumentationandthesoftwaredescribedinthisdocumentationaresubjecttochangewithoutpriornotice.
NopartofthisdocumentationmaybereproducedordistributedinanyformwithoutpriorwrittenpermissionofDassaultSystèmesoritssubsidiary.
TheAbaqusSoftwareisaproductofDassaultSystèmesSimuliaCorp.,Providence,RI,USA.
©DassaultSystèmes,2011
Abaqus,the3DSlogo,SIMULIA,CATIA,andUnifiedFEAaretrademarksorregisteredtrademarksofDassaultSystèmesoritssubsidiariesintheUnited
Statesand/orothercountries.
Othercompany,product,andservicenamesmaybetrademarksorservicemarksoftheirrespectiveowners. Foradditionalinformationconcerning
trademarks,copyrights,andlicenses,seetheLegalNoticesintheAbaqus6.11ReleaseNotes.
AbaqusVersion6.11ID:
Printed on:
Locations
SIMULIAWorldwideHeadquarters RisingSunMills,166ValleyStreet,Providence,RI02909–2499,Tel:[phone],
Fax:[phone],[email protected],http://www.simulia.com
SIMULIAEuropeanHeadquarters Stationsplein8-K,6221BTMaastricht,TheNetherlands,Tel:[phone],
Fax:[phone],[email protected]
DassaultSystèmes’CentersofSimulationExcellence
UnitedStates Fremont,CA,Tel:[phone],[email protected]
WestLafayette,IN,Tel:[phone],[email protected]
Northville,MI,Tel:[phone],[email protected]
Woodbury,MN,Tel:[phone],[email protected]
Beachwood,OH,Tel:[phone],[email protected]
WestChester,OH,Tel:[phone],[email protected]
Warwick,RI,Tel:[phone],[email protected]
Lewisville,TX,Tel:[phone],[email protected]
Australia RichmondVIC,Tel:[phone],[email protected]
Austria Vienna,Tel:[phone],[email protected]
Benelux Maarssen,TheNetherlands,Tel:[phone],[email protected]
Canada Toronto,ON,Tel:[phone],[email protected]
China Beijing,P.R.China,Tel:[phone],[email protected]
Shanghai,P.R.China,Tel:[phone],[email protected]
Finland Espoo,Tel:[phone],[email protected]
France VelizyVillacoublayCedex,Tel:[phone],[email protected]
Germany Aachen,Tel:[phone],[email protected]
Munich,Tel:[phone],[email protected]
India Chennai,TamilNadu,Tel:[phone],[email protected]
Italy LainateMI,Tel:[phone],[email protected]
Japan Tokyo,Tel:[phone],[email protected]
Osaka,Tel:[phone],[email protected]
Yokohama-shi,Kanagawa,Tel:[phone],[email protected]
Korea Mapo-Gu,Seoul,Tel:[phone],[email protected]
LatinAmerica PuertoMadero,BuenosAires,Tel:[phone],[email protected]
Scandinavia Västerås,Sweden,Tel:[phone],[email protected]
UnitedKingdom Warrington,Tel:[phone],[email protected]
AuthorizedSupportCenters
Czech&SlovakRepublics Synermas.r.o.,Psáry,Prague-West,Tel:[phone],[email protected]
Greece 3DimensionalDataSystems,Crete,Tel:[phone],[email protected]
Israel ADCOM,Givataim,Tel:[phone],[email protected]
Malaysia WorleyParsonsAdvancedAnalysis,KualaLumpur,Tel:[phone],[email protected]
NewZealand MatrixAppliedComputingLtd.,Auckland,Tel:[phone],[email protected]
Poland BudSoftSp.zo.o.,Poznań,Tel:[phone],[email protected]
Russia,Belarus&Ukraine TESISLtd.,Moscow,Tel:[phone],[email protected]
Singapore WorleyParsonsAdvancedAnalysis,Singapore,Tel:[phone],[email protected]
SouthAfrica FiniteElementAnalysisServices(Pty)Ltd.,Parklands,Tel:[phone],[email protected]
Spain&Portugal PrincipiaIngenierosConsultores,S.A.,Madrid,Tel:[phone],[email protected]
Taiwan SimutechSolutionCorporation,Taipei,R.O.C.,Tel:[phone],[email protected]
Thailand WorleyParsonsAdvancedAnalysis,Singapore,Tel:[phone],[email protected]
Turkey A-ZtechLtd.,Istanbul,Tel:[phone],[email protected]
Completecontactinformationisavailableathttp://www.simulia.com/locations/locations.html.
AbaqusVersion6.11ID:
Printed on:
Preface
ThissectionlistsvariousresourcesthatareavailableforhelpwithusingAbaqusUnifiedFEAsoftware.
Support
Both technical engineering support (for problems with creating a model or performing an analysis) and
systemssupport(forinstallation,licensing, andhardware-relatedproblems)forAbaqusareofferedthrough
anetworkoflocalsupportoffices. RegionalcontactinformationislistedinthefrontofeachAbaqusmanual
andisaccessiblefromtheLocationspageatwww.simulia.com.
Support for SIMULIA products
SIMULIA provides a knowledge database of answers and solutions to questions that we have answered,
as well as guidelines on how to use Abaqus, SIMULIA Scenario Definition, Isight, and other SIMULIA
products. You can also submit new requests for support. All support incidents are tracked. If you contact
usbymeansoutsidethesystemtodiscussanexistingsupportproblemandyouknowtheincidentorsupport
requestnumber,pleasementionitsothatwecanconsultthedatabasetoseewhatthelatestactionhasbeen.
Many questions about Abaqus can also be answered by visiting the Products page and the Support
page atwww.simulia.com.
Anonymous ftp site
To facilitate data transfer with SIMULIA, an anonymous ftp account is available on the computer
ftp.simulia.com. Loginasuseranonymous,andtypeyoure-mailaddressasyourpassword. Contactsupport
before placing filesonthesite.
Training
Alloffices and representativesoffer regularly scheduled public training classes. The coursesare offered in
a traditional classroom form and via the Web. We also provide training seminars at customer sites. All
training classes and seminars include workshops to provide as much practical experience with Abaqus as
possible. Forascheduleanddescriptionsofavailableclasses,seewww.simulia.comorcallyourlocaloffice
or representative.
Feedback
WewelcomeanysuggestionsforimprovementstoAbaqussoftware,thesupportprogram,ordocumentation.
We will ensure thatany enhancement requestsyou make are considered for future releases. If you wish to
makeasuggestionabouttheserviceorproducts,refertowww.simulia.com. Complaintsshouldbeaddressed
bycontactingyourlocalofficeorthroughwww.simulia.combyvisitingtheQualityAssurancesectionof
the Support page.
AbaqusVersion6.11ID:
Printed on:
CONTENTS
Contents
Volume I
1. Static Stress/DisplacementAnalyses
Staticand quasi-static stress analyses
Axisymmetricanalysisofboltedpipeflangeconnections 1.1.1
Elastic-plasticcollapseofathin-walledelbowunderin-planebendingandinternal
pressure 1.1.2
Parametricstudyofalinearelasticpipelineunderin-planebending 1.1.3
Indentationofanelastomericfoamspecimenwithahemisphericalpunch 1.1.4
Collapse ofaconcreteslab 1.1.5
Jointedrockslope stability 1.1.6
Notchedbeam undercyclicloading 1.1.7
Uniaxialratchettingundertensionandcompression 1.1.8
Hydrostaticfluidelements: modelinganairspring 1.1.9
Shell-to-solidsubmodelingandshell-to-solidcouplingofapipejoint 1.1.10
Stress-freeelementreactivation 1.1.11
Transientloadingofaviscoelasticbushing 1.1.12
Indentationofathickplate 1.1.13
Damageandfailureofalaminatedcompositeplate 1.1.14
Analysisofanautomotivebootseal 1.1.15
Pressurepenetrationanalysisofanairductkissseal 1.1.16
Self-contactinrubber/foamcomponents: jouncebumper 1.1.17
Self-contactinrubber/foamcomponents: rubbergasket 1.1.18
Submodelingofastackedsheetmetalassembly 1.1.19
Axisymmetricanalysisofathreadedconnection 1.1.20
Directcyclicanalysisofacylinderheadundercyclicthermal-mechanicalloadings 1.1.21
Erosionofmaterial(sandproduction)inanoilwellbore 1.1.22
Submodelstressanalysisofpressurevesselclosurehardware 1.1.23
Usingacompositelayuptomodelayachthull 1.1.24
Buckling and collapse analyses
Snap-throughbucklinganalysisofcirculararches 1.2.1
Laminatedcompositeshells: bucklingofacylindricalpanelwithacircularhole 1.2.2
Bucklingofacolumnwithspotwelds 1.2.3
Elastic-plasticK-framestructure 1.2.4
Unstablestaticproblem: reinforcedplateundercompressiveloads 1.2.5
Bucklingofanimperfection-sensitivecylindricalshell 1.2.6
i
Abaqus ID:exa-toc
Printed on: Fri March 25 -- 17:19:54 2011
CONTENTS
Forming analyses
Upsettingofacylindricalbillet: quasi-staticanalysiswithmesh-to-meshsolution
mapping(Abaqus/Standard)andadaptivemeshing(Abaqus/Explicit) 1.3.1
Superplasticformingofarectangularbox 1.3.2
Stretchingofathinsheetwithahemisphericalpunch 1.3.3
Deepdrawingofacylindricalcup 1.3.4
Extrusionofacylindricalmetalbarwithfrictionalheatgeneration 1.3.5
Rollingofthickplates 1.3.6
Axisymmetricformingofacircularcup 1.3.7
Cup/troughforming 1.3.8
Forgingwithsinusoidaldies 1.3.9
Forgingwithmultiplecomplexdies 1.3.10
Flatrolling: transientandsteady-state 1.3.11
Section rolling 1.3.12
Ring rolling 1.3.13
Axisymmetricextrusion: transientandsteady-state 1.3.14
Two-stepformingsimulation 1.3.15
Upsettingofacylindricalbillet: coupledtemperature-displacementandadiabatic
analysis 1.3.16
Unstablestaticproblem: thermalformingofametalsheet 1.3.17
InertiaweldingsimulationusingAbaqus/StandardandAbaqus/CAE 1.3.18
Fracture and damage
Aplatewithapart-throughcrack: elasticlinespringmodeling 1.4.1
Contourintegralsforaconicalcrackinalinearelasticinfinitehalfspace 1.4.2
Elastic-plasticlinespringmodelingofafinitelengthcylinderwithapart-throughaxial
flaw 1.4.3
Crackgrowthinathree-pointbendspecimen 1.4.4
Analysisofskin-stiffenerdebondingundertension 1.4.5
Failureofbluntnotchedfibermetallaminates 1.4.6
Debondingbehaviorofadoublecantileverbeam 1.4.7
Debondingbehaviorofasinglelegbendingspecimen 1.4.8
Postbucklingandgrowthofdelaminationsincompositepanels 1.4.9
Import analyses
Springbackoftwo-dimensionaldrawbending 1.5.1
Deepdrawingofasquarebox 1.5.2
2. DynamicStress/DisplacementAnalyses
Dynamic stress analyses
Nonlineardynamicanalysisofastructurewithlocalinelasticcollapse 2.1.1
DetroitEdisonpipewhipexperiment 2.1.2
ii
Abaqus ID:exa-toc
Printed on: Fri March 25 -- 17:19:54 2011
CONTENTS
Rigidprojectileimpactingerodingplate 2.1.3
Erodingprojectileimpactingerodingplate 2.1.4
Tennis racketand ball 2.1.5
Pressurizedfueltankwithvariableshellthickness 2.1.6
Modelingofanautomobilesuspension 2.1.7
Explosivepipe closure 2.1.8
Kneebolsterimpactwithgeneralcontact 2.1.9
Crimpformingwithgeneralcontact 2.1.10
Collapseofastackofblockswithgeneralcontact 2.1.11
Caskdropwithfoam impactlimiter 2.1.12
Obliqueimpactofacopperrod 2.1.13
Watersloshinginabaffledtank 2.1.14
Seismicanalysisofaconcretegravitydam 2.1.15
Progressivefailureanalysisofthin-wallaluminumextrusionunderquasi-staticand
dynamic loads 2.1.16
Impactanalysisofapawl-ratchetdevice 2.1.17
High-velocityimpactofaceramictarget 2.1.18
Mode-based dynamic analyses
Analysisofarotatingfanusingsubstructuresandcyclicsymmetry 2.2.1
LinearanalysisoftheIndianPointreactorfeedwaterline 2.2.2
Responsespectraofathree-dimensionalframebuilding 2.2.3
Brake squealanalysis 2.2.4
Dynamicanalysisofantennastructureutilizingresidualmodes 2.2.5
Steady-statedynamicanalysisofavehiclebody-in-whitemodel 2.2.6
Eulerian analyses
Rivetforming 2.3.1
Impactofawater-filledbottle 2.3.2
Co-simulation analyses
Closureofanair-filleddoorseal 2.4.1
Dynamicimpactofascooterwithabump 2.4.2
iii
Abaqus ID:exa-toc
Printed on: Fri March 25 -- 17:19:54 2011
CONTENTS
Volume II
3. Tire and Vehicle Analyses
Tire analyses
Symmetricresultstransferforastatictireanalysis 3.1.1
Steady-staterollinganalysisofatire 3.1.2
Subspace-basedsteady-statedynamictireanalysis 3.1.3
Steady-statedynamicanalysisofatiresubstructure 3.1.4
Coupledacoustic-structuralanalysisofatirefilledwithair 3.1.5
Importofasteady-staterollingtire 3.1.6
AnalysisofasoliddiscwithMullinseffectandpermanentset 3.1.7
TreadwearsimulationusingadaptivemeshinginAbaqus/Standard 3.1.8
Dynamicanalysisofanair-filledtirewithrollingtransporteffects 3.1.9
Acousticsinacircularductwithflow 3.1.10
Vehicle analyses
Inertiareliefinapick-uptruck 3.2.1
Substructureanalysisofapick-uptruckmodel 3.2.2
Displaybodyanalysisofapick-uptruckmodel 3.2.3
Continuummodelingofautomotivespotwelds 3.2.4
Occupant safety analyses
Seatbeltanalysisofasimplifiedcrashdummy 3.3.1
Sidecurtainairbagimpactortest 3.3.2
4. Mechanism Analyses
Resolvingoverconstraintsinamulti-bodymechanismmodel 4.1.1
Crank mechanism 4.1.2
Snubber-arm mechanism 4.1.3
Flap mechanism 4.1.4
Tail-skidmechanism 4.1.5
Cylinder-cam mechanism 4.1.6
Driveshaftmechanism 4.1.7
Geneva mechanism 4.1.8
Trailingedgeflapmechanism 4.1.9
Substructureanalysisofaone-pistonenginemodel 4.1.10
Applicationofbushingconnectorsintheanalysisofathree-pointlinkage 4.1.11
Gearassemblies 4.1.12
5. HeatTransferandThermal-StressAnalyses
Thermal-stressanalysisofadiscbrake 5.1.1
iv
Abaqus ID:exa-toc
Printed on: Fri March 25 -- 17:19:54 2011