Parker Pneumatic Products Air Control Valves and Accessories

708 Pages·2011·35.78 MB·English

aerospace
climate control
electromechanical
filtration
fluid & gas handling
hydraulics
pneumatics
process control
sealing & shielding
Pneumatic Products
Air Control Valves & Accessories
Catalog 0600P-E
ENGINEERING YOUR SUCCESS.
Catalog 0600P-E Air  Preparation  Products
Warning,  Offer  of  Sale
          !  WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN 
OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
This document and other information from Parker Hannifin  Corporation, its subsidiaries and authorized distributors provide 
product and/or system options for further investigation by users h aving technical expertise.   It is important that you analyze all 
aspects of your application including consequences of any failure, and review the information concerning the product or system 
in the current product catalog.   Due to the variety of operating conditions and applications for these products or systems, the 
user, through its own analysis and testing, is solely responsible for making the final  selection of the products and systems 
and assuring that all performance, safety and warning requirements of the application are met.
The products described herein, including without limitation, product features, specifications,  designs, availability and pricing, 
are subject to change by Parker Hannifin  Corporation and its subsidiaries at any time without notice.
Offer  of  Sale
The  items  described  in  this  document  are  hereby  offered  for  sale  by  Parker  Hannifin   Corporation,  its  subsidiaries  or  its 
authorized  distributors.   This  offer  and  its  acceptance  are  governed  by  the  provisions  stated  on  the  separate  page  of  this 
document entitled “Offer of Sale”.
© Copyright 2010-2005 Parker Hannifin  Corporation. All Rights Reserved
Parker Hannifin  Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
DISTRIBUTION NETWORK
At Parker, we have the largest global distribution
network in motion and control, with over 7,500
distributors serving more than 422,000 customers.
To find the distributor nearest you, please
visit our DISTRIBUTOR LOCATOR at
http://www.parker.com/pneu/distributor
ENGINEERING YOUR SUCCESS.
Catalog 0600P-E Pneumatic Products
Index
Introduction • Valve Selector Chart (By Flow) • Fieldbus Solutions Guide A
• Fluid Power Graphic Symbols • Technical Information • 5-Year Warranty
“XM” Series • Direct Acting Solenoid • 3-Way & 4-Way • Inline • IEM Bar Manifold www.parker.com/pneu/xm
• Subbase Valve Manifolds • .15 Cv B
Direct Acting
15mm Solenoid Valve • Compact & Simplified Design • Subbase or Manifold Option • 3-Way www.parker.com/pneu/15mm
• NO & NC on Same Manifold • Wide Range of Voltage • .033 to .05 Cv
Moduflex Series • Stand Alone Valves • Valve Island • Collective Wiring or Fieldbus Configuration • 3-Way & 4-Way www.parker.com/pneu/moduflex
• Modular & Flexible Design • Multiple Pressure Option • Compact & Low Weight • .18 to .80 Cv C
Stacking
“PVL” Series • Compact Composite Design • Modular with a Wide Range of Voltages • 3-Way & 4-Way www.parker.com/pneu/pvl
• Fieldbus Available • .6 to 1.2 Cv
Viking Lite • www.parker.com/pneu/viking
Viking Xtreme • Extreme Temperature & Pressure Ranges • ATEX Options • 4-Way www.parker.com/pneu/vikingx
• Wide Range of Voltages for Mobile Industries • Unique Overmoulded Spool Technology • .7 to 2.7 Cv
Inline “B” Series • Wide Range of Sizes & Flows • Multiple Options • IEM Bar Manifold • 3-Way & 4-Way www.parker.com/pneu/b D
• Wear Compensating Dynamic Sealing System • .75 to 7.0 Cv
“ADEX” Series • 10mm 3-Way • 15mm & 20mm 4-Way • Low Power Consumption www.parker.com/pneu/adex
• Subbase & Inline Body • Individual & Collective Wiring Solutions • .01 to.47 Cv
“N” Series • Robust Poppet Design • Fast Response & High Flow • 2-Way & 3-Way www.parker.com/pneu/n
• High Maximum Pressure Option • 3.6 to 29.9 Cv
Isys Micro Series • Compact Valves with High Flow • Innovative Back to Back Mounting Style with 4 Valves www.parker.com/pneu/isysmicro
in a 42mm Width • Plug-in Design with Collective Wiring on Fieldbus or 25 Pin Cable • .35 Cv
Isys ISO Series • ISO Valve Platform, 18mm, 26mm, Size 1, Size 2, & Size 3 Plug-in • Collective Wiring on Fieldbus or www.parker.com/pneu/isys
25-Pin or M23 Cable • Non Plug-in Valves with 3-Pin Din or Mini Connectors • .55 to 6.0 Cv
Subbase &
E
Fieldbus Systems • Isys Micro Fieldbus • Moduflex Fieldbus • Isysnet Fieldbus • Turck Fieldbus www.parker.com/pneu/isysnet
Manifold
“DX” ISOMAX Series • ISO Valve Platform, 18mm, 26mm, Size 1, Size 2, & Size 3 www.parker.com/pneu/isomax
• Non Plug-in Valves with 3-Pin Din or Mini Connectors • .55 to 4.15 Cv
Valvair II • Robust Spool Design • Fast Response & High Flow • Plug-in & Direct Pipe Design • 4-Way www.parker.com/pneu
• Hazardous Duty Option • 1.9 to 12.0 Cv
Directair 2 & 4 Series, Manual / Mechanical • Robust Poppet & Spool Designs • 3-Way & 4-Way • Manual & Mechanical • Plunger, Roller, www.parker.com/pneu/directair
One-Way Tripper, Button, Hand Lever, Togglel, Treadle • 1/8" & 1/4" NPT • .17 to .83 Cv
“42” Lever / Pedal Series • Heavy Duty Design • 4-Way • Lever, Pedal Operated • 1/4" & 3/8" NPT • 1.3 to 2.8 Cv www.parker.com/pneu/42ser
Manual / Viking Xtreme Lever Series • Heavy Duty Lever Operated • 4-Way • 1/8 to 1/2" NPT • .7 to 2.7 Cv www.parker.com/pneu/vikingx
F
Mechanical
“M0” Series • Heavy Duty Design • Bronze Body • 3-Way & 4-Way, Air Pilot Manual & Mechanical Valves www.parker.com/pneu
• 1/4" to 1" NPTF Ports • 2.4 to 12.4 Cv
“LV” / “EZ” Lockout Valves • Compliant with OSHA Standard 29 CFR 1910 www.parker.com/pneu/lockout
• Lockout / Soft Start • 3.7 to 14.0 Cv
Brass Poppet / Sliding Seal / “PL”/“VL” / “HV” • Manual Valves • Lever & Button Operators • 1/8" thru 1/2" Ports www.parker.com/pneu/ssv
• Wide Range of Sizes & Flows • .5 to 1.25 Cv
Control Panel Products • Variety of Control Panel Options - Push Buttons - Indicators - Foot Pedals www.parker.com/pneu/cpp
• Large Selection of Options • Two-Hand Control Conformance with EN 574
Accessories Sensing • Large Variety of Limit & Pressure Switches • Limit Switches for Standard & Heavy Duty Service www.parker.com/pneu/limsen G
• Blocking Valves for Air, Gas & Liquid Service • Threshold Sensors for Monitoring Cylinder Exhaust
Flow Controls & Accessories • Flow Controls • Check Valves • Needle Valves • Muffler & Silencers • Relief Valves www.parker.com/pneu/accessories
• Quick Exhaust Valves • Ball Valves • Fittings • Tubing & Hose • Quick Couplings
H
Model Number to Page Number Index, Safety Guide, Offer of Sale • Model Number to Page Number Index • Safety Guide • Offer of Sale
2 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E Pneumatic Products
Index
Introduction • Valve Selector Chart (By Flow) • Fieldbus Solutions Guide A
• Fluid Power Graphic Symbols • Technical Information • 5-Year Warranty
“XM” Series • Direct Acting Solenoid • 3-Way & 4-Way • Inline • IEM Bar Manifold www.parker.com/pneu/xm ng
Direct Acting • Subbase Valve Manifolds • .15 Cv B Acti
15mm Solenoid Valve •• CNoOm &p aNcCt &on S Simampleifi Meda nDiefoslidg n• •W Sidueb bRaasneg oer o Mf Vanoilftoalgde O• p.0ti3o3n t•o 3 .-0W5a Cyv www.parker.com/pneu/15mm Direct
Moduflex Series • Stand Alone Valves • Valve Island • Collective Wiring or Fieldbus Configuration • 3-Way & 4-Way www.parker.com/pneu/moduflex g
• Modular & Flexible Design • Multiple Pressure Option • Compact & Low Weight • .18 to .80 Cv C n
Stacking ki
c
a
“PVL” Series • Compact Composite Design • Modular with a Wide Range of Voltages • 3-Way & 4-Way www.parker.com/pneu/pvl St
• Fieldbus Available • .6 to 1.2 Cv
Viking Lite • Inline valve. Optional aluminum bar manifolds • 3 valve sizes: 1/8, 1/4 & 3/8. CV: 0.6 to 2.5 www.parker.com/pneu/viking
• Pressures up to 145 PSIG & temperatures between 14°F to 122°F • Bi-directional WCS spool
Viking Xtreme • Extreme Temperature & Pressure Ranges • ATEX Options • 4-Way www.parker.com/pneu/vikingx
• Wide Range of Voltages for Mobile Industries • Unique Overmoulded Spool Technology • .7 to 2.7 Cv
Inline “B” Series • Wide Range of Sizes & Flows • Multiple Options • IEM Bar Manifold • 3-Way & 4-Way www.parker.com/pneu/b D ne
• Wear Compensating Dynamic Sealing System • .75 to 7.0 Cv nli
I
“ADEX” Series • 10mm 3-Way • 15mm & 20mm 4-Way • Low Power Consumption www.parker.com/pneu/adex
• Subbase & Inline Body • Individual & Collective Wiring Solutions • .01 to.47 Cv
“N” Series • Robust Poppet Design • Fast Response & High Flow • 2-Way & 3-Way www.parker.com/pneu/n
• High Maximum Pressure Option • 3.6 to 29.9 Cv
Isys Micro Series • Compact Valves with High Flow • Innovative Back to Back Mounting Style with 4 Valves www.parker.com/pneu/isysmicro
in a 42mm Width • Plug-in Design with Collective Wiring on Fieldbus or 25 Pin Cable • .35 Cv
Isys ISO Series • I2S5O-P Vina lover MPl2a3tf oCramb,l e1 8• mNomn, P2l6umg-min, VSaizlvee 1s, wSiitzhe 32-,P &in S Dizine 3o rP Mluign-i inC o•n Cnoelcletocrtisv e• .W55ir itnog 6 o.0n CFiveldbus or www.parker.com/pneu/isys nifold
Subbase & a
E M
Fieldbus Systems • Isys Micro Fieldbus • Moduflex Fieldbus • Isysnet Fieldbus • Turck Fieldbus www.parker.com/pneu/isysnet &
Manifold e
s
a
“DX” ISOMAX Series • ISO Valve Platform, 18mm, 26mm, Size 1, Size 2, & Size 3 www.parker.com/pneu/isomax ubb
• Non Plug-in Valves with 3-Pin Din or Mini Connectors • .55 to 4.15 Cv S
Valvair II • Robust Spool Design • Fast Response & High Flow • Plug-in & Direct Pipe Design • 4-Way www.parker.com/pneu
• Hazardous Duty Option • 1.9 to 12.0 Cv
Directair 2 & 4 Series, Manual / Mechanical • Robust Poppet & Spool Designs • 3-Way & 4-Way • Manual & Mechanical • Plunger, Roller, www.parker.com/pneu/directair
One-Way Tripper, Button, Hand Lever, Togglel, Treadle • 1/8" & 1/4" NPT • .17 to .83 Cv
“42” Lever / Pedal Series • Heavy Duty Design • 4-Way • Lever, Pedal Operated • 1/4" & 3/8" NPT • 1.3 to 2.8 Cv www.parker.com/pneu/42ser
al
c
Manual / Viking Xtreme Lever Series • Heavy Duty Lever Operated • 4-Way • 1/8 to 1/2" NPT • .7 to 2.7 Cv www.parker.com/pneu/vikingx F chani
e
M
Mechanical “M0” Series • Heavy Duty Design • Bronze Body • 3-Way & 4-Way, Air Pilot Manual & Mechanical Valves www.parker.com/pneu al
• 1/4" to 1" NPTF Ports • 2.4 to 12.4 Cv nu
a
M
“LV” / “EZ” Lockout Valves • Compliant with OSHA Standard 29 CFR 1910 www.parker.com/pneu/lockout
• Lockout / Soft Start • 3.7 to 14.0 Cv
Brass Poppet / Sliding Seal / “PL”/“VL” / “HV” • Manual Valves • Lever & Button Operators • 1/8" thru 1/2" Ports www.parker.com/pneu/ssv
• Wide Range of Sizes & Flows • .5 to 1.25 Cv
Control Panel Products • Variety of Control Panel Options - Push Buttons - Indicators - Foot Pedals www.parker.com/pneu/cpp
• Large Selection of Options • Two-Hand Control Conformance with EN 574
s
e
Accessories Sensing • Large Variety of Limit & Pressure Switches • Limit Switches for Standard & Heavy Duty Service www.parker.com/pneu/limsen G sori
• Blocking Valves for Air, Gas & Liquid Service • Threshold Sensors for Monitoring Cylinder Exhaust es
c
c
A
Flow Controls & Accessories • Flow Controls • Check Valves • Needle Valves • Muffler & Silencers • Relief Valves www.parker.com/pneu/accessories
• Quick Exhaust Valves • Ball Valves • Fittings • Tubing & Hose • Quick Couplings
H
Model Number to Page Number Index, Safety Guide, Offer of Sale • Model Number to Page Number Index • Safety Guide • Offer of Sale
3 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E Pneumatic Products
Valve Selector Chart (By Flow) Index
A PORT SIZE OPERATORS
SeleVa SVEARLIVEES (4T5um/3bm2e) 1MM30235- 1/8 1/4 T1u/b4e 3/8 T3u/b8e 1/2 3/4 1 11--t11o// 42 PONoROfT . S FLOW (Cv) SinglDeireDctouSbolelenSoPiiidnlogtl eOpeDroautebdle MMecahnaunailc/a l Single AiDr o u ble
ctiolve A00 X 3 .01 X
n 15mm X 3 .033 X
SolutioFieldb AX0M5 X X X 35/4 ..1158 X X X
nsus Moduflex X X X 3/4 0.18-0.80 X X X X
S DA2 X 3/5 .20 X
y
m HM X X 5 .35 X X
b
o A12 X X 5 .47 X X
ls
Sliding Seal X X 3/4 .5 - 1.25 X
T
e
Inch DX02 X 5 .55 X X X X
fonic HB X 5 .55 X X X X
a
l PVLB X X 5 .6 X X X X
W
a PVLB10 X X 5 .6 X X
r
ra P2LAZ X 5 .6 X X
n
ty P2LAX X 5 .7 X X X X X

DX01 X 5 .75 X X X X
B3 X X 3/5 .75 X X X X
DA4 X 3/5 .84 X
Brass Poppet X 2/3 .94 X
HA X 5 1.1 X X X X
DX1 X X 5 1.15 X X X X
PVLC X X 5 1.2 X X X X
PVLC10 X X 5 1.2 X X
P2LBX X 5 1.3 X X X X
42 Manual X X 5 1.3 - 2.8 X
B5 X X 3/5 1.4 X X X X
P2LBX X 5 1.5 X X
H1 X X 5 1.5 X X X X
Valvair II X X X X 5 1.9 - 12.0 X X X X
PL / VL X X X 4 2.2 - 5.3 X
DX2 X X 5 2.5 X X X X
P2LCZ X 5 X X
P2LCX X 5 2.5 X X X X
P2LDX X 5 2.7 X X X X
B6 X 3/5 2.7 X X X X
H2 X X 5 3.0 X X X X
LV / EZ X X X X X 3 3.0 - 13.7 X
N X X X X X X 3 3.6 - 29.9 X X
DX3 X X 5 4.15 X X X X
B7 X 3/5 5.8 X X X X
H3 X X 5 6.0 X X X X
B8 X 3/5 7.0 X X X X
Notes:
1) Some Valve Series can operate below 35 PSIG with the use of an external pilot supply. Consult the individual Technical Data page for any valve in question.
2) WCS – Wear Compensation System – Unique seals installed on the spool expand radially under pressure and compensate for wear during extended operation.
4 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E Pneumatic Products
Valve Selector Chart (By Flow) Index
A
TYPE POSITIONS MOUNTING PRESSURE
RANGE TEMPERATURE VALVE
2 3 4 3 Single Manifold PSIG RANGE CONSTRUCTION SERIES SECTION
2 Inline Stacking n
Way WXay Way APXB CE P C SubXbase Individual BXar V(NAoCt-e1 010) 32 – 122°F Poppet A00 D alve ectio
Vel
X X X X VAC-145 5 – 140°F Poppet 15mm B S
X X X X X X VAC-125 32 – 125°F Poppet XM B us ns
bo
X X XX XX XX XX X X XX X VVAACC--110200 352 –– 114202°°FF WWCCSS ((NNoottee 22)) MoAd0u5flex DC FieldSoluti
X X X X VAC-150 32 – 175°F Poppet/Spool DA2 F s
ol
X X X X X X VAC -145 5 – 140°F WCS (Note 2) HM E b
m
X X X X X X X VAC-100 32 – 122°F WCS (Note 2) A12 D y
S
X X X X X VAC-200 -40 – 212°F Lapped Disc Sliding Seal F al
X X X X X X VAC-145 14-140°F Ceramic Spool DX02 E hnicnfo
X X X X X X X VAC-145 5 – 120°F WCS (Note 2) HB E cI
e
X X X X X X 30-150 5 – 140°F Lip Seal PVLB C T
y
X X X X X 30-150 5 – 140°F Lip Seal PVLB10 C nt
a
X X X X X X VAC-145 14-122°F WCS (Note 2) P2LAZ D r
r
a
X X X X X X X X VAC-232 -40 – 158°F Overmold Seal P2LAX D W

X X X X X X VAC-145 14-140°F Ceramic Spool DX01 E
X X X X X X X X X X VAC-145 5 – 120°F WCS (Note 2) B3 D
X X X X X X X VAC-150 32 – 175°F Packed Bore DA4 F
X X X X X 0-150 -20 – 180°F Poppet Brass Poppet F
X X X X X X X VAC-145 5 – 120°F WCS (Note 2) HA E
X X X X X X X VAC-145 14-140°F Ceramic Spool DX1 E
X X X X X X 30-150 5 – 140°F Lip Seal PVLC C
X X X X X 30-150 5 – 140°F Lip Seal PVLC10 C
X X X X X X X X VAC-232 -40 – 158°F Overmold Seal P2LBX D
X X X X X VAC-150 0 – 160°F Overmold Seal 42 Manual F
X X X X X X X X X VAC-145 5 – 120°F WCS (Note 2) B5 D
X X X X X X X X VAC-145 14-122°F WCS (Note 2) P2LBZ D
X X X X X X X VAC-145 5 – 120°F WCS (Note 2) H1 E
X X X X X VAC-225 0 – 200°F Packed Bore Valvair II E
X X X X X 0-150 0 – 160°F Lapped Disc PL / VL F
X X X X X X VAC-145 14-140°F Ceramic Spool DX2 E
X X X X X X X X VAC-145 14-122°F WCS (Note 2) P2LCZ D
X X X X X X X X VAC-232 -40 – 158°F Overmold Seal P2LCX D
X X X X X X X X VAC-232 -40 – 158°F Overmold Seal P2LDX D
X X X X X X X X VAC-145 5 – 120°F WCS (Note 2) B6 D
X X X X X X X VAC-145 5 – 120°F WCS (Note 2) H2 E
X X X 0-250 32 – 175°F Poppet LV / EZ F
X X X X VAC-250 0 – 150°F Poppet N D
X X X X X X X VAC-145 14-140°F Ceramic Spool DX3 E
X X X X X VAC-145 5 – 120°F WCS (Note 2) B7 D
X X X X X X X VAC-145 5 – 120°F WCS (Note 2) H3 E
X X X X X X VAC-145 5 – 120°F WCS (Note 2) B8 D
Notes:
1) Some Valve Series can operate below 35 PSIG with the use of an external pilot supply. Consult the individual Technical Data page for any valve in question.
2) WCS – Wear Compensation System – Unique seals installed on the spool expand radially under pressure and compensate for wear during extended operation.
5 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E Pneumatic Products
Index Fieldbus Solutions
A Protocol Fieldbus Valve Max. Flow Subnet Page
Add. I/O
Solution Platform Sol. Range Feature Number
S
eleVa Turck Isys Micro 256 Any combination 0.30-0.35 Cv CANopen E1-E30
ctiolve Isys ISO 256 up to 256 0.45-6.0 Cv expansion E31-E102
n
Bus
SF Isysnet Isys Micro 128* 256 In & 256 Out 0.30-0.35 Cv expansoion on E1-E30
olutioieldb Isys ISO 32 0.45-6.0 Cv Isys Micro E31-E102
nsus Isys Micro 16 0.30-0.35 Cv E1-E30
Moduflex Isys ISO 16 — 0.45-6.0 Cv — E31-E102
S
y Moduflex 16 0.18-0.80 Cv C1-C57
m
b
o CANopen
ls Isys Micro 256 Any combination 0.30-0.35 Cv expansion & E1-E30
Turck
Te Isys ISO 256 up to 256 0.45-6.0 Cv DeviceNet E31-E102
Inch subnet
fonica Isys Micro 128* 0.30-0.35 Cv Bus E1-E30
l Isysnet 256 In & 256 Out expansoion on
W Isys ISO 32 0.45-6.0 Cv E31-E102
Isys Micro
a
r
r
anty TM Isysnet Isys Micro 128* 256 In & 256 Out 0.30-0.35 Cv expanBsuosio n on E1-E30
Isys ISO 32 0.45-6.0 Cv E31-E102
Isys Micro
Isys Micro 256 Any combination 0.30-0.35 Cv CANopen E1-E30
Turck
Isys ISO 256 up to 256 0.45-6.0 Cv expansion E31-E102
Bus
Isys Micro 128* 0.30-0.35 Cv E1-E30
Isysnet 256 In & 256 Out expansoion on
Isys ISO 32 0.45-6.0 Cv E53-E164
Isys Micro
Isys Micro 16 0.30-0.35 Cv E1-E30
Moduflex Isys ISO 16 — 0.45-6.0 Cv — E31-E102
Moduflex 16 0.18-0.80 Cv C1-C57
Isys Micro 256 Any combination 0.30-0.35 Cv CANopen E1-E30
INDUSTRIAL ETHERNET Turck
Isys ISO 256 up to 256 0.45-6.0 Cv expansion E31-E102
CANopen
Modbus/TCP Isys Micro 256 Any combination 0.30-0.35 Cv expansion & E1-E30
Turck
Isys ISO 256 up to 256 0.45-6.0 Cv DeviceNet E31-E102
subnet
Isys Micro 8 0.30-0.35 Cv E1-E30
Moduflex Isys ISO 8 8 In 0.45-6.0 Cv — E31-E102
Moduflex 8 0.18-0.80 Cv C1-C57
Isys Micro 256 Any combination 0.30-0.35 Cv CANopen E1-E30
Turck
Isys ISO 256 up to 256 0.45-6.0 Cv expansion E31-E102
Isys Micro 16 0.30-0.35 Cv E1-E30
Moduflex Isys ISO 16 — 0.45-6.0 Cv — E31-E102
Moduflex 16 0.18-0.80 Cv C1-C57
Isys Micro 16 0.30-0.35 Cv E1-E30
IINNTTEERRBBUUSS--SS Moduflex Isys ISO 16 — 0.45-6.0 Cv — E31-E102
Moduflex 16 0.18-0.80 Cv C1-C57
*128 Solenoids possible with Bus Extension functionality. Up to 4 manifolds with 32 solenoids each can be control with a
single communication module.
6 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E Pneumatic Products
Isysnet & Moduflex Fieldbus Solutions
Isysnet Fieldbus Solution A
Isysnet fieldbus offers full functionality for large, complex machines using many valves, inputs, and outputs.
• Digital inputs and outputs, analog inputs and outputs, and high watt relay outputs available. n
• Up to 256 inputs and 256 outputs can be configured on a single node. alve ectio
Valve Platforms Vel
S
Isys Micro The Isys Micro is designed with an innovative back-to-back us ns
valve mounting style where 4 valves are assembled on a bo
4w2idmthm. wide manifold, producing an equivalent 10.5mm valve FieldSoluti
By incorporating bus expansion capability, the Isys Micro with s
Isysnet is able to take full advantage of fieldbus systems. Up bol
to 4 Valve Driver Modules, controlling 32 solenoids each, can m
y
be coupled to a single fieldbus node. With additional input S
and output modules at each expansion point, a full 256 inputs al
Isys ISO and 256 outputs can be connected, offering a simple wiring c
solution for the machine. hninfo
cI
e
The Isys ISO valve line offers a complete ISO valve package, T
conforming to ISO specification 15407 for 18mm and 26mm y
wide valves, and ISO specification 5599 for the larger ISO nt
a
size 1, 2, and 3 valves. rr
a
W
Additional Features – Preferred Connectivity

By partnering with Rockwell Automation, Isysnet provides a fieldbus solution with Preferred
Connectivity to the Rockwell Automation LogixTM Architecture. Because all the information
needed for the device profile is already loaded into the Allen Bradley RSLogix5000TM software,
configuration time is reduced by up to 70%.
The configuration process is reduced from 4 clicks and 7 data fields to merely 3 clicks, with no
additional values for the user to find and enter. This means there are no installation manuals to
search through, no chance of entering incorrect information, and you can work with confidence
knowing the device is configured properly.
Moduflex Fieldbus Solution
Moduflex fieldbus offers a low cost fieldbus connection for manifolds with fewer solenoids and no additional inputs and outputs,
except for AS-i which has 8 inputs.
• Fieldbus connection for up to 16 solenoids.
• AS-i protocol provides a connection for up to 8 solenoids and 8 inputs.
Valve Platforms
Moduflex Moduflex offers the complete choice of stand-alone and manifold systems.
The ability to mount size 1 (0.3 Cv) valves and size 2 (0.8 Cv) valves on the
same manifold give the machine builder the opportunity to maximize the valve
system for the application. With functions such as dual 4/2 and dual 3/2 there
will be opportunities for space and cost savings. Moduflex gives maximum
flexibility to assemble each automation system step by step using modules to
expand islands, control flow, and have multiple pressures or functions.
Isys Micro
The Isys Micro is designed with an innovative back-to-back valve mounting
style where 4 valves are assembled on a 42mm wide manifold, producing an
equivalent 10.5mm valve width.
Isys ISO The Isys ISO valve line offers a complete ISO valve package, conforming
to ISO specification 15407 for 18mm and 26mm wide valves, and ISO
specification 5599 for the larger ISO size 1, 2, and 3 valves.
7 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Catalog 0600P-E (Revised 01-12-12) Pneumatic Products
Chart Fluid Power Graphic Symbols
A Air Preparation Units Pneumatic Valves Cylinders
Symbol Description Symbol Description Symbol Description
S
electioValve wFiitlhte mr a/n Suaelp darariantor 3po-Prtso csliotsioedn,, c4e-nWtera py,o sA.PB Sdotuabnled aacrdting
n Filter / Separator
SolutionFieldbu Owiitlh Rauetmomoavtaicl dFrailitne r 35ceyx--lhPPinaooduesrsrtti etpinidoo crntes,n o4tep-reW pno atsoyit,i oCnE SDionugblele A Rcotidng
ss 3-Position, 4-Way, PC
5-Ported
S Automatic Drain
ym pexrehsasuusrte i np ocretns toerp epno stiotion Spring Return
b
o Lubricator
ls less drain Ram Type
Te Lubricator Quick Exhaust
Inch with manual drain Telescope
fonic Lubricator
al with automatic filling Tandum
W
a Shuttle
r
ra Air Line Pressure Duplex
n
ty Regulator
adjustable, relieving

Lines and Functions
Air Line Pressure
Valve Actuators
Regulator Symbol Description
pilot controlled, Symbol Description Solid Line – Main Line
relieving
Dashed Line – Pilot Line
(cid:30)
Filter / Regulator Manual
(piggyback) manual general symbol Dotted Line – Exhaust
drain relieving or Drain Line
(with gauge) Center Line –
Enclosure Outline
Push Button
Filter / Regulator
Lines Crossing
(piggyback) auto
drain relieving (90° intersection not necessary)
Lever
(cid:30) Lines Joining
Air Line Combo (90° intersection not necessary)
Pedal or Treadle
F-R-L
simplified Lines Joining
Mechanical
Flow Direction
cam, toggle, etc.
hydraulic medium
Pneumatic Valves
Flow Direction
Spring
Symbol Description gaseous medium

Check Detent Energy Source
line indicates which
detent is in use Line with Fixed
Restriction
Flow Control
Piezo
Line with Adjustable
Restriction
Solenoid
Relief Valve
Flexible Line
Internal
Pilot Supply Plugged Port, Test Station,
2-Position, 2-Way Power Take-off
Remote
Pilot Supply connected Quick Disconnect
2-Position, 3-Way complete simplified disconnected Without Checks
And / Or Composite
solenoid and pilot or connected Quick Disconnect
2-Position, 4-Way
manual override disconnected With Checks
2-Position, 4-Way And / Or Composite connected Quick Disconnect
5-Ported solenoid and pilot or With One Check
manual override and pilot disconnected
8 Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics