Top 225 astm PDF Book Page 9
Aggregate Contribution to Hot Mix Asphalt (HMA) Performance (ASTM special technical publication, 1412)
Thomas D. White, Sam R. Johnson, John J. Yzenas (editors)
·204 Pages
·2001
·3.595 MB
Manual on Elastic-Plastic Fracture: Laboratory Test Procedures (Astm Manual Series, Mnl 27)
J. A. Joyce
·103 Pages
·1996
·10.362 MB
Materials Characterization by Dynamic and Modulated Thermal Analytical Techniques (ASTM special technical publication, 1402)
Lawrence Judovits (Editor) Alan T. Riga (Editor)
·216 Pages
·2001
·3.384 MB
Modern Stone Cladding: Design and Installation of Exterior Dimension Stone Systems (ASTM Manual Series)
Michael D. Lewis
·146 Pages
·1995
·13.807 MB
Fatigue and Fracture of Medical Metallic Materials and Devices (ASTM special technical publication, 1481)
Michael R. Mitchell and Kenneth L. Jerina, editors
·125 Pages
·2007
·26.488 MB
Repair, Retrofit and Inspection of Building Exterior Wall Systems (ASTM special technical publication, 1493)
Paul G. Johnson and Jon M. Boyd, editors
·252 Pages
·2009
·20.424 MB
Multiple Stressor Effects in Relation to Declining Amphibian Populations (ASTM special technical publication, 1443)
Gregory L. Linder, Sherry Krest, Don Sparling and Edward E. Little, editors
·285 Pages
·2003
·4.982 MB
Manual on Flash Point Standards and Their Use: Methods and Regulations (Astm Manual Series)
Harry A. Wray, American Society for Testing and Materials
·177 Pages
·1992
·4.279 MB
Designing Cathodic Protection Systems for Marine Structures and Vehicles (ASTM Special Technical Publication, 1370)
Harvey P. Hack
·119 Pages
·1999
·2.382 MB
Evaluation and Remediation of Low Permeability and Dual Porosity Environments (ASTM Special Technical Publication, 1415)
Martin N. Sara, Lorne G. Everett (editors)
·193 Pages
·2002
·3.691 MB
The Basics of Testing Plastics: Mechanical Properties, Flame Exposure, and General Guidelines (Astm Manual Series)
Stephen Burke Driscoll
·72 Pages
·1998
·6.38 MB
Paint and Coating Testing Manual: Fourteenth Edition of the Gardner-Sward Handbook (Astm Manual Series)
J. V. Koleske
·920 Pages
·1995
·28.339 MB
Manual on Selection and Use of Engine Coolants and Cooling System Chemicals (Astm Manual Series)
Joseph A. Lima
·19 Pages
·1989
·0.458 MB
Relating Consumer, Descriptive, and Laboratory Data to Better Understand Consumer Responses: Manual 30 (Astm Manual Series)
Alejandra M. Munoz
·110 Pages
·1997
·5.043 MB
Elemental Analysis of Fuels and Lubricants: Recent Advances and Future Prospects (ASTM special technical publication, 1468)
R. A. Kishore Nadkarni, editor
·282 Pages
·2005
·6.759 MB
Mechanical, Thermal, and Environmental Testing and Performance of Ceramic Composites and Components (ASTM Special Technical Publication, 1392)
Michael G. Jenkins, Edgar Lara-Curzio, and Stephen T. Gonczy, editors
·330 Pages
·2001
·6.428 MB
Performance Tests for Hot Mix Asphalt (HMA) Including Fundamental and Empirical Procedures (ASTM special technical publication, 1469)
Louay Nadhim Mohammad, editor
·216 Pages
·4.394 MB
Guide to ASTM Test Methods for the Analysis of Petroleum Products and Lubricants, 2nd Edition, MNL 44
R. A. Nadkarni
·315 Pages
·2007
·1.624 MB
Pavement Surface Condition Performance Assessment: Reliability and Relevancy of Procedures and Technologies (ASTM special technical publication, 1486)
Bouzid Choubane, editor
·89 Pages
·2007
·2.351 MB
Crosslinked and Thermally Treated Ultra-High Molecular Weight Polyethylene for Joint Replacements (ASTM Special Technical Publication, 1445)
Steven M. Kurtz, Ray A. Gsell, and John Martell, editors
·264 Pages
·2003
·5.757 MB
The Use of Glass in Buildings: 1st Symposium on the Use of Glass in Buildings, 2002, Pittsburgh, Pennsylvania (ASTM Special Technical Publication, 1434)
Valerie L. Block, editor
·176 Pages
·2002
·3.669 MB
