APM Parameters Pocket Guide

121 Pages·2003·0.44 MB·English

Honeywell
T otalPlant APM
Parameters Pocket Guide
AP09-641
12/03
CONTENTS
Introduction 2
Description of Parameter Definitions 2
Point Types 4
Algorithms 5
Parameters Per Point Type 6
Parameters Per Algorithm Type 28
Parameter Definitions 66

Copyright 2003 - Honeywell International
Introduction
This guide contains definitions of the parameters for TPN Release 650 used in the Advanced Process Manager (APM) and
Network Interface Module (NIM). This guide is a condensed version of the PM Family Parameter Reference
Dictionary.

Description of Parameter Definitions
The parameter definitions in this guide are listed alphabetically by parameter name. Each parameter
Definition contains the parameter name, description, data type, access lock, default, and range.

Parameter
The Parameter column contains the short name (up to 8 characters) of the parameters. The parameter
names are listed in alphabetical order.

Description
The Description column contains the long name of the parameter.

Type
Abbreviations in the Type column have the following meaning:

A = ASCII I = Integer S = String
BR = Blind Record L = Logical SDE = Self Def. Enumeration
e: = enumeration P = Parameter Identifier T = Time
E = Entity.Parameter R = Real U = Universal Entity.Parameter

Lock
Entries in the Lock column define who or what can change the parameter's value or option.
2
The following chart shows who/what can change the parameter's value for each access lock. Access level
defines who or what is requesting a parameter value or option change.

Access Level
Lock Oper Supr Engr Cont APMMCc Prog PB
Oper • • • • • • •
Supr • • • • • •
Eng or Eg • • • • •
OnProc • • •
Supr/Eng • •
EgOnly •
Prog • • • •
Eng/PB • •
PB •
View

Note:

Cont = Continuous_Control (from a Module on the LCN) APMMCc = PMM_Continous_Control (from PMM)
Eng/PB = Engineer or Point Builder Prog = CL/PM Sequence Program
EgOnly = Engineer Only Supr = Supervisor
Engr or Eg = Engineer Supr/Eng = Supervisor or Engineer
OnProc = On Process Special = see full PRD
Oper = Operator View = Read Only
PB = Point Builder

3
(Default) and Range
The default value and range for the parameter are listed in this column. The default value is the value assigned by the system when
the user does not make an entry for the respective parameter. The default value is enclosed by parentheses ( ). The range of the
value is listed to the right of the parentheses. See Full PRD means the explanation is lengthy; refer to the same parameter in the
APM Parameter Reference Dictionary.

Point Types
Abbreviation Definition Abbreviation Definition

AnalgIn, AI Analog Input LLMUX Low Level Multiplexer*
AnalgOut, AO Analog Output Logic Logic
Array Array NIM Network Interface Module
Box APM Box Numeric Box Numeric
DevCtl Device Control PI Pulse Input*
DigComp Digital Composite ProcMod Process Module
DigIn, DI Digital Input RegCtL Regulatory Control
DigOut, DO Digital Output RegPV Regulatory PV
Flag Box Flag SDI Serial Device Interface
IOP Input/Output SI Serial Interface
Processor STI Smart Field Transmitter*
Timer Box Timer
UCN Universal Control Network

*These are subsets of the Analog Input type
4
Algorithms

Abbreviation Definition

AutoMan Auto Manual CtL Algo
CaLcuLtr Calculator PV Algo
DataAcq Data Acquisition PV Algo
FlowComp Flow Compensation PV Algo
GenLin General Linearity PV Algo
HiLoAvg High-Low Average PV Algo
IncrSum Incremental Summer CtL Algo
MidOf3 Middle Of Three PV Algo
MulDiv Multiply/Divide CtL Algo
ORSel Override Selector CtL Algo
Pid Proportional, Integral, and Derivative CtL Algo
PidErfb PID With External Reset Feedback CtL Algo
PidFf PID With Feedforward CtL Algo
PidPosPr PID With Position Proportional
PosProp Position Proportional CtL Algo
RampSoak Ramp Soak CtL Algo
RatioCtL Ratio Control CtL Algo
Summer Summer PV Algo
Summer Summer CtL Algo
Switch Switch CtL Algo
TotaLizr Totalizer PV Algo
VdtLdLag Variable Deadtime With Lead Lag PV Algo

5
Parameters Per Point Type
Analog Input
The parameters of the Analog Input Data point are listed below in alphabetical order.
(F) indicates that the parameter is applicable when the PNTFORM = Full.

$ALDLOPT (F) MODNUM PVEULO PVROCPPR (F)
$AUXUNIT (F) NAME PVEXEUHI PVROCPTP (F)
$CDETAIL NODENUM PVEXEULO PVSOURCE (F)
$OLDEVDS NODETYP PVEXHIFL PVSRCOPT (F)
ALENBST (F) NTWKNUM PVEXLOFL PVSTS
ASSOCDSP OTDENBLE PVFORMAT PVTEMP
AVDELTHS OVERVAL (F) PVHHFL PVTV (F)
AVSTS PIUOTDCF PVHHPR (F) PVTVP (F)
BADPVFL (F) PNTFORM PVHHTP (F) RJTEMP
BADPVPR (F) PNTMODTY PVHIFL S1
C1, C2 PNTNODTY PVHIPR (F) SECVAR
CJTACT PNTSTATE PVHITP (F) SENSRTYP
COMMAND PNTTYPE PVLLFL SERIALNO
CONTCUT (F) PRIMMOD (F) PVLLPR SFSTS
DAMPING PTDESC PVLLTP (F) SLOTNUM
DECONF PTEXECST PVLOFL SLWSRCID
DLYTIME (F) PTINAL PVLOPR (F) STATE
EUDESC PV PVLOTP (F) STI_EU
HIGHAL (F) PVALDB (F) PVP STISWVER
HIGHALPR (F) PVALDBEU (F) PVRAW STITAG
INPTDIR PVAUTO PVRAWHI TCRNGOPT
KEYWORD PVAUTOST PVRAWLO TF
LASTPV PVCALC PVROCNFL TIMEBASE
LOCUTOFF PVCHAR PVROCNPR (F) UNIT
LRL PVCLAMP PVROCNTP (F) URL
LRV PVEUHI PVROCPFL URV
6
Analog Output

The parameters of the Analog Output Data point are listed below in alphabetical order.
(F) indicates that the parameter is applicable when the PNTFORM = Full.

$CDETAIL NODETYP OPTDIR
$MODESEL (F) NTWKNUM OUTIND
$OLDEVDS OP PNTFORM
ASSOCDSP OPCHAR PNTMODTY
CASREQ (F) OPFINAL PNTNODTY
EUDESC OPIN0 PNTSTATE
KEYWORD OPIN1 PNTTYPE
LOCALMAN OPIN2 PRIMMOD (F)
MODATTR (F) OPIN3 PTDESC
MODE (F) OPIN4 PTEXECST
MODEAPPL (F) OPIN5 RCASOPT
MODEPERM (F) OPOUT0 REDTAG (F)
MODNUM OPOUT1 RINITREQ (F)
NAME OPOUT2 SLOTNUM
NMODATTR (F) OPOUT3 STDBYMAN
NMODE (F) OPOUT4 UNIT
NODENUM OPOUT5

7
Array

The parameters of the Array Data point are listed below in alphabetical order.
This point is only available in the Full form.

$CDETAIL NFLAG STR32
AB_DATA1 NN STR64
AB_DATA2 NNDESC STRDESC
AB_DATA3 NNUMERIC STRLEN
AB_DATA4 NNSTIX STRSTIX
ASSOCDSP NODENUM STSMSG
AUXDATA1 NODETYP TIME
AUXDATA2 NSTRING TIMEDESC
AUXDATA3 NTIME TIMESECS
AUXDATA4 NTWKNUM TIMESTIX
BADPVFL (F) OVERLAP UNIT
DEVADDR PNTFORM USERID
ERRCODE PNTNODTY
EXTDATA PNTTYPE
FL PRIMMOD (F)
FLDESC PTDESC
FLSTIX SCANPRI
FTANUM SLOTNUM
INITREQ SPLOCK
IOPNUM STR8
KEYWORD STR16
8
APM Box

The parameters of the Advanced Process Manager Box Data Point are listed below in alphabetical order.

BADPVTXT IOLPERSW LSIOLORN NODESTS SAFOPCMD
CHPINOPR IOMCARD LSPPXORN NODETYP SCANRATE
CRIOLORN IOMCHAER LSUCNORN NODFSTAT SCANPER
CRUCNORN IOMCHASL MDMHWREV NPMSLOT SECOND
CRPPXORN IOMCHBER MINUTE NPVSLOT SEQPRGSZ
CTLOPT IOMCHBSL MONTH NSTRING SEQPROC
CTLPATCH IOMCMD MOVPVTXT NTIME STR8
CYCLETIM IOMCOMER NARRSLOT NTIMER SUMSLTSZ
DATE IOMFILE NCTLSLOT PKGOPT SWTCHACT
DAY IOMOPER NDCSLOT PMMCHAER TMCMD
DB_VALID IOMREALT NDEVSLOT PMMCHASL TMPV
EUNDESC IOMRECHN NFASTCTL PMMCHBER TMSP
FL IOMSEVER NFASTDC PMMCHBSL TMRV
FTA1TYPE IOMSTS NFASTDEV PMMCMD TMSP
FTA2TYPE IOMTYPE NFASTLOG PMMCOMER TMSO
HOUR IONTOKEN NFASTPV PMMCTLST TMST
IOLASTS IOP NFLAG PMMFLPOS TMTB
IOLBSTS IOPNUM NLOGSLOT PMMOPER UTSDRIFT
IOLCHAER IOPSTR1 NN PMMRECCH USTSNODE
IOLCHASL IOPSTR2 NNUMERIC PMMSEVER UTSTBCRV
IOLCHBER IORECCHN NODEASSN PMMSFSTS UTSTIME
IOLCHBSL IOSTKNDR NODECMD PMMSTS UTSTIMST
IOLCHERT IOSSTS NODECONF POSITION WEEKDAY
IOLCMD IOTKNSTL NODENUM RJTEMP YEAR
9
Box Flag

The parameters of the Box Flag Data Point are listed below in alphabetical order. (F) indicates that the Parameter is
applicable when the PNTFORM = Full; an * indicates that the parameter is applicable to Flag slots 1-128.

$AUXUNIT (F) NAME PVFL
$CDETAIL NODENUM S0BOXCLR
ALENBST (F)* NTWKNUM S1BOXCLR
ALPRIOR* NODETYP SLOTNUM
ASSOCDSP OFFNRMPR (F) STATE0
BOXCLR PNTNODTY STATE1
CONTCUT (F)* PNTTYPE STATETXT
EIPPCODE (F)* PNTFORM UNIT
EUDESC PRIMMOD (F)*
HIGHAL (F)* PTDESC (F)
KEYWORD PV

10