Table Of ContentBIODENTAL ENGINEERING V
PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON BIODENTAL ENGINEERING,
PORTO, PORTUGAL, 22–23 JUNE 2018
Biodental Engineering V
Editors
J. Belinha
Instituto Politécnico do Porto, Porto, Portugal
R.M. Natal Jorge, J.C. Reis Campos, Mário A.P. Vaz &
João Manuel R.S. Tavares
Universidade do Porto, Porto, Portugal
CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business
© 2019 Taylor & Francis Group, London, UK
Typeset by V Publishing Solutions Pvt Ltd., Chennai, India
All rights reserved. No part of this publication or the information contained herein may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
by photocopying, recording or otherwise, without written prior permission from the publisher.
Although all care is taken to ensure integrity and the quality of this publication and the information
herein, no responsibility is assumed by the publishers nor the author for any damage to the property or
persons as a result of operation or use of this publication and/or the information contained herein.
Library of Congress Cataloging-in-Publication Data
Names: International Conference on Biodental Engineering (5th: 2018: Porto, Portugal),
author. | Belinha, Jorge, editor. | Jorge, Renato M. Natal editor. |
Campos, J.C. Reis, editor. | Vaz, Mario A.P., editor. | Tavares, Joao Manuel R.S., editor.
Title: Biodental engineering V: proceedings of the 5th International
Conference on Biodental Engineering, Porto, Portugal, 22–23 June 2018 /
editors, J. Belinha, R.M. Natal Jorge, J.C. Reis Campos, Mario A.P. Vaz &
Joao Manuel R.S. Tavares.
Description: London, UK; Boca Raton, FL: Taylor & Francis Group, [2019] |
Includes bibliographical references and index.
Identifiers: LCCN 2019000506 (print) | LCCN 2019001080 (ebook) |
ISBN 9780429265297 (ebook) | ISBN 9780367210878 (hardcover: alk. paper)
Subjects: | MESH: Dental Materials | Biocompatible Materials | Dental Implants |
Biomedical Technology | Medical Informatics | Tissue Engineering | Congress
Classification: LCC RK652.5 (ebook) | LCC RK652.5 (print) | NLM WU 190 | DDC 617.6/95--dc23
LC record available at https://lccn.loc.gov/2019000506
Published by: CRC Press/Balkema
Schipholweg 107C, 2316 XC Leiden, The Netherlands
e-mail: [email protected]
www.crcpress.com – www.taylorandfrancis.com
ISBN: 978-0-367-21087-8 (Hbk)
ISBN: 978-0-429-26529-7 (eBook)
Biodental Engineering V – Belinha et al. (Eds)
© 2019 Taylor & Francis Group, London, ISBN 978-0-367-21087-8
Table of contents
Preface ix
Acknowledgement xi
Scientific committee xiii
Numerical analysis of titanium hybrid-plates in atrophic maxilla 1
M. Prados-Privado, H. Diederich, S.A. Gehrke & J.C. Prados-Frutos
Effects of introducing gap constraints in the masticatory system: A finite element study 5
S.E. Martinez Choy, J. Lenz, K. Schweizerhof & H.J. Schindler
Influence of temperature on the dimensional stability of an addition silicone 11
C.F. Almeida, F. Dantas, A. Portela, M. Vasconcelos & J.C. Reis Campos
Computational analysis for stress intensity factor (KI) measuring in metal-ceramic interface 15
E.M.M. Fonseca, J.F. Piloto, M.G. Fernandes & R.M. Natal Jorge
Thermal stimulation of dentinal tubules 19
P.A.G. Piloto & J.F. Piloto
Analysis tool of skills’ acquisition in fine motor skill 25
R.D. Lopes, S. Castro, M.J. Ponces, N. Ramos & M. Vaz
A new approach in 3D finite element analysis in restorative dentistry 27
C. Özcan, C. Muraille, P. Lestriez & Y. Josset
Biological behavior of titanium, zirconia or PEEK dental implant-abutments 31
M.B. Sordi, S.N.D. Sarwer-Foner, F.H. Schünemann, K. Apaza-Bedoya,
G.M.P. Juanito, B. Henriques, R.S. Magini & C.A.M. Benfatti
Dental implants fatigue life: A probabilistic fatigue study 43
M. Prados-Privado, S.A. Gehrke, R. Rojo & J.C. Prados-Frutos
Micromorphology, microstructure and micro-Raman spectroscopy of a case
of amelogenesis imperfecta 47
S. Arroyo Bote, A. Villa-Vigil, M.C. Manzanares Céspedes & E. Brau-Aguadé
Influence of resin composite cement on the final color of fixed rehabilitation 53
J.F. Piloto, C.A.M. Volpato, P. Rocha, P.J. Almeida, C. Silva & P. Vaz
Clinical determination of chewing side 57
I. Fediv, A. Carvalho, A. Correia & P. Fonseca
Finishing and polishing of acrylic resins used in provisional restorations 61
S. Matos, F. Araujo, A. Correia & S. Oliveira
3D analysis of the clinical results of VISTA technique combined with connective
tissue graft 65
D.S. Martins, L. Azevedo, N. Santos, T. Marques, C. Alves & A. Correia
3D analysis of rest seats in clinical environment 75
M. Pimenta, F. Araujo, T. Marques, P. Fonseca & A. Correia
Hyaluronic acid vs chlorhexidine in mandibular molar extractions 79
A.A. Martins, B. Leitão, T. Borges, M. Pereira, A. Correia & R. Figueiredo
v
Research of oral health information by patients of a University dental clinic 83
H. Costa, B. Oliveira, A. Oliveira & A. Correia
Effect of bleaching on microleakage of class V composite resin restorations – in vitro study 89
T. Pereira, A. Azevedo, M. Vasconcelos, P. Mesquita, M.T. Carvalho & C.F. Almeida
Influence of the Er,Cr:YSGG laser and radial firing tips on the push-out bond strength
of glass fiber posts 95
A.I. Araújo, M. Martins, J.C. Reis Campos, A. Barros, A. Azevedo & T. Oliveira
Trigeminal nerve – interdisciplinarity between the areas of dentistry and audiology 101
F. Gentil, J.C. Reis Campos, M. Parente, C.F. Santos, B. Areias & R.M. Natal Jorge
Facial nerve—a clinical and anatomical review 105
F. Gentil, J.C. Reis Campos, M. Parente, C.F. Santos, B. Areias & R.M. Natal Jorge
Prenatal ultrasound features in a case of Arnold Chiari malformation 109
B. Fernandes, I. Côrte-Real, P. Vaz, R. Nogueira, F. Valente & A.C. Braga
Relevance of facial features in ultrasound diagnosis of Holoprosencephaly 111
B. Fernandes, I. Côrte-Real, P. Mesquita, M.H. Figueiral, P. Vaz & F. Valente
Orthodontic stainless steel wire and nickel release 113
S. Castro, M.J. Ponces, J.D. Lopes, M. Vasconcelos, J.C. Reis Campos & C. Pollmann
Influence of thermocycling and colorants in the color of a bis-acryl composite
resin—in vitro study 115
M.G.F. de Macedo, C.A.M. Volpato, B.A.P.C. Henriques, P.C. Vaz,
F.S. Silva & C.F.C.L. Silva
Flexible prosthesis in polyamide: Literature revision 119
R.F.A. da Costa, M.H. Figueiral, M. Sampaio-Fernandes,
S. Oliveira & J.C. Reis Campos
Application of chitosan in dentistry—a review 123
J.M.S. Gomes, J. Belinha & R.M. Natal Jorge
Computational simulation of the vestibular system using a meshless particle method 129
C.F. Santos, M. Parente, J. Belinha, R.M. Natal Jorge & F. Gentil
Using meshless methods to simulate the free vibrations of the cupula under
pathological conditions 135
C.F. Santos, M. Parente, J. Belinha, R.M. Natal Jorge & F. Gentil
Development of an image processing based algorithm to define trabecular bone
mechanical properties using the fabric tensor concept 141
M. Marques, J. Belinha, R.M. Natal Jorge & A.F. Oliveira
A homogenization multiscale procedure for trabecular bone tissue using meshless methods 147
M. Marques, J. Belinha, R.M. Natal Jorge & A.F. Oliveira
Bone remodeling mathematical models using advanced discretization techniques: A review 155
M.M.A. Peyroteo, J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge
Predicting the trabecular architecture in the vicinity of natural teeth: A comparison
between finite elements and meshless methods 161
M.M.A. Peyroteo, J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge
Comparing the stress distribution between atrophic maxillary rehabilitation techniques
using FEM 167
K.F. Vargas, G.A.R. Caldas, J. Belinha, R.M. Natal Jorge, P.A.G. Hernandez,
A. Ozkomur, R. Smidt, M.M. Naconecy & L.E. Schneider
The numerical analysis of 4-On-Pillars technique using meshless methods 171
K.F. Vargas, G.A.R. Caldas, J. Belinha, R.M. Natal Jorge, P.A.G. Hernandez,
A. Ozkomur, R. Smidt, M.M. Naconecy & L.E. Schneider
vi
Numerical analysis of support structures on an adhesive dental bridge 177
G.A.R. Caldas, J. Belinha & R.M. Natal Jorge
Predicting in-silico structural response of dental restorations using meshless methods 183
G.A.R. Caldas, J. Belinha & R.M. Natal Jorge
Using meshless methods to analyse bone remodelling after the insertion
of a femoral implant 189
A.T.A. Castro, M.M.A. Peyroteo, J. Belinha & R.M. Natal Jorge
Using meshless methods to predict in-silico the stress distribution around
bone sarcoma 195
A.T.A. Castro, J. Belinha, E.M.M. Fonseca, R.M. Natal Jorge,
V.C.C. Oliveira & A.F. Oliveira
Using meshless methods to predict the biomechanical behaviour of red blood cells 201
S.D. Ferreira, J. Belinha & R.M. Natal Jorge
The computational mechanical simulation of healthy and pathological red blood cells
with meshless methods 207
S.D. Ferreira, J. Belinha & R.M. Natal Jorge
Predicting the stress distribution in the mandible bone due to the insertion of implants:
A meshless method study 213
H.I.G. Gomes, J. Belinha & R.M. Natal Jorge
Studying the mandible bone tissue remodelling in the vicinity of implants using
a meshless method computational framework 219
H.I.G. Gomes, J. Belinha & R.M. Natal Jorge
Computational structural analysis of dental implants using radial point interpolation
meshless methods 225
C.C.C. Coelho, J. Belinha & R.M. Natal Jorge
The biomechanical simulation of a zygomatic bar implant using meshless methods 231
C.C.C. Coelho, J. Belinha & R.M. Natal Jorge
Wound healing angiogenesis: An overview on mathematical models 237
A.C. Guerra, J. Belinha & R.M. Natal Jorge
The influence of a blood clot in hemodynamics: A meshless method study 245
M.I.A. Barbosa, J. Belinha & R.M. Natal Jorge
Author index 251
vii
Biodental Engineering V – Belinha et al. (Eds)
© 2019 Taylor & Francis Group, London, ISBN 978-0-367-21087-8
Preface
Dentistry is a branch of medicine with peculiarities and diverse areas of action, being commonly
considered as an interdisciplinary area. The development, validation and clinical use of better and more
advanced techniques and technologies has led to greater demand and more interest.
Biodental Engineering V contains the full papers presented at the 5th International Conference on
Biodental Engineering (BIODENTAL 2018, Porto, Portugal, 22–23 June 2018). The conference had
two workshops, one of them dealing with computational imaging combined with finite element method,
the other dealing with bone tissue remodelling models. Additionally, the conference had three special
sessions and sixty contributed presentations.
The topics discussed in Biodental Engineering V include:
Aesthetics
Bioengineering
Biomaterials
Biomechanical disorders
Biomedical devices
Computational bio-imaging and visualization
Computational methods
Dental medicine
Experimental mechanics
Signal processing and analysis
Implantology
Minimally invasive devices and techniques
Orthodontics
Prosthesis and orthosis
Simulation
Software development
Telemedicine
Tissue engineering
Virtual reality
The purpose of the Series of BIODENTAL Conferences on Biodental Engineering, initiated in 2009, is
to perpetuate knowledge on bioengineering applied to dentistry, by promoting a comprehensive forum
for discussion on recent advances in related fields in order to identify potential collaboration between
researchers and end-users from different sciences.
The conference co-chairs would like to take this opportunity to express their gratitude to the conference
sponsors, all members of the conference scientific committee, invited lecturers, session-chairs and to all
authors for submitting and sharing their knowledge.
J. Belinha
R.M. Natal Jorge
J.C. Reis Campos
Mário A.P. Vaz
João Manuel R.S. Tavares
ix
