Top 17 awwa PDF Book
AWWA B202-13 Quicklime and Hydrated Lime
awwa
·32 Pages
·2013
·0.815 MB
AWWA Standard C530-12 Pilot Operated Control Valves
AWWA
·32 Pages
·2012
·0.811 MB
AWWA standard for underground service line valves and fittings
AWWA
·38 Pages
·2013
·0.96 MB
AWWA C214-14 Tape Coatings for Steel Water Pipe
AWWA
·32 Pages
·2014
·0.907 MB
AWWA standard for double check valve backflow-prevention assembly
American Water Works Association.; American National Standards Institute
·18 Pages
·1990
·0.963 MB
AWWA standard for dimensions for fabricated steel water pipe fittings
American Water Works Association.; American National Standards Institute
·31 Pages
·1983
·1.043 MB
AWWA standard : cement-mortar lining for ductile-iron pipe and fittings
American National Standards Institute.; American Water Works Association
·24 Pages
·2008
·0.228 MB
AWWA Manual M11 Steel Pipe—A Guide for Design and Installation, 4th ed.
265 Pages
·2005
·14.11 MB
Awwa B130-13 Membrane Bioreactor Systems
Association, American Water Works
·35 Pages
·2012
·0.681 MB
AWWA standard for cement-mortar protective lining and coating for steel water pipe : 4 in. and larger-- shop applied
American Water Works Association.; American National Standards Institute
·36 Pages
·1989
·0.463 MB
Operational Guide to AWWA Standard G400: Utility Management Systems
James F. Ginley, Todd Humphrey
·82 Pages
·2009
·3.959 MB
AWWA standard for resilient-seated gate valves for water supply service
American National Standards Institute.; American Water Works Association
·36 Pages
·1994
·1.627 MB
ANSI/AWWA C223-13 : fabricated steel and stainless steel tapping sleeves
28 Pages
·2013
·0.816 MB
ANSI/AWWA C701-15 : cold-water meters--turbine type, for customer service
36 Pages
·2015
·0.936 MB
AWWA standard for reduced-wall, resilient-seated gate valves for water supply service
American National Standards Institute.; American Water Works Association
·36 Pages
·1999
·1.598 MB
AWWA standard [for] fused polyolefin coating systems for the exterior of steel water pipelines
American Water Works Association.; American National Standards Institute
·28 Pages
·2008
·0.415 MB
AWWA standard for polyvinyl chloride (PVC) pressure pipe : 4 in through 12 in., for water
American Water Works Association
·44 Pages
·1981
·0.577 MB
